Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-06-12 13:42:55
From: George
Description: former BSD.lv box, late-model i386
OpenBSD 7.3 (GENERIC) #660: Sat Mar 25 11:17:44 MDT 2023
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
real mem = 3203874816 (3055MB)
avail mem = 3128344576 (2983MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 10/23/03, BIOS32 rev. 0 @ 0xfb9a0, SMBIOS rev. 2.2 @ 0xf0800 (41 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 10/23/2003
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices PCI0(S5) HUB0(S5) UAR1(S5) USB0(S1) USB1(S1) USB2(S1) USB3(S1) USBE(S1) MODM(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) 4 CPU 2.40GHz ("GenuineIntel" 686-class) 2.41 GHz, 0f-02-09
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,CNXT-ID,xTPR,PERF,MELTDOWN
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (HUB0)
acpibtn0 at acpi0: PWRB
"PNP0A03" at acpi0 not configured
acpicmos0 at acpi0
"PNP0501" at acpi0 not configured
"PNPB02F" at acpi0 not configured
"PNPB006" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpicpu0 at acpi0: C1(@1 halt!)
acpitz0 at acpi0: critical temperature is 95 degC
bios0: ROM list: 0xc0000/0xa600 0xcc000/0x8000! 0xef000/0x1000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02
inteldrm0 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xf0000000, size 0x8000000
inteldrm0: apic 2 int 16, I865G, gen 2
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 16
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci1 at ppb0 bus 1
rl0 at pci1 dev 1 function 0 "Realtek 8139" rev 0x10: apic 2 int 17, address [_MAC_XXXXXXXXXX]
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8523B, 1.02> removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
wd0 at pciide0 channel 1 drive 1: <ST3750640NS>
wd0: 16-sector PIO, LBA48, 715404MB, 1465149168 sectors
wd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 2 int 17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC3200CL3.0
spdmem2 at iic0 addr 0x52: 512MB DDR SDRAM non-parity PC3200CL3.0
spdmem3 at iic0 addr 0x53: 512MB DDR SDRAM non-parity PC3200CL3.0
auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: apic 2 int 17, ICH5
ac97: codec id 0x434d4961 (C-Media Electronics CMI9739)
audio0 at auich0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17
lm1 at wbsio0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uhidev0 at uhub1 port 1 configuration 1 interface 0 "DELL Dell USB Entry Keyboard" rev 1.10/1.78 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
softraid0: not all chunks were provided; attempting to bring volume 0 online
softraid0: trying to bring up sd0 degraded
softraid0: sd0 was not shutdown properly
sd0 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd0: 337921MB, 512 bytes/sector, 692063543 sectors
root on sd0a (ca2dec6ddf291814.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
acpitz0: _AL0[0] _PR0 failed
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached