Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2024-02-10 07:40:20
From: yamori813
Description: BCM5301X
[   1.0000000] uboot arg = 0, 0, 0, 0x43464531

[   1.0000000] NetBSD/evbarm (bcm53xx) booting ...
[   1.0000000] initarm: Configuring system, CLIDR=1110000003 CTR=0x83338003 PMUSERSR=0
[   1.0000000] [ Kernel symbol table missing! ]
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[   1.0000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[   1.0000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[   1.0000000]     2024
[   1.0000000]     The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 10.0_RC3 (BCM5301X) #74: Sat Feb 10 16:37:04 JST 2024
[   1.0000000]  hiroki@netbsd:/usr/home/hiroki/netbsd-10/sys/arch/evbarm/compile/obj/BCM5301X
[   1.0000000] total memory = 128 MB
[   1.0000000] avail memory = 113 MB
[   1.0000000] mainbus0 (root)
[   1.0000000] cpu0 at mainbus0 core 0: 800 MHz Cortex-A9 r3p0 (Cortex V7A core)
[   1.0000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
[   1.0000000] cpu0: L1 32KB/32B 4-way (256 set) VIPT Instruction cache
[   1.0000000] cpu0: L1 32KB/32B 4-way (256 set) write-back-locking-C PIPT Data cache
[   1.0000000] cpu0: L2 256KB/32B 16-way (512 set) write-back-locking-D PIPT Unified cache
[   1.0000000] cpu0: unrecognized VFP version 0
[   1.0000000] armperiph0 at mainbus0
[   1.0000000] arml2cc0 at armperiph0: ARM PL310 r3p2 L2 Cache Controller
[   1.0000000] armgic0 at armperiph0: Generic Interrupt Controller, 256 sources (245 valid)
[   1.0000000] armgic0: 32 Priorities, 224 SPIs, 5 PPIs, 16 SGIs
[   1.0000000] arma9tmr0 at armperiph0: A9 Global 64-bit Timer (400 MHz)
[   1.0000000] arma9tmr0: interrupting on irq 27
[   1.0000000] bcmcca0 at mainbus0: BCM53010 (Rev A0)
[   1.0000000] bcmcca0: interrupting at irq 117
[   1.0000000] com0 at bcmcca0 channel 0: ns16550a, 16-byte FIFO
[   1.0000000] com0: console
[   1.0000000]  channel 1bcmccb0 at mainbus0
[   1.0000000] bcmmdio0 at bcmccb0: MDIO bus @ 2 MHz
[   1.0000000] bcmrng0 at bcmccb0: Random Number Generator (512 bit FIFO)
[   1.0000000] bcmi2c0 at bcmccb0
[   1.0000000] sdhc0 at bcmccb0: SDHC controller
[   1.0000000] sdhc0: SDHC 3.0, rev 169, PIO, 200000 kHz, HS SDR50 DDR50 SDR104 HS200 1.8V 3.0V 3.3V, re-tuning mode 1 (1s timer), 2048 byte blocks
[   1.0000000] sdmmc0 at sdhc0 slot 0
[   1.0000000] sdhc0: interrupting on irq 177
[   1.0000000] bcmusb0 at bcmccb0
[   1.0000000] ohci0 at bcmusb0: OHCI USB controller
[   1.0000000] ohci0: OHCI version 1.0, legacy support
[   1.0000000] ohci0: init failed, error=22
[   1.0000000] ehci0 at bcmusb0: ECHI USB controller
[   1.0000000] ehci0: 1 companion controller, 2 ports: ohci0
[   1.0000000] ehci0: Using DMA subregion for control data structures
[   1.0000000] ehci0: failed to allocate frame list
[   1.0000000] ehci0: init failed, error=22
[   1.0000000] bcmusb0: interrupting on irq 111
[   1.0000030] WARNING: system needs entropy for security; see entropy(7)
[   1.0099915] WARNING: 3 errors while detecting hardware; check system log.
[   1.0224689] boot device: <unknown>
[   1.0224689] root device: