Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2024-02-11 14:37:51
From: Ken Wellsch
Description: FreeBSD 12.4R/sparc64 on Sunfire V210
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.4-RELEASE r372781 GENERIC sparc64
gcc version 4.2.1 20070831 patched [FreeBSD]
real memory  = 8589934592 (8192 MB)
avail memory = 8395489280 (8006 MB)
cpu0: Sun Microsystems UltraSparc-IIIi Processor (1336.00 MHz CPU)
cpu1: Sun Microsystems UltraSparc-IIIi Processor (1336.00 MHz CPU)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
[ath_hal] loaded
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "openprom" is Giant locked and may be deleted before FreeBSD 14.0.
nexus0: <Open Firmware Nexus device>
pcib0: <Sun Host-PCI bridge> mem 0x4000ff00000-0x4000ff0afff,0x4000fc10000-0x4000fc1701f,0x7f600000000-0x7f6000000ff,0x4000ff80000-0x4000ff8ffff irq 2035,2032,2033,2036,2019 on nexus0
pcib0: Tomatillo, version 4, IGN 0x1f, bus B, PCI mode, 66MHz
pcib0: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries
pci0: <OFW PCI bus> on pcib0
pcib1: <Sun Host-PCI bridge> mem 0x4000f600000-0x4000f60afff,0x4000f410000-0x4000f41701f,0x7fe00000000-0x7fe000000ff,0x4000f780000-0x4000f78ffff irq 1970,1968,1969,1972,1953 on nexus0
pcib1: Tomatillo, version 4, IGN 0x1e, bus A, PCI mode, 33MHz
pcib1: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries
pci1: <OFW PCI bus> on pcib1
pcib2: <Sun Host-PCI bridge> mem 0x4000e600000-0x4000e60afff,0x4000e410000-0x4000e41701f,0x7ce00000000-0x7ce000000ff,0x4000e780000-0x4000e78ffff irq 1842,1840,1841,1844,1827 on nexus0
pcib2: Tomatillo, version 4, IGN 0x1c, bus A, PCI mode, 66MHz
pcib2: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries
pci2: <OFW PCI bus> on pcib2
pcib3: <Sun Host-PCI bridge> mem 0x4000ef00000-0x4000ef0afff,0x4000ec10000-0x4000ec1701f,0x7c600000000-0x7c6000000ff,0x4000ef80000-0x4000ef8ffff irq 1907,1904,1905,1908,1893 on nexus0
pcib3: Tomatillo, version 4, IGN 0x1d, bus B, PCI mode, 66MHz
pcib3: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries
pci3: <OFW PCI bus> on pcib3
nexus0: <memory-controller> mem 0x40000000000-0x40000000007 type memory-controller (no driver attached)
nexus0: <memory-controller> mem 0x40000800000-0x40000800007 type memory-controller (no driver attached)
bge0: <Broadcom BCM5704 A3, ASIC rev. 0x002003> mem 0x200000-0x20ffff,0x110000-0x11ffff at device 2.0 on pci0
bge0: CHIP ID 0x00002003; ASIC REV 0x02; CHIP REV 0x20; PCI on PCI-X 66 MHz; 64bit
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
bge1: <Broadcom BCM5704 A3, ASIC rev. 0x002003> mem 0x400000-0x40ffff,0x120000-0x12ffff at device 2.1 on pci0
bge1: CHIP ID 0x00002003; ASIC REV 0x02; CHIP REV 0x20; PCI on PCI-X 66 MHz; 64bit
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 1000BASE-T media interface> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
isab0: <PCI-ISA bridge> at device 7.0 on pci1
isa0: <ISA bus> on isab0
pci1: <old, non-VGA display device> at device 6.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x1000000-0x1000fff at device 10.0 on pci1
usbus0 on ohci0
atapci0: <AcerLabs M5229 UDMA100 controller> port 0x900-0x907,0x918-0x91b,0x910-0x917,0x908-0x90b,0x920-0x92f at device 13.0 on pci1
atapci0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
sym0: <1010-66> port 0x900-0x9ff mem 0x100000-0x1003ff,0x102000-0x103fff at device 2.0 on pci2
sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: <1010-66> port 0xa00-0xaff mem 0x104000-0x1043ff,0x106000-0x107fff at device 2.1 on pci2
sym1: No NVRAM, ID 7, Fast-80, SE, parity checking
bge2: <Broadcom BCM5704 A3, ASIC rev. 0x002003> mem 0x200000-0x20ffff,0x110000-0x11ffff at device 2.0 on pci3
bge2: CHIP ID 0x00002003; ASIC REV 0x02; CHIP REV 0x20; PCI on PCI-X 66 MHz; 64bit
miibus2: <MII bus> on bge2
brgphy2: <BCM5704 1000BASE-T media interface> PHY 1 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Ethernet address: [_MAC_XXXXXXXXXX]
bge3: <Broadcom BCM5704 A3, ASIC rev. 0x002003> mem 0x400000-0x40ffff,0x120000-0x12ffff at device 2.1 on pci3
bge3: CHIP ID 0x00002003; ASIC REV 0x02; CHIP REV 0x20; PCI on PCI-X 66 MHz; 64bit
miibus3: <MII bus> on bge3
brgphy3: <BCM5704 1000BASE-T media interface> PHY 1 on miibus3
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Ethernet address: [_MAC_XXXXXXXXXX]
cryptosoft0: <software crypto> on nexus0
nexus0: <syscons> type unknown (no driver attached)
rtc0: <Real-Time Clock> at port 0x70-0x71 pnpid PNP0b00 on isa0
rtc0: registered as a time-of-day clock, resolution 1.000000s
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 44 pnpid PNP0501 on isa0uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at port 0x2e8-0x2ef irq 44 pnpid PNP0501 on isa0
Timecounter "tick" frequency 1336000000 Hz quality 10
Timecounter "stick" frequency 12000000 Hz quality 10
Event timer "tick" frequency 1336000000 Hz quality 1000
Timecounters tick every 1.000 msec
SMP: AP CPU #1 Launched!
usbus0: 12Mbps Full Speed USB v1.0
Trying to mount root from cd9660:/dev/iso9660/12_4_RELEASE_SPARC64_CD [ro]...
Root mount waiting for:ugen0.1: <AcerLabs OHCI root HUB> at usbus0
 usbus0uhub0:  CAM<AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0

uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
cd0 at sym1 bus 0 scbus3 target 4 lun 0
cd0: <ZULUSCSI CDROM 2.0> Removable CD-ROM SCSI-2 device
cd0: [_SERIAL_NUMBER_XXXXX]
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: 612MB (313344 2048 byte sectors)
cd1 at sym1 bus 0 scbus3 target 5 lun 0
cd1: <ZULUSCSI CDROM 2.0> Removable CD-ROM SCSI-2 device
cd1: [_SERIAL_NUMBER_XXXXX]
cd1: 10.000MB/s transfers (10.000MHz, offset 15)
cd1: 444MB (227328 2048 byte sectors)
cd2 at sym1 bus 0 scbus3 target 6 lun 0
cd2: <ZULUSCSI CDROM 2.0> Removable CD-ROM SCSI-2 device
cd2: [_SERIAL_NUMBER_XXXXX]
cd2: 10.000MB/s transfers (10.000MHz, offset 15)
cd2: 390MB (199680 2048 byte sectors)
da0 at sym0 bus 0 scbus2 target 0 lun 0
da0: <IBM IC35L073UCDY10-0 S25Q> Fixed Direct Access SCSI-3 device
da0: [_SERIAL_NUMBER_XXXXX]
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
da0: Command Queueing enabled
da0: 70007MB (143374805 512 byte sectors)
GEOM: da0: adding VTOC8 information.
GEOM_PART: integrity check failed (da0, VTOC8)
GEOM: diskid/DISK-E6VLB25D: adding VTOC8 information.
GEOM_PART: integrity check failed (diskid/DISK-E6VLB25D, VTOC8)
mountroot: waiting for device /dev/iso9660/12_4_RELEASE_SPARC64_CD...
Starting file system checks:
Generating host.conf.
eval: cannot create /etc/host.conf: Read-only file system
eval: cannot create /etc/host.conf: Read-only file system
eval: cannot create /etc/host.conf: Read-only file system
Mounting local filesystems:.
mdmfs: tmpfs mount exited with error code 1
cp: /var/log/utx.lastlogin: Read-only file system
chmod: /var/log/utx.lastlogin: No such file or directory
cp: /varandom: unblocking device.
r/log/utx.log: Read-only file system
chmod: /var/log/utx.log: No such file or directory
eval: cannot create /var/run/clean_var: Read-only file system
eval: cannot create /var/spool/lock/clean_var: Read-only file system
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
ldconfig: mkstemp(/var/run/ld-elf.so.hints.n0IWW5): Read-only file system
Building /boot/kernel/linker.hints
kldxref: can't create /boot/lhint.IniaLW: Read-only file system
/etc/rc: WARNING: $hostname is not set -- see rc.conf(5).
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: dd: /entropy: Read-only file system
dd: /boot/entropy: Read-only file system
.
devmatch: Can't read linker hints file.
lo0: link state changed to UP
Starting Network: lo0 bge0 bge1 bge2 bge3.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet[_IP_XXXX] netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        groups: lo
bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
        ether [_MAC_XXXXXXXXXX]
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
bge1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
        ether [_MAC_XXXXXXXXXX]
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
bge2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
        ether [_MAC_XXXXXXXXXX]
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
bge3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
        ether [_MAC_XXXXXXXXXX]
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
Starting devd.
devd: bind: Read-only file system
/etc/rc: WARNING: failed to start devd
add host[_IP_XXXX]: gateway lo0 fib 0: route already in table
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log filesnewsyslog: can't mkstemp logfile /var/log/auth.log.zvgeTos: Read-only file system
.
eval: cannot create /var/run/dmesg.boot: Read-only file system
Updating /var/run/os-release install: /var/run/os-release: Read-only file system
done.
Updating motd: /etc/motd is not writable, update failed.
eval: cannot create /var/run/syslogd.sockets: Read-only file system
Starting syslogd.
syslogd: cannot open pid file: Read-only file system
Feb 11 14:23:58  syslogd: /var/log/messages: No such file or directory
Feb 11 14:23:58  syslogd: /var/log/security: No such file or directory
Feb 11 14:23:58  syslogd: /var/log/auth.log: No such file or directory
Feb 11 14:23:58  syslogd: /var/log/maillog: No such file or directory
Feb 11 14:23:58  syslogd: /var/log/cron: No such file or directory
Feb 11 14:23:58  syslogd: /var/log/debug.log: No such file or directory
Feb 11 14:23:58  syslogd: /var/log/xferlog: No such file or directory
Feb 11 14:23:58  syslogd: /var/log/lpd-errs: No such file or directory
Feb 11 14:23:58  syslogd: /var/log/ppp.log: No such file or directory
protect: option requires an argument -- p
usage: protect [-i] command
       protect [-cdi] -g pgrp | -p pid
Clearing /tmp (X related).
Mounting late filesystems:.
Starting local daemons:
Welcome to FreeBSD!

Please choose the appropriate terminal type for your system.
Common console types are:
   ansi     Standard ANSI terminal
   vt100    VT100 or compatible terminal
   xterm    xterm terminal emulator (or compatible)
   cons25w  cons25w terminal

Console type [vt100]: