Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2024-01-07 11:19:25
From: Jun Ebihara
Description: NetBSD 10.0_RC2 SONY_VGN-NW50JB
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
    2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
    2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
    2024
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 10.0_RC2 (GENERIC) #0: Mon Jan  1 14:04:52 UTC 2024
	[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 8031 MB
avail memory = 7743 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000F03B0 000024 (v02 Sony  )
ACPI: XSDT 0x00000000B5F12F10 00005C (v01 Sony   VAIO     20090522 MSFT 00010013)
ACPI: FACP 0x00000000B5F07A90 0000F4 (v04 Sony   VAIO     20090522 MSFT 00010013)
ACPI: DSDT 0x00000000B5F09010 007B23 (v01 Sony   VAIO     20090522 INTL 20051117)
ACPI: FACS 0x00000000B5F19E40 000040
ACPI: FACS 0x00000000B5F19D40 000040
ACPI: APIC 0x00000000B5F11F10 00006C (v02 Sony   VAIO     20090522 MSFT 00010013)
ACPI: MCFG 0x00000000B5F18C90 00003C (v01 Sony   VAIO     20090522 MSFT 00000097)
ACPI: HPET 0x00000000B5F18C10 000038 (v01 Sony   VAIO     20090522 MSFT 00010013)
ACPI: SLIC 0x00000000B5F14C10 000176 (v01 Sony   VAIO     20090522 Sony 01000000)
ACPI: SSDT 0x00000000B5EDF590 000505 (v01 Sony   VAIO     20090522 INTL 20051117)
ACPI: SSDT 0x00000000B5EC8C10 0002E4 (v01 Sony   VAIO     20090522 INTL 20051117)
ACPI: 3 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz, id 0x1067a
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz, id 0x1067a
cpu1: node 0, package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20221020
acpi0: X/RSDT: OemId <  Sony,    VAIO,20090522>, AslId <MSFT,00010013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE04C82113988 000223 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE04B53C18808 0007A2 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE04B53B0FC08 0000FD (v01 PmRef  ApIst    00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE04B53C55388 000047 (v01 PmRef  ApCst    00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09): io 0x62,0x66
FWHD (INT0800) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SNY9001) (aux port): irq 12
sony0 at acpi0 (SNC, SNY5001): Sony Miscellaneous Controller
ACPI Warning: \_SB.PCI0.LPCB.SNC.GSNE: Insufficient arguments - Caller passed 0, method requires 1 (20221020/nsarguments-277)
ACPI Warning: \_SB.PCI0.LPCB.SNC.GSNE: Insufficient arguments - Caller passed 0, method requires 1 (20221020/nsarguments-277)
ACPI Error: Aborting method \PHS0 due to previous error (AE_AML_LOOP_TIMEOUT) (20221020/psparse-580)
ACPI Error: Aborting method \PHS due to previous error (AE_AML_LOOP_TIMEOUT) (20221020/psparse-580)
ACPI Error: Aborting method \_SB.PCI0.LPCB.SNC.GDDI due to previous error (AE_AML_LOOP_TIMEOUT) (20221020/psparse-580)
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0410): ACPI Display Output Device
acpiout1: brightness levels: [4,16,28,40,52,64,76,88,100]
acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0400: Unknown Output Device, head 0
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpitz0 at acpi0 (TZ00)
acpitz0: levels: critical 127.0 C, passive cooling
acpitz1 at acpi0 (TZ01): cpu0 cpu1
acpitz1: levels: critical 110.0 C, passive 104.0 C, passive cooling
ACPI: Enabled 2 GPEs in block 00 to 3F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: ALPS PS/2 V2 pointing device
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel 82GM45 Host Bridge (rev. 0x07)
agp0 at pchb0: G4X-family chipset
agp0: detected 130556k stolen memory
agp0: aperture at 0xc0000000, size 0x10000000
i915drmkms0 at pci0 dev 2 function 0: Intel 82GM45 Integrated Graphics Device (rev. 0x07)
Intel 82GM45 Integrated Graphics Device (miscellaneous display, revision 0x07) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci2: interrupting at ioapic0 pin 19
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: Intel 82801I USB EHCI Controller (rev. 0x03)
ehci0: 64-bit DMA
ehci0: interrupting at ioapic0 pin 19
ehci0: EHCI version 1.0
ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2
ehci0: Using DMA subregion for control data structures
usb3 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: Realtek ALC262
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack] [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
hdafg1 at hdaudio0: Intel G45 HDMI/2
hdafg1: HDMI00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
audio1 at hdafg1: playback, capture, full duplex, independent
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr1 at audio1: PC Speaker (synthesized)
wsbell at spkr1 not configured
ppb0 at pci0 dev 28 function 0: Intel 82801I PCI Express Port #1 (rev. 0x03)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci1 dev 0 function 0, Yukon-2 Ultra 2 (0x0)
mskc0: interrupting at msi1 vec 0
msk0 at mskc0 port A: Ethernet address [_MAC_XXXXXXXXXX]
makphy0 at msk0 phy 0: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 28 function 1: Intel 82801I PCI Express Port #2 (rev. 0x03)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci2 dev 0 function 0: Intel WiFi Link 5100 (rev. 0x00)
iwn0: interrupting at msi2 vec 0
iwn0: MIMO 1T2R, MoW, address [_MAC_XXXXXXXXXX]
ppb2 at pci0 dev 28 function 2: Intel 82801I PCI Express Port #3 (rev. 0x03)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
uhci3 at pci0 dev 29 function 0: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci3: interrupting at ioapic0 pin 23
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci4: interrupting at ioapic0 pin 19
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: Intel 82801I USB EHCI Controller (rev. 0x03)
ehci1: 64-bit DMA
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
ehci1: 3 companion controllers, 2 ports each: uhci3 uhci4 uhci5
ehci1: Using DMA subregion for control data structures
usb7 at ehci1: USB revision 2.0
ppb3 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x93)
pci4 at ppb3 bus 11
pci4: i/o space, memory space enabled
fwohci0 at pci4 dev 3 function 0: Ricoh 5C832 PCI-SD/MMC/MMC+/MS/xD/Firewire (rev. 0x05)
fwohci0: interrupting at ioapic0 pin 16
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:42:dc
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
fwohci0: Clear PME# now
sdhc0 at pci4 dev 3 function 1: Ricoh 5C822 PCI-CardBus Bridge/MS/SD/MMC/SC (rev. 0x22)
sdhc0: interrupting at ioapic0 pin 17
sdhc0: SDHC 1.0, rev 4, caps <01e021a1/00000000>, SDMA, 33000 kHz, HS 3.3V, 512 byte blocks
sdmmc0 at sdhc0 slot 0
Ricoh 5C592 PCI-CardBus Bridge/MS/SD/Firewire (miscellaneous system, revision 0x12) at pci4 dev 3 function 2 not configured
ichlpcib0 at pci0 dev 31 function 0: Intel 82801IM LPC Interface Bridge (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: Intel 82801I Mobile AHCI SATA Controller with 4 ports (rev. 0x03)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP 0xe720ffc3<EMS,CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi3 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ichsmb0 at pci0 dev 31 function 3: Intel 82801I SMBus Controller (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
spkr2 at pcppi0: PC Speaker
wsbell at spkr2 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat  57 us, pow   100 mW
acpicpu0: P0: FFH, lat  10 us, pow 35000 mW, 2534 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 35000 mW, 2533 MHz
acpicpu0: P2: FFH, lat  10 us, pow 15000 mW, 1600 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
coretemp0 at cpu0: thermal sensor, 1 C resolutioncoretemp0: autoconfiguration error: WARNING: Tjmax(0) might exceeded the limit.
, Tjmax=0
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolutioncoretemp1: autoconfiguration error: WARNING: Tjmax(0) might exceeded the limit.
, Tjmax=0
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
IPsec: Initialized Security Association Processing.
acpiacad0: AC adapter online.
uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
uvideo0 at uhub3 port 2 configuration 1 interface 0: Chicony Electronics Co., Ltd. (0x04f2) product b14e (0xb14e), rev 2.00/41.12, addr 2
video0 at uvideo0: Chicony Electronics Co., Ltd. (0x04f2) product b14e (0xb14e), rev 2.00/41.12, addr 2
wd0 at atabus0 drive 0
wd0: <TOSHIBA MK5055GSX>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA), NCQ (31 tags)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GT20N, 905HN033373, CS07> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
swwdog0: software watchdog initialized
WARNING: 2 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/10.0/modules
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
[drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0
intelfb0 at i915drmkms0
[drm] DRM_I915_DEBUG enabled
[drm] DRM_I915_DEBUG_GEM enabled
intelfb0: framebuffer at 0xc0010000, size 1366x768, depth 32, stride 5504
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ugen0 at uhub1 port 1
ugen0: Sony (0x054c) product 01bb (0x01bb), rev 2.00/1.28, addr 2
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)