Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2024-03-05 04:06:29
From: piyopiyo
Description: Wyse C10LE with USB Ethernet and SDHC R/W
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.2-STABLE #0 stable/13-n254667-bc68c55166ad: Thu Feb 23 02:28:20 UTC 2023
    [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/i386.i386/sys/GENERIC i386
FreeBSD clang version 14.0.5 ( llvmorg-14.0.5-0-gc12386ae247c)
VT(vbefb): resolution 1920x1200
CPU: VIA Eden Processor 1000MHz (1000.12-MHz 686-class CPU)
  Origin="CentaurHauls"  Id=0x6d0  Family=0x6  Model=0xd  Stepping=0
  AMD Features=0x100000<NX>
  VIA Padlock Features=0xffcc<RNG,AES,AES-CTR,SHA1,SHA256,RSA>
real memory  = 2147483648 (2048 MB)
avail memory = 2013790208 (1920 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <PTLTD          APIC  >
random: registering fast source VIA Nehemiah Padlock RNG
random: fast provider: "VIA Nehemiah Padlock RNG"
random: unblocking device.
ioapic0 <Version 0.3> irqs 0-23
random: entropy device external interface
kbd1 at kbdmux0
smbios0: <System Management BIOS> at iomem 0xf6730-0xf674e
smbios0: Version: 2.6
aesni0: No AES or SHA support.
acpi0: <PTLTD    XSDT>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x75 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: 7ff80000 vs 7fe80000
pci0: <ACPI PCI bus> on pcib0
device_attach: ioapic0 attach returned 6
vgapci0: <VGA-compatible display> mem 0xf8000000-0xfbffffff,0xfc000000-0xfcffffff irq 16 at device 1.0 on pci0
vgapci0: Boot video device
atapci0: <VIA VX855 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4460-0x446f at device 15.0 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x4400-0x441f irq 20 at device 16.0 on pci0
usbus0 on uhci0
uhci1: <VIA 83C572 USB controller> port 0x4420-0x443f irq 22 at device 16.1 on pci0
usbus1 on uhci1
uhci2: <VIA 83C572 USB controller> port 0x4440-0x445f irq 21 at device 16.2 on pci0
usbus2 on uhci2
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfd304000-0xfd3040ff irq 23 at device 16.4 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vge0: <VIA Networking Velocity Gigabit Ethernet> port 0x5000-0x50ff mem 0xfd000000-0xfd0000ff irq 16 at device 3.0 on pci1
miibus0: <MII bus> on vge0
ciphy0: <Cicada CS8201 10/100/1000TX PHY> PHY 1 on miibus0
ciphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
vge0: Ethernet address: xx:xx:xx:xx:xx:xx
hdac0: <VIA VT8251/8237A HDA Controller> mem 0xfd300000-0xfd303fff irq 17 at device 20.0 on pci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xcc800-0xcdfff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
ppc0: parallel port not found.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC" frequency 1000036407 Hz quality 800
Timecounters tick every 1.000 msec
[nl_generic] genl_register_family: Registered family nlctrl id 16
[nl_generic] genl_register_cmds: Adding cmd GETFAMILY(3) to family nlctrl
WARNING: Adding ifaddrs to all fibs has been turned off by default. Consider tuning net.add_addr_allfibs if needed
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
hdacc0: <VIA VT1702_1 HDA CODEC> at cad 0 on hdac0
hdaa0: <VIA VT1702_1 Audio Function Group> at nid 1 on hdacc0
hdaa0: No presence detection support at nid 23
pcm0: <VIA VT1702_1 (Analog 2.0+HP/4ch)> at nid 22,23 and 20,24 on hdaa0
ugen0.1: <VIA UHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <VIA UHCI root HUB> at usbus1
uhub1 on usbus1
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen3.1: <VIA EHCI root HUB> at usbus3
uhub2 on usbus3
uhub2: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <VIA UHCI root HUB> at usbus2
uhub3 on usbus2
uhub3: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
Trying to mount root from ufs:/dev/ada0a [rw]...
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <TS8GCF133 20110407> CFA-7 device
ada0: 66.700MB/s transfers (UDMA4, PIO 512bytes)
ada0: 7647MB (15662304 512 byte sectors)
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3
Root mount waiting for: usbus3
uhub2: 6 ports with 6 removable, self powered
Root mount waiting for: usbus3
ugen1.2: <Elecom Co., Ltd LD-USBL/TX> at usbus1
Root mount waiting for: usbus3
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Generic Mass Storage Device (0x14cd:0x1212)
usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Generic Mass Storage Device (0x14cd:0x1212)
usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Generic Mass Storage Device (0x14cd:0x1212)
ugen3.2: <Generic Mass Storage Device> at usbus3
umass0 on uhub2
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus3
umass0:  SCSI over Bulk-Only; quirks = 0xc100
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Mass Storage Device 1.00> Removable Direct Access SCSI device
da0: 40.000MB/s transfers
da0: 118944MB (243597312 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
lo0: link state changed to UP
vge0: link state changed to DOWN
vge0: link state changed to UP
aue0 on uhub1
aue0: <Elecom Co., Ltd LD-USBL/TX, rev 1.10/1.01, addr 2> on usbus1
miibus1: <MII bus> on aue0
acphy0: <ACXXX 10/100 media interface> PHY 1 on miibus1
acphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on aue0
ue0: Ethernet address: xx:xx:xx:xx:xx:xx