Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2024-03-11 19:54:30
From: johnny-mnemonic
Description: OpenBSD/sgi 7.5 on SGI R10000 Indigo2 with octeon fs, see github.com/the-machine-hall/openbsd-src/releases/tag/openbsd.75.sgi
>> printenv
SystemPartition=bootp()
OSLoadPartition=bootp()
AutoLoad=No
TimeZone=PST8PDT
console=d1
diskless=1
dbaud=9600
volume=80
sgilogo=y
autopower=y
eaddr=xx:xx:xx:xx:xx:xx
boottune=1
ConsoleOut=serial(0)
ConsoleIn=serial(0)
cpufreq=194
>> boot
Setting $netaddr to[_IP_XXXXXXX] (from server )
Obtaining /sash from server
4114208+876336 entry: 0xa800000020020000
ARCS64 Firmware
Found SGI-IP28, setting up.
Initial setup done, switching console.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2024 OpenBSD. All rights reserved.  https://www.OpenBSD.org

OpenBSD 7.5 (GENERIC-IP28) #1: Mon Mar 11 10:06:11 CET 2024
    [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/sys/arch/sgi/compile/GENERIC-IP28
real mem = 268435456 (256MB)
rsvd mem = 1064960 (2MB)
avail mem = 259670016 (247MB)
warning: no entropy supplied by boot loader
random: boothowto does not indicate good seed
mainbus0 at root: POWER Indigo2 R10000
cpu0 at mainbus0: MIPS R10000 CPU rev 2.5 194 MHz, R10000 FPU rev 0.0
cpu0: cache L1-I 32KB D 32KB 2 way, L2 1024KB 2 way
int0 at mainbus0 addr 0x1fbd9000
imc0 at mainbus0: revision 5
gio0 at imc0
hpc0 at gio0 addr 0x1fb80000: SGI HPC3 (onboard)
zs0 at hpc0 offset 0x00059830 irq 29: 85230
zstty0 at zs0 channel 1: console
zstty1 at zs0 channel 0
pckbc0 at hpc0 offset 0x00059840 irq 28
sq0 at hpc0 offset 0x00054000 irq 3: Seeq 80c03, address xx:xx:xx:xx:xx:xx
wdsc0 at hpc0 offset 0x00044000 irq 1: WD33C93B, 20.0 MHz, burst DMA
wdsc0: microcode revision 0x0d, fast SCSI
scsibus0 at wdsc0: 8 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <IBM, DCAS-32160, S65A> xxxxxx.xxxxxxxxxxxxxxxxxxxxxxxx
sd0: 2063MB, 512 bytes/sector, 4226725 sectors
wdsc1 at hpc0 offset 0x0004c000 irq 2: WD33C93B, 20.0 MHz, burst DMA
wdsc1: microcode revision 0x0d, fast SCSI
scsibus1 at wdsc1: 8 targets, initiator 0
haltwo at hpc0 offset 0x00058000 irq 12 not configured
pione at hpc0 offset 0x00059800 irq 5 not configured
panel0 at hpc0 offset 0x00059850 irq 9: power button
dsclock0 at hpc0 offset 0x00060000
eisa0 at imc0 irq 27
clock0 at mainbus0: int 5
/dev/ksyms: Symbol table not valid.
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
boot device: sq0
nfs_boot: using interface sq0, with revarp & bootparams
nfs_boot: client_addr=172.16.2.143
nfs_boot: server_addr=172.16.0.1 hostname=indigo2
arpresolve: unresolved and rt_expire == 0
arpresolve: unresolved and rt_expire == 0
root on[_IP_XXXXX]:/srv/nfs/indigo2/root
swap on[_IP_XXXXX]:/srv/nfs/indigo2/swap
Automatic boot in progress: starting file system checks.
pf enabled
starting network

starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
swapctl: adding[_IP_XXXXX]:/srv/nfs/openbsd/snapshots/1710000002/octeon/hosts/indy/swap as swap device at priority 0
kvm_mkdb: can't open /dev/ksyms
savecore: /bsd: kvm_read: version misread
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
starting local daemons: cron.
Mon Mar 11 10:57:42 CET 2024

OpenBSD/sgi (indigo2.machine-hall.org) (console)

login: root
Last login: Mon Mar 11 09:46:03 on console
OpenBSD 7.5 (GENERIC-IP28) #1: Mon Mar 11 10:06:11 CET 2024

Welcome to OpenBSD: The proactively secure Unix-like operating system.

Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code.  With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.

You have mail.
indigo2# machine
octeon
indigo2# sysctl hw
hw.machine=sgi
hw.model=IP28
hw.ncpu=1
hw.byteorder=4321
hw.pagesize=16384
hw.disknames=sd0:b3223a9dfc800376
hw.diskcount=1
hw.cpuspeed=194
hw.vendor=SGI
hw.product=POWER Indigo2 R10000
hw.physmem=268435456
hw.usermem=268402688
hw.ncpufound=1
hw.allowpowerdown=1
hw.ncpuonline=1
hw.power=1
hw.ucomnames=
indigo2#