Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2024-02-19 13:50:53
From: acer
Description: FreeBSD/amd64 on LENOVO INVALID
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-RELEASE-p3 #0: Mon Dec 11 04:56:01 UTC 2023
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152)
VT(efifb): resolution 1366x768
module_register: cannot register pci/re from kernel; already loaded from if_re.ko
Module pci/re failed to register: 17
module_register: cannot register re/miibus from kernel; already loaded from if_re.ko
Module re/miibus failed to register: 17
CPU: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (2594.18-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306a9  Family=0x6  Model=0x3a  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7dbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8050581504 (7677 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-H2   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1 3 2
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0xbae3b000-0xbae3b01e
smbios0: Version: 2.7, BCD Revision: 2.7
aesni0: No AES or SHA support.
acpi0: <LENOVO TP-H2>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x4000-0x407f mem 0xda000000-0xdaffffff,0xd0000000-0xd7ffffff,0xd8000000-0xd9ffffff at device 0.0 on pci1
vgapci1: <VGA-compatible display> port 0x5000-0x503f mem 0xdb000000-0xdb3fffff,0xc0000000-0xcfffffff at device 2.0 on pci0
vgapci1: Boot video device
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xdc600000-0xdc60ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xdc61a000-0xdc61a3ff at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac0: <Intel Panther Point HDA Controller> mem 0xdc610000-0xdc613fff at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
iwn0: <Intel Centrino Wireless-N 2230> mem 0xdc500000-0xdc501fff at device 0.0 on pci3
pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <unknown> at device 0.0 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xdbc04000-0xdbc04fff,0xdbc00000-0xdbc03fff at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xdc619000-0xdc6193ff at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0x5088-0x508f,0x509c-0x509f,0x5080-0x5087,0x5098-0x509b,0x5060-0x507f mem 0xdc618000-0xdc6187ff at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0.
psm0: model Synaptics Touchpad, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC-low" frequency 1297053617 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub0 on usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1 on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa0
pcm1: <Realtek ALC269 (Internal Analog Mic)> at nid 25 on hdaa0
hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
uhub2 on usbus0
uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
ada0: <ST500LT012-9WS142 0001LVM1> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada0: quirks=0x1<4K>
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: ada0,pass0 in 'Slot 01', SATA Slot: scbus0 target 0
ses0: cd0,pass1 in 'Slot 04', SATA Slot: scbus1 target 0
cd0 at ahcich4 bus 0 scbus1 target 0 lun 0
cd0: <PLDS DVD-RW DS8A9SH EL3A> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
uhub2: 8 ports with 8 removable, self powered
ugen0.2: <Logitech G102 LIGHTSYNC Gaming Mouse> at usbus0
ums0 on uhub2
ums0: <Logitech G102 LIGHTSYNC Gaming Mouse, class 0/0, rev 2.00/52.00, addr 1> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=0
ukbd0 on uhub2
ukbd0: <Logitech G102 LIGHTSYNC Gaming Mouse, class 0/0, rev 2.00/52.00, addr 1> on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus0 usbus1 usbus2
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub4 on uhub1
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
Root mount waiting for: usbus0 usbus1 usbus2
usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device Generic USB3.0 Card Reader (0x05e3:0x0749)
usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Generic USB3.0 Card Reader (0x05e3:0x0749)
ugen0.3: <Generic USB3.0 Card Reader> at usbus0
umass0 on uhub2
umass0: <Generic USB3.0 Card Reader, class 0/0, rev 3.20/15.38, addr 2> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x8001
umass0:3:0: Attached to scbus3
uhub4: 6 ports with 6 removable, self powered
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:28,0 (Not ready to ready change, medium may have changed)
(probe0:umass-sim0:0:0:0): Retrying command (per sense data)
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <Generic MassStorageClass 1538> Removable Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 400.000MB/s transfers
da0: 59640MB (122142720 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
uhub3: 8 ports with 8 removable, self powered
ugen1.3: <vendor 0x8087 product 0x07da> at usbus1
da1 at umass-sim0 bus 0 scbus3 target 0 lun 1
da1: <Generic MassStorageClass 1538> Removable Direct Access SPC-4 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXX]
da1: 400.000MB/s transfers
da1: 15360MB (31457280 512 byte sectors)
da1: quirks=0x2<NO_6_BYTE>
ugen1.4: <Vimicro corp. Integrated Camera> at usbus1
Cuse v0.1.37 @ /dev/cuse
drmn1: <drmn> on vgapci1
vgapci1: child drmn1 requested pci_enable_io
vgapci1: child drmn1 requested pci_enable_io
[drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19).
[drm] Got stolen memory base 0xbba00000, size 0x4000000
lkpi_iic0: <LinuxKPI I2C> on drmn1
iicbus0: <Philips I2C bus> on lkpi_iic0
iic0: <I2C generic I/O> on iicbus0
lkpi_iic1: <LinuxKPI I2C> on drmn1
iicbus1: <Philips I2C bus> on lkpi_iic1
iic1: <I2C generic I/O> on iicbus1
lkpi_iic2: <LinuxKPI I2C> on drmn1
iicbus2: <Philips I2C bus> on lkpi_iic2
iic2: <I2C generic I/O> on iicbus2
lkpi_iic3: <LinuxKPI I2C> on drmn1
iicbus3: <Philips I2C bus> on lkpi_iic3
iic3: <I2C generic I/O> on iicbus3
lkpi_iic4: <LinuxKPI I2C> on drmn1
iicbus4: <Philips I2C bus> on lkpi_iic4
iic4: <I2C generic I/O> on iicbus4
lkpi_iic5: <LinuxKPI I2C> on drmn1
iicbus5: <Philips I2C bus> on lkpi_iic5
iic5: <I2C generic I/O> on iicbus5
lkpi_iic6: <LinuxKPI I2C> on drmn1
iicbus6: <Philips I2C bus> on lkpi_iic6
iic6: <I2C generic I/O> on iicbus6
iic6: detached
iicbus6: detached
lkpi_iic6: detached
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
lkpi_iic6: <LinuxKPI I2C> on drm4
iicbus6: <Philips I2C bus> on lkpi_iic6
iic6: <I2C generic I/O> on iicbus6
[drm] Initialized i915 1.6.0 20201103 for drmn1 on minor 0
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=768 width=1366 depth=32
pbase=0xc0000000 vbase=0xfffff800c0000000
name=drmn1 flags=0x0 stride=5504 bpp=32
end FB_INFO
ichsmb0: <Intel Panther Point SMBus controller> port 0xefa0-0xefbf mem 0xdc614000-0xdc6140ff at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
rtsx0: <2.1g Realtek RTS5229 PCIe SD Card Reader> mem 0xdbd00000-0xdbd00fff at device 0.0 on pci4
rtsx0: No card is detected
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.WMI1.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: Embedded MOF found
ACPI: \134_SB.AMW0.WQDD: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: link state changed to DOWN
lo0: link state changed to UP
iwn0: iwn_read_firmware: ucode rev=0x12a80601
iwn0: iwn_read_firmware: ucode rev=0x12a80601
iwn0: iwn_send_rxon: is_scanning set, before RXON
wlan0: link state changed to UP
ubt0 on uhub4
ubt0: <vendor 0x8087 product 0x07da, class 224/1, rev 2.00/78.69, addr 3> on usbus1