Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2024-02-11 14:39:09
From: Ken Wellsch
Description: OpenBSD 7.4R/sparc64 on Sunfire V210
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2023 OpenBSD. All rights reserved.  https://www.OpenBSD.org

OpenBSD 7.4 (RAMDISK) #1800: Tue Oct 10 09:38:46 MDT 2023
    xxx@xxx.xxx:/usr/src/sys/arch/sparc64/compile/RAMDISK
real mem = 8589934592 (8192MB)
avail mem = 8430936064 (8040MB)
random: boothowto does not indicate good seed
mainbus0 at root: Sun Fire V210
"SUNW,UltraSPARC-IIIi" at mainbus0 not configured
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1336 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
"memory-controller" at mainbus0 not configured
"memory-controller" at mainbus0 not configured
schizo0 at mainbus0: "Tomatillo", version 4, ign 7c0, bus B 0 to 0
schizo0: dvma map c0000000-dfffffff
pci0 at schizo0
bge0 at pci0 dev 2 function 0 "Broadcom BCM5704C" rev 0x00, BCM5704 A3 (0x2003): ivec 0x7c8, address xx:xx:xx:xx:xx:xx
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci0 dev 2 function 1 "Broadcom BCM5704C" rev 0x00, BCM5704 A3 (0x2003): ivec 0x7c9, address xx:xx:xx:xx:xx:xx
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
schizo1 at mainbus0: "Tomatillo", version 4, ign 780, bus A 0 to 0
schizo1: dvma map c0000000-dfffffff
pci1 at schizo1
ebus0 at pci1 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"flashprom" at ebus0 addr 0-fffff, 290-290 not configured
rtc0 at ebus0 addr 70-71: m5819p
"i2c" at ebus0 addr 320-321 ivec 0x2e not configured
"power" at ebus0 addr 800-82f ivec 0x20 not configured
com0 at ebus0 addr 3f8-3ff ivec 0x2c: ns16550a, 16 byte fifo
com0: console
com1 at ebus0 addr 2e8-2ef ivec 0x2c: ns16550a, 16 byte fifo
"rmc-comm" at ebus0 addr 3e8-3ef ivec 0x2c not configured
"Acer Labs M7101 Power" rev 0x00 at pci1 dev 6 function 0 not configured
ohci0 at pci1 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x7a7, version 1.0, legacy support
pciide0 at pci1 dev 13 function 0 "Acer Labs M5229 IDE" rev 0xc4: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x798 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
schizo2 at mainbus0: "Tomatillo", version 4, ign 700, bus A 0 to 0
schizo2: dvma map c0000000-dfffffff
pci2 at schizo2
siop0 at pci2 dev 2 function 0 "Symbios Logic 53c1010-66" rev 0x01: ivec 0x729, using 8K of on-board RAM
scsibus0 at siop0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <IBM, IC35L073UCDY10-0, S25Q> naa.5005076718c8583c
sd0: 70007MB, 512 bytes/sector, 143374805 sectors
siop1 at pci2 dev 2 function 1 "Symbios Logic 53c1010-66" rev 0x01: ivec 0x728, using 8K of on-board RAM
scsibus1 at siop1: 16 targets, initiator 7
cd0 at scsibus1 targ 4 lun 0: <ZULUSCSI, CDROM, 2.0> removable serial.ZULUSCSICDROM_B1816376
cd1 at scsibus1 targ 5 lun 0: <ZULUSCSI, CDROM, 2.0> removable serial.ZULUSCSICDROM_B1816376
cd2 at scsibus1 targ 6 lun 0: <ZULUSCSI, CDROM, 2.0> removable serial.ZULUSCSICDROM_B1816376
schizo3 at mainbus0: "Tomatillo", version 4, ign 740, bus B 0 to 0
schizo3: dvma map c0000000-dfffffff
pci3 at schizo3
bge2 at pci3 dev 2 function 0 "Broadcom BCM5704C" rev 0x00, BCM5704 A3 (0x2003): ivec 0x75c, address xx:xx:xx:xx:xx:xx
brgphy2 at bge2 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge3 at pci3 dev 2 function 1 "Broadcom BCM5704C" rev 0x00, BCM5704 A3 (0x2003): ivec 0x75d, address xx:xx:xx:xx:xx:xx
brgphy3 at bge3 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
softraid0 at root
scsibus2 at softraid0: 256 targets
siop0: ppr negotiation for target 0: no DT option
siop0: target 0 now using tagged 16 bit 20.0 MHz 8 REQ/ACK offset xfers
bootpath: /pci@1c,600000/scsi@2,1/disk@6,0:f
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
erase ^?, werase ^W, kill ^U, intr ^C, status ^T

Welcome to the OpenBSD/sparc64 7.4 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?