Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2024-03-23 22:46:22
From: rxg
Description: 10.0_RC6 firefly-rk3399
booting netbsd - starting in 0 seconds.
7582752+3367856+4178656+1742704 [595974+949128+708870]=0x13cc9f8
[   1.0000000] NetBSD/evbarm (fdt) booting ...
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[   1.0000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[   1.0000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[   1.0000000]     2024
[   1.0000000]     The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 10.0_RC6 (GENERIC64) #0: Tue Mar 12 10:19:02 UTC 2024
[   1.0000000]  [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC64
[   1.0000000] total memory = 2027 MB
[   1.0000000] avail memory = 1953 MB
[   1.0000000] armfdt0 (root)
[   1.0000000] simplebus0 at armfdt0: Firefly-RK3399 Board
[   1.0000000] cpus0 at simplebus0
[   1.0000000] psci0 at simplebus0: PSCI 1.0
[   1.0000000] simplebus1 at simplebus0
[   1.0000000] cpu0 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x0
[   1.0000000] cpu0: package 0, core 0, smt 0
[   1.0000000] cpufreqdt0 at cpu0
[   1.0000000] cpu1 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x1
[   1.0000000] cpu1: package 0, core 1, smt 0
[   1.0000000] cpufreqdt1 at cpu1
[   1.0000000] cpu2 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x2
[   1.0000000] cpu2: package 0, core 2, smt 0
[   1.0000000] cpufreqdt2 at cpu2
[   1.0000000] cpu3 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x3
[   1.0000000] cpu3: package 0, core 3, smt 0
[   1.0000000] cpufreqdt3 at cpu3
[   1.0000000] cpu4 at cpus0: Arm Cortex-A72 r0p2 (v8-A), id 0x100
[   1.0000000] cpu4: package 1, core 0, smt 0
[   1.0000000] cpufreqdt4 at cpu4
[   1.0000000] cpu5 at cpus0: Arm Cortex-A72 r0p2 (v8-A), id 0x101
[   1.0000000] cpu5: package 1, core 1, smt 0
[   1.0000000] cpufreqdt5 at cpu5
[   1.0000000] gicvthree0 at simplebus0: GICv3
[   1.0000000] gicvthree0: ITS [#0] Devices table @ 0x4751000/0x80000, Non-cacheable, Non-shareable
[   1.0000000] syscon0 at simplebus0: System Controller Registers
[   1.0000000] syscon1 at simplebus0: System Controller Registers
[   1.0000000] fclock0 at simplebus0: 125000000 Hz fixed clock (clkin_gmac)
[   1.0000000] syscon2 at simplebus0: System Controller Registers
[   1.0000000] syscon3 at simplebus0: System Controller Registers
[   1.0000000] syscon4 at simplebus0: System Controller Registers
[   1.0000000] syscon5 at simplebus0: System Controller Registers
[   1.0000000] syscon6 at simplebus0: System Controller Registers
[   1.0000000] syscon7 at simplebus0: System Controller Registers
[   1.0000000] syscon8 at simplebus0: System Controller Registers
[   1.0000000] syscon9 at simplebus0: System Controller Registers
[   1.0000000] syscon10 at simplebus0: System Controller Registers
[   1.0000000] syscon11 at simplebus0: System Controller Registers
[   1.0000000] syscon12 at simplebus0: System Controller Registers
[   1.0000000] syscon13 at simplebus0: System Controller Registers
[   1.0000000] syscon14 at simplebus0: System Controller Registers
[   1.0000000] syscon15 at simplebus0: System Controller Registers
[   1.0000000] syscon16 at simplebus0: System Controller Registers
[   1.0000000] syscon17 at simplebus0: System Controller Registers
[   1.0000000] syscon18 at simplebus0: System Controller Registers
[   1.0000000] syscon19 at simplebus0: System Controller Registers
[   1.0000000] syscon20 at simplebus0: System Controller Registers
[   1.0000000] syscon21 at simplebus0: System Controller Registers
[   1.0000000] syscon22 at simplebus0: System Controller Registers
[   1.0000000] syscon23 at simplebus0: System Controller Registers
[   1.0000000] fclock1 at simplebus0: 24000000 Hz fixed clock (xin24m)
[   1.0000000] syscon24 at simplebus0: System Controller Registers
[   1.0000000] syscon25 at simplebus0: System Controller Registers
[   1.0000000] syscon26 at simplebus0: System Controller Registers
[   1.0000000] syscon27 at simplebus0: System Controller Registers
[   1.0000000] rkcru0 at simplebus0: RK3399 CRU
[   1.0000000] rkcru1 at simplebus0: RK3399 PMU CRU
[   1.0000000] gtmr0 at simplebus0: Generic Timer
[   1.0000000] gtmr0: interrupting on GICv3 irq 27
[   1.0000000] armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual)
[   1.0000040] rkiomux0 at simplebus0: RK3399 IOMUX control
[   1.0000040] rkgpio0 at rkiomux0: GPIO (gpio0@ff720000)
[   1.0000040] gpio0 at rkgpio0: 32 pins
[   1.0000040] rkgpio1 at rkiomux0: GPIO (gpio1@ff730000)
[   1.0000040] gpio1 at rkgpio1: 32 pins
[   1.0000040] rkgpio2 at rkiomux0: GPIO (gpio2@ff780000)
[   1.0000040] gpio2 at rkgpio2: 32 pins
[   1.0000040] rkgpio3 at rkiomux0: GPIO (gpio3@ff788000)
[   1.0000040] gpio3 at rkgpio3: 32 pins
[   1.0000040] rkgpio4 at rkiomux0: GPIO (gpio4@ff790000)
[   1.0000040] gpio4 at rkgpio4: 32 pins
[   1.0000040] rkpwm0 at simplebus0: PWM
[   1.0000040] rkpwm1 at simplebus0: PWM
[   1.0000040] rkiic0 at simplebus0: Rockchip I2C (400000 Hz)
[   1.0000040] iic0 at rkiic0: I2C bus
[   1.0000040] rkpmic0 at iic0 addr 0x1b: RK808 Power Management and Real Time Clock IC
[   1.0000040] rkreg0 at rkpmic0: vdd_center
[   1.0000040] rkreg1 at rkpmic0: vdd_cpu_l
[   1.0000040] rkreg2 at rkpmic0: vcc_ddr
[   1.0000040] rkreg3 at rkpmic0: vcc_1v8
[   1.0000040] rkreg4 at rkpmic0: vcc1v8_dvp
[   1.0000040] rkreg5 at rkpmic0: vcc2v8_dvp
[   1.0000040] rkreg6 at rkpmic0: vcc1v8_pmu
[   1.0000040] rkreg7 at rkpmic0: vcc_sdio
[   1.0000040] rkreg8 at rkpmic0: vcca3v0_codec
[   1.0000040] rkreg9 at rkpmic0: vcc_1v5
[   1.0000040] rkreg10 at rkpmic0: vcca1v8_codec
[   1.0000040] rkreg11 at rkpmic0: vcc_3v0
[   1.0000040] rkreg12 at rkpmic0: vcc3v3_s3
[   1.0000040] rkreg13 at rkpmic0: vcc3v3_s0
[   1.0000040] fan53555reg0 at iic0 addr 0x40: Silergy SYR82X
[   1.0000040] fan53555reg1 at iic0 addr 0x41: Silergy SYR82X
[   1.0000040] fregulator0 at simplebus0: vcc1v8_s3
[   1.0000040] fregulator1 at simplebus0: vcc_sys
[   1.0000040] fregulator2 at simplebus0: vcc3v3_sys
[   1.0000040] fregulator3 at simplebus0: vcc5v0_typec
[   1.0000040] fregulator4 at simplebus0: vcc5v0_host
[   1.0000040] rkiic1 at simplebus0: Rockchip I2C (100000 Hz)
[   1.0000040] iic1 at rkiic1: I2C bus
[   1.0000040] typec-portc (fcs,fusb302) at iic1 addr 0x22 not configured
[   1.0000040] accelerometer (invensense,mpu6500) at iic1 addr 0x68 not configured
[   1.0000040] rkiic2 at simplebus0: Rockchip I2C (100000 Hz)
[   1.0000040] iic2 at rkiic2: I2C bus
[   1.0000040] rkiic3 at simplebus0: Rockchip I2C (100000 Hz)
[   1.0000040] iic3 at rkiic3: I2C bus
[   1.0000040] rt5640 (realtek,rt5640) at iic3 addr 0x1c not configured
[   1.0000040] fregulator5 at simplebus0: dc_12v
[   1.0000040] com0 at simplebus0: DesignWare APB UART, 64-byte FIFO
[   1.0000040] com0: interrupting on GICv3 irq 131
[   1.0000040] com1 at simplebus0: DesignWare APB UART, 64-byte FIFO
[   1.0000040] com1: console
[   1.0000040] com1: interrupting on GICv3 irq 132
[   1.0000040] fregulator6 at simplebus0: vcc3v3_pcie
[   1.0000040] pregulator0 at simplebus0: vdd_log
[   1.0000040] mmcpwrseq0 at simplebus0: Simple MMC power sequence provider
[   1.0000040] rkdrm0 at simplebus0
[   1.0000040] rkpciephy0 at syscon0: RK3399 PCIe PHY
[   1.0000040] rkusb0 at syscon0: USB2 PHY
[   1.0000040] rkusbphy0 at rkusb0: USB2 host port
[   1.0000040] rkusbphy1 at rkusb0: USB2 OTG port
[   1.0000040] rkusb1 at syscon0: USB2 PHY
[   1.0000040] rkusbphy2 at rkusb1: USB2 host port
[   1.0000040] rkusbphy3 at rkusb1: USB2 OTG port
[   1.0000040] /opp-table0 at simplebus0 not configured
[   1.0000040] /opp-table1 at simplebus0 not configured
[   1.0000040] rkvop0 at simplebus0: RK3399 VOPL
[   1.0000040] rkvop0: interrupting on GICv3 irq 151
[   1.0000040] rkvop1 at simplebus0: RK3399 VOPB
[   1.0000040] rkvop1: interrupting on GICv3 irq 150
[   1.0000040] rkpcie0 at simplebus0: RK3399 PCIe
[   1.0000040] rkpciephy0: PHY PLL lock timeout
[   1.0000040] rkpciephy0: PHY PLL lock timeout
[   1.0000040] rkpciephy0: PHY PLL lock timeout
[   1.0000040] rkpciephy0: PHY PLL lock timeout
[   1.0000040] rkpcie0: link training timeout (link_st 0)
[   1.0000040] /power-management@ff310000/power-controller at syscon1 not configured
[   1.0000040] rkemmcphy0 at syscon0: eMMC PHY
[   1.0000040] /phy@ff7c0000 at simplebus0 not configured
[   1.0000040] /phy@ff800000 at simplebus0 not configured
[   1.0000040] /dma-controller@ff6e0000 at simplebus0 not configured
[   1.0000040] /dma-controller@ff6d0000 at simplebus0 not configured
[   1.0000040] rktsadc0 at simplebus0: RK3399 Temperature Sensor ADC
[   1.0000040] rktsadc0: interrupting on GICv3 irq 129
[   1.0000040] /iommu@ff650800 at simplebus0 not configured
[   1.0000040] /iommu@ff660480 at simplebus0 not configured
[   1.0000040] sdhc0 at simplebus0: Arasan SDHCI controller
[   1.0000040] sdhc0: interrupting on GICv3 irq 43
[   1.0000040] sdhc0: SDHC 3.0, rev 16, 32-bit ADMA2, 200000 kHz, embedded slot, HS SDR50 DDR50 SDR104 HS200 1.8V, re-tuning mode 1, 1024 byte blocks
[   1.0000040] sdmmc0 at sdhc0 slot 0
[   1.0000040] spdiftx0 at simplebus0: SPDIF transmitter
[   1.0000040] /iommu@ff8f3f00 at simplebus0 not configured
[   1.0000040] dwhdmi0 at simplebus0: HDMI TX
[   1.0000040] dwhdmi0: version 2.11a, phytype 0xf3
[   1.0000040] /iommu@ff903f00 at simplebus0 not configured
[   1.0000040] /iommu@ff914000 at simplebus0 not configured
[   1.0000040] rki2s0 at simplebus0: I2S/PCM controller
[   1.0000040] rki2s0: interrupting on GICv3 irq 73
[   1.0000040] /opp-table2 at simplebus0 not configured
[   1.0000040] rki2s1 at simplebus0: I2S/PCM controller
[   1.0000040] rki2s1: interrupting on GICv3 irq 72
[   1.0000040] /spdif@ff870000 at simplebus0 not configured
[   1.0000040] awge0 at simplebus0: GMAC
[   1.0000040] WARNING: system needs entropy for security; see entropy(7)
[   1.0000040] awge0: Core version: 00001035
[   1.0000040] awge0: Ethernet address [_MAC_XXXXXXXXXX]
[   1.0000040] awge0: HW feature mask: d0f17
[   1.0000040] rgephy0 at awge0 phy 0: RTL8211E 1000BASE-T media interface
[   1.0000040] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[   1.0000040] rgephy1 at awge0 phy 1: RTL8211E 1000BASE-T media interface
[   1.0000040] rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[   1.0000040] awge0: interrupting on GICv3 irq 44
[   1.0000040] dwcmmc0 at simplebus0: DesignWare SD/MMC
[   1.0000040] dwcmmc0: interrupting on GICv3 irq 96
[   1.0000040] dwcmmc1 at simplebus0: DesignWare SD/MMC
[   1.0000040] dwcmmc1: interrupting on GICv3 irq 97
[   1.0000040] ehci0 at simplebus0: EHCI
[   1.0000040] ehci0: interrupting on GICv3 irq 58
[   1.0000040] ehci0: 1 companion controller, 1 port
[   1.0000040] ehci0: Using DMA subregion for control data structures
[   1.0000040] usb0 at ehci0: USB revision 2.0
[   1.0000040] ohci0 at simplebus0: OHCI
[   1.0000040] ohci0: interrupting on GICv3 irq 60
[   1.0000040] ohci0: OHCI version 1.0
[   1.0000040] usb1 at ohci0: USB revision 1.0
[   1.0000040] ehci1 at simplebus0: EHCI
[   1.0000040] ehci1: interrupting on GICv3 irq 62
[   1.0000040] ehci1: 1 companion controller, 1 port
[   1.0000040] ehci1: Using DMA subregion for control data structures
[   1.0000040] usb2 at ehci1: USB revision 2.0
[   1.0000040] ohci1 at simplebus0: OHCI
[   1.0000040] ohci1: interrupting on GICv3 irq 64
[   1.0000040] ohci1: OHCI version 1.0
[   1.0000040] usb3 at ohci1: USB revision 1.0
[   1.0000040] xhci0 at simplebus0: cannot switch 'otg' mode to host
[   1.0000040] xhci1 at simplebus0: DesignWare USB3 XHCI (rev. 3.00a)
[   1.0000040] xhci1: interrupting on GICv3 irq 142
[   1.0000040] usb4 at xhci1: USB revision 3.0
[   1.0000040] usb5 at xhci1: USB revision 2.0
[   1.0000040] /saradc@ff100000 at simplebus0 not configured
[   1.0000040] /syscon@ff320000/io-domains at syscon23 not configured
[   1.0000040] /video-codec@ff650000 at simplebus0 not configured
[   1.0000040] /video-codec@ff660000 at simplebus0 not configured
[   1.0000040] /rga@ff680000 at simplebus0 not configured
[   1.0000040] /efuse@ff690000 at simplebus0 not configured
[   1.0000040] /syscon@ff770000/io-domains at syscon0 not configured
[   1.0000040] /rktimer@ff850000 at simplebus0 not configured
[   1.0000040] rki2s2 at simplebus0: I2S/PCM controller
[   1.0000040] rki2s2: interrupting on GICv3 irq 71
[   1.0000040] /iommu@ff924000 at simplebus0 not configured
[   1.0000040] pwmbacklight0 at simplebus0: PWM Backlight, 0-255 (256 steps)
[   1.0000040] gpioleds0 at simplebus0: work diy
[   1.0000040] armpmu0 at simplebus0: Performance Monitor Unit
[   1.0000040] armpmu1 at simplebus0: Performance Monitor Unit
[   1.0000040] dwcwdt0 at simplebus0: DesignWare Watchdog Timer
[   1.0000040] dwcwdt0: default watchdog period is 15 seconds
[   1.0000040] gpiokeys0 at simplebus0: GPIO Key Power
[   1.0000040] /ir-receiver at simplebus0 not configured
[   1.0000040] ausoc0 at simplebus0: rockchip,rt5640-codec
[   1.0000040] /sound-dit at simplebus0 not configured
[   1.0000040] rkdrm0: [drm] Cannot find any crtc or sizes
[   1.0000040] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   1.0000040] [drm] No driver support for vblank timestamp query.
[   1.0000040] [drm] Initialized rk 1.0.0 20191109 for rkdrm0 on minor 0
[   1.0000040] rkdrm0: initialized rk 1.0.0 20191109 on minor 0
[   1.0000040] ausoc0: couldn't acquire codec dai on rt5640-sound node
[   1.8424859] cpufreqdt0: rate: 1416.000 MHz, 1125000 uV
[   1.8524830] cpufreqdt4: rate: 1800.000 MHz, 1200000 uV
[   1.8624825] sdmmc1 at dwcmmc0
[   1.8624825] sdmmc2 at dwcmm1
[   1.9124815] uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[   1.9124815] armpmu1: interrupting on GICv3 irq 23
[   1.9124815] armpmu0: couldn't initialise PMU event counteruhub1 at usb4: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[   1.9124815] uhub2 at usb5: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[   1.9224830] uhub3 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[   1.9324831] uhub4 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[   1.9324831] uhub5 at usb3: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[   3.2225108] sdhc0: timeout waiting for mask 0x3 value 0 (state=0x1fff0a06)
[   3.2325112] sdhc0: command or data phase inhibited
[   3.2425112] sdhc0: tuning did not complete, using fixed sampling clock
[   3.2425112] ld0 at sdmmc0: <0x15:0x0100:AJTD4R:0x00:0x4b91488d:0x000>
[   3.2425112] ld0: 14910 MB, 7573 cyl, 64 head, 63 sec, 512 bytes/sect x 30535680 sectors
[   3.2425112] ld0: 8-bit width, HS200, 64 MB cache, 200.000 MHz
[   3.2525122] sdmmc2: SD card status: 4-bit, C10, U1, V10
[   3.2525122] ld2 at sdmmc2: <0x9f:0x5449:00000:0x00:0x00000384:0x12c>
[   3.2525122] ld2: 30168 MB, 7661 cyl, 128 head, 63 sec, 512 bytes/sect x 61784064 sectors
[   3.2525122] ld2: 4-bit width, High-Speed/SDR25, 50.000 MHz
[   3.3525142] sdmmc1: 4-bit width, 50.000 MHz
[   3.3525142] sdmmc1: SDIO function
[   3.3525142] (manufacturer 0x2d0, product 0x4356) at sdmmc1 function 1 not configured
[   3.3525142] (manufacturer 0x2d0, product 0x4356) at sdmmc1 function 2 not configured
[   3.3525142] (manufacturer 0x2d0, product 0x4356, standard function interface code 0x2) at sdmmc1 function 3 not configured
[   4.0025290] uhub6 at uhub3 port 1: vendor 1a40 (0x1a40) USB 2.0 Hub [MTT] (0x0201), class 9/0, rev 2.00/1.00, addr 2
[   4.0025290] uhub6: multiple transaction translators
[   4.3425367] swwdog0: software watchdog initialized
[   4.3525374] WARNING: 5 errors while detecting hardware; check system log.
[   4.3525374] boot device: ld2
[   4.3525374] root on ld2a dumps on ld2b
[   4.3625375] root file system type: ffs
[   4.3625375] kern.module.path=/stand/evbarm/10.0/modules
Tue Mar 12 15:51:39 UTC 2024
Starting root file system check:
/dev/rld2a: file system is clean; not checking
fdisk: Cannot determine the number of heads
Not resizing / (/dev/ld2a): already correct size
Starting devpubd.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting file system checks:
/dev/rld2e: 224 files, 48018 free (48018 clusters)
[   5.7425688] entropy: best effort
rndctl: no entropy in seed
Waiting for entropy...done
Setting tty flags.
Starting network.
Hostname: arm64
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
Waiting for duplicate address detection to finish...
Starting dhcpcd.
Starting mdnsd.
Building databases: dev, utmp, utmpx.
Starting syslogd.
Mounting all file systems...
Clearing temporary files.
Updating fontconfig cache: done.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Starting virecover.
Starting local daemons:.
Updating motd.
Starting ntpd.
Starting sshd.
Mar 12 15:51:44 arm64 ntpd[649]: error resolving pool 2.netbsd.pool.ntp.org: Temporary failure in name resolution (2)
Starting postfix.
postfix/postlog: starting the Postfix mail system
Starting inetd.
Starting cron.
Tue Mar 12 15:51:48 UTC 2024

NetBSD/evbarm (arm64) (constty)

login: