Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2024-03-31 09:15:10
From: yamori813
Description: BCM5301X 10.0
[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[     1.000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[     1.000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[     1.000000]     2024
[     1.000000]     The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 10.0 (WZR-1750DHP) #1: Sun Mar 31 18:12:20 JST 2024
[     1.000000]         hiroki@netbsd2:/usr/home/hiroki/netbsd-src/sys/arch/evbarm/compile/obj/WZR-1750DHP
[     1.000000] total memory = 512 MB
[     1.000000] avail memory = 489 MB
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] mainbus0 (root)
[     1.000000] cpu0 at mainbus0 core 0: 800 MHz Cortex-A9 r3p0 (Cortex V7A core)
[     1.000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
[     1.000000] cpu0: L1 32KB/32B 4-way (256 set) VIPT Instruction cache
[     1.000000] cpu0: L1 32KB/32B 4-way (256 set) write-back-locking-C PIPT Data cache
[     1.000000] cpu0: L2 256KB/32B 16-way (512 set) write-back-locking-D PIPT Unified cache
[     1.000000] cpu0: unrecognized VFP version 0
[     1.000000] armperiph0 at mainbus0
[     1.000000] arml2cc0 at armperiph0: ARM PL310 r3p2 L2 Cache Controller
[     1.000000] armgic0 at armperiph0: Generic Interrupt Controller, 256 sources (245 valid)
[     1.000000] armgic0: 32 Priorities, 224 SPIs, 5 PPIs, 16 SGIs
[     1.000000] arma9tmr0 at armperiph0: A9 Global 64-bit Timer (400 MHz)
[     1.000000] arma9tmr0: interrupting on irq 27
[     1.000000] bcmcca0 at mainbus0: BCM53010 (Rev A0)
[     1.000000] bcmcca0: interrupting at irq 117
[     1.000000] com0 at bcmcca0 channel 0: ns16550a, 16-byte FIFO
[     1.000000] com0: console
[     1.000000] com1 at bcmcca0 channel 1: ns16550a, 16-byte FIFO
[     1.000000] gpio0 at bcmcca0: 24 pins
[     1.000000] bcmccb0 at mainbus0
[     1.000000] bcmmdio0 at bcmccb0: MDIO bus @ 2 MHz
[     1.000000] bcmrng0 at bcmccb0: Random Number Generator (512 bit FIFO)
[     1.000000] bcmccb0: Robo Switch init 53011
[     1.000000] bcmi2c0 at bcmccb0
[     1.000000] bcmdmu0 at bcmccb0
[     1.000000] amac0 at bcmccb0 port 0: Gigabit Ethernet Controller
[     1.000000] bcmpax0 at bcmccb0 port 0: PCI Express V2 1-lane RC Controller
[     1.000000] bcmpax0: interrupting on irqs 159-164
[     1.000000] bcmpax0: iwin[1]=0/0 iwin[2]=0/0
[     1.000000] pci0 at bcmpax0 bus 0
[     1.000000] pci0: memory space enabled, rd/line, rd/mult, wr/inv ok
[     1.000000] ppb0 at pci0 dev 0 function 0: Broadcom product 8011 (rev. 0x00)
[     1.000000] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[     1.000000] pci1 at ppb0 bus 1
[     1.000000] pci1: memory space enabled, rd/line, wr/inv ok
[     1.000000] Broadcom product 4360 (miscellaneous network, revision 0x03) at pci1 dev 0 function 0 not configured
[     1.000000] bcmpax1 at bcmccb0 port 1: PCI Express V2 1-lane RC Controller
[     1.000000] bcmpax1: interrupting on irqs 165-170
[     1.000000] bcmpax1: iwin[1]=0/0 iwin[2]=0/0
[     1.000000] pci2 at bcmpax1 bus 0
[     1.000000] pci2: memory space enabled, rd/line, rd/mult, wr/inv ok
[     1.000000] ppb1 at pci2 dev 0 function 0: Broadcom product 8011 (rev. 0x00)
[     1.000000] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[     1.000000] pci3 at ppb1 bus 1
[     1.000000] pci3: memory space enabled, rd/line, wr/inv ok
[     1.000000] Broadcom product 4331 (miscellaneous network, revision 0x02) at pci3 dev 0 function 0 not configured
[     1.000000] sdhc0 at bcmccb0: SDHC controller
[     1.000000] sdhc0: SDHC 3.0, rev 169, caps <07eec8b0/03002177>, PIO, 200000 kHz, HS SDR50 DDR50 SDR104 HS200 1.8V 3.0V 3.3V, re-tuning mode 1 (1s timer), 2048 byte blocks
[     1.000000] sdmmc0 at sdhc0 slot 0
[     1.000000] sdhc0: interrupting on irq 177
[     1.000000] bcmusb0 at bcmccb0
[     1.000000] ohci0 at bcmusb0: OHCI USB controller
[     1.000000] ohci0: OHCI version 1.0, legacy support
[     1.000000] usb0 at ohci0: USB revision 1.0
[     1.000000] ehci0 at bcmusb0: ECHI USB controller
[     1.000000] ehci0: EHCI version 1.0
[     1.000000] ehci0: 1 companion controller, 2 ports: ohci0
[     1.000000] ehci0: Using DMA subregion for control data structures
[     1.000000] usb1 at ehci0: USB revision 2.0
[     1.000000] bcmusb0: interrupting on irq 111
[     1.000000] bcmxusb0 at bcmccb0
[     1.000000] xhci0 at bcmxusb0: XHCI USB controller
[     1.000000] xhci0: xHCI version 1.0
[     1.000000] usb2 at xhci0: USB revision 3.0
[     1.000000] usb3 at xhci0: USB revision 2.0
[     1.000000] bcmxusb0: interrupting on irq 112
[     1.000000] timecounter: Timecounter "arma9tmr0" frequency 400000000 Hz quality 500
[     1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[     1.000003] uhub0 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[     1.010374] entropy: ready
[     1.010374] uhub0: 1 port with 1 removable, self powered
[     1.010374] uhub1 at usb3: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[     1.022785] uhub1: 0 ports with 0 removable, self powered
[     1.022785] autoconfiguration error: usb3: root device is not a hub
[     1.022785] uhub2 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     1.035230] uhub2: 2 ports with 2 removable, self powered
[     1.035230] uhub3 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[     1.044878] uhub3: 2 ports with 2 removable, self powered
[     2.159974] umass0 at uhub3 port 2 configuration 1 interface 0
[     2.170013] umass0: vendor 0000 (0x0000) product 0000 (0x0000), rev 2.00/0.00, addr 2
[     2.180763] umass0: using SCSI over Bulk-Only
[     3.369974] scsibus0 at umass0: 2 targets, 1 lun per target
[     3.379980] sd0 at scsibus0 target 0 lun 0: <Maxtor 6, Y160L0, YAR4> disk fixed
[     3.390007] sd0: fabricating a geometry
[     3.390007] sd0: 152 GB, 156334 cyl, 64 head, 32 sec, 512 bytes/sect x 320173056 sectors
[     3.405644] sd0: fabricating a geometry
[     3.479976] WARNING: 1 error while detecting hardware; check system log.
[     3.479976] boot device: <unknown>
[     3.492143] root on sd0a dumps on sd0b
[     3.539979] kern.module.path=/stand/evbarm/10.0/modules
[     3.539979] WARNING: no TOD clock present
[     3.552864] WARNING: using filesystem time
[     3.557069] WARNING: CHECK AND RESET THE DATE!
[     3.679980] 1.1(init): trap: signo=10 code=2 addr=0x7fffeb58 trap=0x1c06
[     3.693923] r0=7fffeff0 r1=00000000 r2=00000000 r3=00000000
[     3.693923] r4=00000000 r5=00000000 r6=00000000 r7=00000000
[     3.705386] r8=00000000 r9=00000000 rA=00000000 rB=00000000
[     3.711120] ip=7fffeb58 sp=7fffeb58 lr=7bed0588 pc=7bed0588 spsr=00000010