Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2024-01-29 01:37:02
From: yamori813
Description: M86XXX
[     7.219981] WARNING: module error: vfs load failed for [   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[     1.000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[     1.000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[     1.000000]     2024
[     1.000000]     The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 10.0_RC3 (M86XXX) #0: Mon Jan 29 09:08:17 JST 2024
[     1.000000]         hiroki@netbsd:/usr/home/hiroki/netbsd-10/sys/arch/evbarm/compile/obj/M86XXX
[     1.000000] total memory = 256 MB
[     1.000000] avail memory = 241 MB
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] mainbus0 (root)
[     1.000000] cpu0 at mainbus0 core 0: 900 MHz Cortex-A9 r2p1 (Cortex V7A core)
[     1.000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
[     1.000000] cpu0: L1 32KB/32B 4-way (256 set) VIPT Instruction cache
[     1.000000] cpu0: L1 32KB/32B 4-way (256 set) write-back-locking-C PIPT Data cache
[     1.000000] cpu0: L2 256KB/32B 8-way (1024 set) write-back-locking-D PIPT Unified cache
[     1.000000] vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
[     1.000000] cpu1 at mainbus0 core 1: 900 MHz Cortex-A9 r2p1 (Cortex V7A core)
[     1.000000] cpu1: DC enabled IC enabled WB enabled LABT branch prediction enabled
[     1.000000] cpu1: L1 32KB/32B 4-way (256 set) VIPT Instruction cache
[     1.000000] cpu1: L1 32KB/32B 4-way (256 set) write-back-locking-C PIPT Data cache
[     1.000000] cpu1: L2 256KB/32B 8-way (1024 set) write-back-locking-D PIPT Unified cache
[     1.000000] vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
[     1.000000] armperiph0 at mainbus0
[     1.000000] arml2cc0 at armperiph0: ARM PL310 r0p0 L2 Cache Controller
[     1.000000] armgic0 at armperiph0: Generic Interrupt Controller, 96 sources (85 valid)
[     1.000000] armgic0: 32 Priorities, 64 SPIs, 5 PPIs, 16 SGIs
[     1.000000] arma9tmr0 at armperiph0: A9 Global 64-bit Timer (225 MHz)
[     1.000000] arma9tmr0: interrupting on irq 27
[     1.000000] axi0 at mainbus0: Advanced eXtensible Interface
[     1.000000] clk0 at axi0 addr 0x904b0000
[     1.000000] com0 at axi0 addr 0x96400000-0x96403fff intr 59: ns16650, no ERS, 16-byte FIFO
[     1.000000] com0: console
[     1.000000] xhci0 at axi0 addr 0x9f000000 intr 54: USB Interface
[     1.000000] xhci0: xHCI version 0.96
[     1.000000] usb0 at xhci0: USB revision 3.0
[     1.000000] usb1 at xhci0: USB revision 2.0
[     1.000000] dwctwo0 at axi0 addr 0x92000000 intr 53: DesignWare USB2 OTG
[     1.000000] m86gpio0 at axi0 addr 0x90470000
[     1.000000] pge0 at axi0 addr 0x9c000000 intr 36: PFE GEMAC Interface
[     1.000000] pge0: ddr_baseaddr: c7700000 ddr_phys_baseaddr: 900000 ddr_size: a80000
[     1.000000] pge0: Ethernet address [_MAC_XXXXXXXXXX]
[     1.000000] SWPHY: 7949 7949 7949 7949 796d
[     1.000000] athsw0 at pge0 phy 0
[     1.000000] athsw0: QCA8337 Ethernet Switch (ver 19 rev 2)
[     1.000000] athsw0: MAC port == RGMII, port 4 = switch port
[     1.000000] dwctwo0: Core Release: 2.81a (snpsid=4f54281a)
[     1.000000] usb2 at dwctwo0: USB revision 2.0
[     1.000000] cfi0 at mainbus0
[     1.000000] cfi0: CFI NOR flash 32 MB x8/x16
[     1.000000] nor0 at cfi0
[     1.000000] nor0: page size: 64, spare size: 0, block size: 128 KB
[     1.000000] nor0: LUN size: 256 blocks, LUNs: 1, total storage size: 32 MB
[     1.000000] flash0 at nor0, size 128 KB, offset 0, read only
[     1.000000] flash0: erase size 128 KB bytes, write size 64 bytes
[     1.000000] flash1 at nor0, size 640 KB, offset 0x20000, read only
[     1.000000] flash1: erase size 128 KB bytes, write size 64 bytes
[     1.000000] flash2 at nor0, size 768 KB, offset 0xa0000, read only
[     1.000000] flash2: erase size 128 KB bytes, write size 64 bytes
[     1.000000] cpu0 has 1 core siblings: cpu0
[     1.000000] cpu0 has 2 pkg siblings: cpu1 cpu0
[     1.000000] cpu0 has 1 1st siblings: cpu0
[     1.000000] cpu0 first in package: cpu0
[     1.000000] cpu1 has 1 core siblings: cpu1
[     1.000000] cpu1 has 2 pkg siblings: cpu0 cpu1
[     1.000000] cpu1 has 1 1st siblings: cpu0
[     1.000000] cpu1 first in package: cpu0
[     1.000000] timecounter: Timecounter "arma9tmr0" frequency 225000000 Hz quality 500
[     1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[     1.000003] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[     1.009995] uhub0: 1 port with 1 removable, self powered
[     1.009995] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[     1.019985] uhub1: 1 port with 1 removable, self powered
[     1.019985] gpio0 at m86gpio0: 64 pins
[     1.019985] WARNING: system needs entropy for security; see entropy(7)
[     1.039987] uhub2 at usb2: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[     1.049981] uhub2: 1 port with 1 removable, self powered
[     1.489981] umass0 at uhub1 port 1 configuration 1 interface 0
[     1.489981] umass0: vendor 05e3 (0x05e3) USB TO IDE (0x0702), rev 2.00/0.33, addr 1
[     1.499982] umass0: using SCSI over Bulk-Only
[     1.499982] scsibus0 at umass0: 2 targets, 1 lun per target
[     1.509986] sd0 at scsibus0 target 0 lun 0: <FUJITSU, MHD2032AT, 0811> disk fixed
[     1.519985] sd0: fabricating a geometry
[     1.529983] sd0: 3102 MB, 3102 cyl, 64 head, 32 sec, 512 bytes/sect x 6354432 sectors
[     1.529983] sd0: fabricating a geometry
[     1.639979] boot device: <unknown>
[     1.652244] root on sd0a dumps on sd0b
[     1.729982] kern.module.path=/stand/evbarm/10.0/modules
[     1.740330] WARNING: no TOD clock present
[     1.740330] WARNING: using filesystem time
[     1.748454] WARNING: CHECK AND RESET THE DATE!
[     1.829981] init: copying out path `/sbin/init' 11
[     4.689981] entropy: best effort
[     9.449988] entropy: ready
[    10.429978] WARNING: module error: vfs load failed for `wsdisplay', error 2
[    10.439980] WARNING: module error: vfs load failed for `wsdisplay', error 2
[    10.449978] WARNING: module error: vfs load failed for `wsdisplay', error 2
[    10.449978] WARNING: module error: vfs load failed for `wsdisplay', error 2
[    11.319980] pge0: pfe_hw_init: start 
[    11.329979] pge0: class init complete
[    11.329979] pge0: tmu init complete
[    11.329979] pge0: bmu1 init: done
[    11.339980] pge0: bmu2 init: done
[    11.339980] pge0: GPI1 init complete
[    11.339980] pge0: GPI2 init complete
[    11.349978] pge0: HGPI init complete
[    11.349978] pge0: HIF init complete
[    11.349978] pge0: bmu1 enabled
[    11.359978] pge0: bmu2 enabled
[    11.359978] pge0: pfe_hw_init: done