Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2024-03-06 07:52:30
From: yamori813
Description: M86XXX 10.0_RC5
[ 92.409979] turning off swap on /dev/sd0b...[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.0_RC5 (M86XXX) #0: Wed Mar 6 16:46:31 JST 2024 [ 1.000000] hiroki@netbsd:/usr/home/hiroki/netbsd-10/sys/arch/evbarm/compile/obj/M86XXX [ 1.000000] total memory = 256 MB [ 1.000000] avail memory = 241 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] mainbus0 (root) [ 1.000000] cpu0 at mainbus0 core 0: 900 MHz Cortex-A9 r2p1 (Cortex V7A core) [ 1.000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.000000] cpu0: L1 32KB/32B 4-way (256 set) VIPT Instruction cache [ 1.000000] cpu0: L1 32KB/32B 4-way (256 set) write-back-locking-C PIPT Data cache [ 1.000000] cpu0: L2 256KB/32B 8-way (1024 set) write-back-locking-D PIPT Unified cache [ 1.000000] vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals [ 1.000000] cpu1 at mainbus0 core 1: 900 MHz Cortex-A9 r2p1 (Cortex V7A core) [ 1.000000] cpu1: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.000000] cpu1: L1 32KB/32B 4-way (256 set) VIPT Instruction cache [ 1.000000] cpu1: L1 32KB/32B 4-way (256 set) write-back-locking-C PIPT Data cache [ 1.000000] cpu1: L2 256KB/32B 8-way (1024 set) write-back-locking-D PIPT Unified cache [ 1.000000] vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals [ 1.000000] armperiph0 at mainbus0 [ 1.000000] arml2cc0 at armperiph0: ARM PL310 r0p0 L2 Cache Controller [ 1.000000] armgic0 at armperiph0: Generic Interrupt Controller, 96 sources (85 valid) [ 1.000000] armgic0: 32 Priorities, 64 SPIs, 5 PPIs, 16 SGIs [ 1.000000] arma9tmr0 at armperiph0: A9 Global 64-bit Timer (225 MHz) [ 1.000000] arma9tmr0: interrupting on irq 27 [ 1.000000] axi0 at mainbus0: Advanced eXtensible Interface [ 1.000000] clk0 at axi0 addr 0x904b0000 [ 1.000000] com0 at axi0 addr 0x96400000-0x96403fff intr 59: ns16650, no ERS, 16-byte FIFO [ 1.000000] com0: console [ 1.000000] xhci0 at axi0 addr 0x9f000000 intr 54: USB Interface [ 1.000000] xhci0: xHCI version 0.96 [ 1.000000] usb0 at xhci0: USB revision 3.0 [ 1.000000] usb1 at xhci0: USB revision 2.0 [ 1.000000] dwctwo0 at axi0 addr 0x92000000 intr 53: DesignWare USB2 OTG [ 1.000000] m86gpio0 at axi0 addr 0x90470000 [ 1.000000] pge0 at axi0 addr 0x9c000000 intr 36: PFE GEMAC Interface [ 1.000000] pge0: ddr_baseaddr: c7700000 ddr_phys_baseaddr: 900000 ddr_size: a80000 [ 1.000000] pge0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] SWPHY: 7949 7949 7949 7949 7949 [ 1.000000] athsw0 at pge0 phy 0 [ 1.000000] athsw0: QCA8337 Ethernet Switch (ver 19 rev 2) [ 1.000000] athsw0: MAC port == RGMII, port 4 = switch port [ 1.000000] dwctwo0: Core Release: 2.81a (snpsid=4f54281a) [ 1.000000] usb2 at dwctwo0: USB revision 2.0 [ 1.000000] cfi0 at mainbus0 [ 1.000000] cfi0: CFI NOR flash 32 MB x8/x16 [ 1.000000] nor0 at cfi0 [ 1.000000] nor0: page size: 64, spare size: 0, block size: 128 KB [ 1.000000] nor0: LUN size: 256 blocks, LUNs: 1, total storage size: 32 MB [ 1.000000] flash0 at nor0, size 128 KB, offset 0, read only [ 1.000000] flash0: erase size 128 KB bytes, write size 64 bytes [ 1.000000] flash1 at nor0, size 640 KB, offset 0x20000, read only [ 1.000000] flash1: erase size 128 KB bytes, write size 64 bytes [ 1.000000] flash2 at nor0, size 768 KB, offset 0xa0000, read only [ 1.000000] flash2: erase size 128 KB bytes, write size 64 bytes [ 1.000000] cpu0 has 1 core siblings: cpu0 [ 1.000000] cpu0 has 2 pkg siblings: cpu1 cpu0 [ 1.000000] cpu0 has 1 1st siblings: cpu0 [ 1.000000] cpu0 first in package: cpu0 [ 1.000000] cpu1 has 1 core siblings: cpu1 [ 1.000000] cpu1 has 2 pkg siblings: cpu0 cpu1 [ 1.000000] cpu1 has 1 1st siblings: cpu0 [ 1.000000] cpu1 first in package: cpu0 [ 1.000000] timecounter: Timecounter "arma9tmr0" frequency 225000000 Hz quality 500 [ 1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.000003] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [ 1.009997] uhub0: 1 port with 1 removable, self powered [ 1.009997] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [ 1.019985] uhub1: 1 port with 1 removable, self powered [ 1.019985] gpio0 at m86gpio0: 64 pins [ 1.019985] WARNING: system needs entropy for security; see entropy(7) [ 1.039989] uhub2 at usb2: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.049984] uhub2: 1 port with 1 removable, self powered [ 1.499982] umass0 at uhub1 port 1 configuration 1 interface 0 [ 1.499982] umass0: vendor 05e3 (0x05e3) USB TO IDE (0x0702), rev 2.00/0.33, addr 1 [ 1.509987] umass0: using SCSI over Bulk-Only [ 1.509987] scsibus0 at umass0: 2 targets, 1 lun per target [ 1.529987] sd0 at scsibus0 target 0 lun 0: <ST940110, A, 0811> disk fixed [ 1.529987] sd0: fabricating a geometry [ 1.539986] sd0: 38154 MB, 38154 cyl, 64 head, 32 sec, 512 bytes/sect x 78140160 sectors [ 1.549985] sd0: fabricating a geometry [ 2.089982] boot device: <unknown> [ 2.100810] root on sd0a dumps on sd0b [ 2.149990] kern.module.path=/stand/evbarm/10.0/modules [ 2.161603] WARNING: no TOD clock present [ 2.161603] WARNING: using filesystem time [ 2.169728] WARNING: CHECK AND RESET THE DATE! [ 2.219987] init: copying out path `/sbin/init' 11 [ 3.709988] entropy: best effort [ 5.499982] entropy: ready [ 5.709991] WARNING: module error: vfs load failed for `wsdisplay', error 2 [ 5.709991] WARNING: module error: vfs load failed for `wsdisplay', error 2 [ 5.721266] WARNING: module error: vfs load failed for `wsdisplay', error 2 [ 5.731933] WARNING: module error: vfs load failed for `wsdisplay', error 2 [ 6.509985] pge0: pfe_hw_init: start [ 6.509985] pge0: class init complete [ 6.519981] pge0: tmu init complete [ 6.519981] pge0: bmu1 init: done [ 6.519981] pge0: bmu2 init: done [ 6.529981] pge0: GPI1 init complete [ 6.529981] pge0: GPI2 init complete [ 6.529981] pge0: HGPI init complete [ 6.539981] pge0: HIF init complete [ 6.539981] pge0: bmu1 enabled [ 6.539981] pge0: bmu2 enabled [ 6.549980] pge0: pfe_hw_init: done