Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-03-19 14:50:12
From: MathCuei
Description: OpenBSD/amd64 on Macmini2,1
OpenBSD 7.4 (GENERIC.MP) #3: Wed Feb 28 06:23:33 MST 2024 [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 2097958912 (2000MB) avail mem = 2014720000 (1921MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0000 (37 entries) bios0: vendor Apple Inc. version "MM21.88Z.009A.B00.0706281359" date 06/28/07 bios0: Apple Inc. Macmini2,1 acpi0 at bios0: ACPI 3.0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG ASF! SBST ECDT SSDT SSDT SSDT acpi0: wakeup devices PXS1(S4) PXS2(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB7(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz, 1833.34 MHz, 06-0f-02, patch 0000005c cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 2MB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 166MHz cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz, 1833.37 MHz, 06-0f-02, patch 0000005c cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 2MB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped acpimcfg0 at acpi0 acpimcfg0: addr 0xe0000000, bus 0-255 acpiec0 at acpi0 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (RP01) acpiprt2 at acpi0: bus 2 (RP02) acpiprt3 at acpi0: bus 3 (PCIB) acpibtn0 at acpi0: PWRB acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000memory map conflict 0xe00f8000/0x1000 memory map conflict 0xfed1c000/0x4000 memory map conflict 0xfffb0000/0x30000 asmc0 at acpi0: SMC_ (smc-napa) addr 0x300/0x20: rev 1.19f519, 137 keys acpicmos0 at acpi0 acpicpu0 at acpi0: !C2(500@1 mwait@0x10), C1(1000@1 mwait), PSS acpicpu1 at acpi0: !C2(500@1 mwait@0x10), C1(1000@1 mwait), PSS acpivideo0 at acpi0: GFX0 cpu0: Enhanced SpeedStep 1833 MHz: speeds: 1833, 1667, 1500, 1333, 1000 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03 inteldrm0 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03 drm0 at inteldrm0 intagp0 at inteldrm0 agp0 at intagp0: aperture at 0x80000000, size 0x10000000 inteldrm0: apic 1 int 16, I945GM, gen 3 vendor "Intel", unknown product 0x27a3 (class DASP subclass Time and Frequency, rev 0x03) at pci0 dev 7 function 0 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi azalia0: codecs: Sigmatel STAC9220/1 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi pci1 at ppb0 bus 1 mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x22, Yukon-2 EC rev. A3 (0x2): apic 1 int 16 msk0 at mskc0 port A: address [_MAC_XXXXXXXXXX] eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi pci2 at ppb1 bus 2 ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 1 int 17 ath0: AR5424 10.3 phy 6.1 rf 10.2 eeprom 5.3, WOR5_ETSIC, address [_MAC_XXXXXXXXXX] uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 21 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 21 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci3 at ppb2 bus 3 "AT&T/Lucent FW322 1394" rev 0x61 at pci3 dev 3 function 0 not configured pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02 pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <MATSHITA, CD-RW CW-8124, DACK> removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 1 int 19 for native-PCI interrupt wd0 at pciide1 channel 0 drive 1: <WDC WD10SPZX-08Z10> wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors wd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL6 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: unknown uhidev0 at uhub3 port 1 configuration 1 interface 0 "SEM USB Keyboard" rev 1.10/1.10 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd0 at ukbd0: console keyboard uhidev1 at uhub3 port 1 configuration 1 interface 1 "SEM USB Keyboard" rev 1.10/1.10 addr 2 uhidev1: iclass 3/0, 2 report ids ucc0 at uhidev1 reportid 1: 573 usages, 20 keys, array wskbd1 at ucc0 mux 1 uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 uhidev2 at uhub3 port 2 configuration 1 interface 0 "YSPRINGTECH USB OPTICAL MOUSE" rev 2.00/0.00 addr 3 uhidev2: iclass 3/1 ums0 at uhidev2: 3 buttons, Z dir wsmouse0 at ums0 mux 0 uhidev3 at uhub4 port 1 configuration 1 interface 0 "Apple Computer HID-proxy" rev 2.00/19.65 addr 2 uhidev3: iclass 3/1 ukbd1 at uhidev3: 8 variable keys, 6 key codes wskbd2 at ukbd1 mux 1 uhidev4 at uhub4 port 1 configuration 1 interface 1 "Apple Computer HID-proxy" rev 2.00/19.65 addr 2 uhidev4: iclass 3/1 ums1 at uhidev4: 5 buttons wsmouse1 at ums1 mux 0 uhidev5 at uhub4 port 2 configuration 1 interface 0 "Apple Computer, Inc. IR Receiver" rev 2.00/1.10 addr 3 uhidev5: iclass 3/0, 38 report ids uhid1 at uhidev5 reportid 36: input=4, output=0, feature=0 uhid2 at uhidev5 reportid 37: input=4, output=0, feature=0 uhid3 at uhidev5 reportid 38: input=4, output=0, feature=0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on wd0a (779426df63e44dd1.a) swap on wd0b dump on wd0b inteldrm0: 1024x768, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wskbd2: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation)