Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2024-04-14 13:23:58
From: Ken Wellsch
Description: NetBSD/pmax 10.0 on DECstation 5000/260 (3MAXPLUS)
>>boot 3/rz0

NetBSD/pmax 10.0 FFSv1 Primary Bootstrap

NetBSD/pmax 10.0 Secondary Bootstrap, Revision 1.5 (Thu Mar 28 08:33:33 UTC 2024)

Boot: 3/rz0
Loading: 3/rz0/netbsd.pmax
open 3/rz0/netbsd.pmax: No such file or directory
Loading: 3/rz0/netbsd
4758800+118816 [261264+254072]=0x524f44
Starting at 0x80030000

[   1.0000000] segment  0 start 00000000 size 07800000
[   1.0000000] phys segment: 0x7800000 @ 0
[   1.0000000] adding 0x2a9000 @ 0x557000 to freelist 1
[   1.0000000] adding 0x7000000 @ 0x800000 to freelist 0
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[   1.0000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[   1.0000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[   1.0000000]     2024
[   1.0000000]     The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 10.0 (GENERIC) #0: Thu Mar 28 08:33:33 UTC 2024
[   1.0000000]  [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/pmax/compile/GENERIC
[   1.0000000] DECstation 5000/260 (3MAXPLUS)
[   1.0000000] total memory = 120 MB
[   1.0000000] avail memory = 112 MB
[   1.0000000] mainbus0 (root)
[   1.0000000] cpu0 at mainbus0: MIPS R4400 CPU (0x440) Rev. 4.0 with MIPS R4010 FPC Rev. 0.0
[   1.0000000] cpu0: 48 TLB entries, 16MB max page size
[   1.0000000] cpu0: 16KB/16B direct-mapped L1 instruction cache
[   1.0000000] cpu0: 16KB/16B direct-mapped write-back L1 data cache
[   1.0000000] cpu0: 1024KB/32B direct-mapped write-back L2 unified cache
[   1.0000000] tc0 at mainbus0: 25 MHz clock
[   1.0000000] ioasic0 at tc0 slot 3 offset 0x0
[   1.0000000] le0 at ioasic0 offset 0xc0000: address [_MAC_XXXXXXXXXX]
[   1.0000000] le0: 32 receive buffers, 8 transmit buffers
[   1.0000000] zsc0 at ioasic0 offset 0x100000
[   1.0000000] vsms0 at zsc0 channel 0
[   1.0000000] wsmouse0 at vsms0 mux 0
[   1.0000000] zstty0 at zsc0 channel 1
[   1.0000000] zsc1 at ioasic0 offset 0x180000
[   1.0000000] lkkbd0 at zsc1 channel 0
[   1.0000000] lkkbd0: no keyboard
[   1.0000000] wskbd0 at lkkbd0 mux 1
[   1.0000000] zstty1 at zsc1 channel 1 (console i/o)
[   1.0000000] mcclock0 at ioasic0 offset 0x200000: mc146818 or compatible
[   1.0000000] asc0 at ioasic0 offset 0x300000: NCR53C94, 25MHz, SCSI ID 7
[   1.0000000] scsibus0 at asc0: 8 targets, 8 luns per target
[   1.0010238] scsibus0: waiting 2 seconds for devices to settle...
[   1.0908265] WARNING: system needs entropy for security; see entropy(7)
[   3.1533227] sd0 at scsibus0 target 0 lun 0: <ZULUSCSI, HARDDRIVE, 2.0> disk fixed
[   3.2548362] sd0: 4095 MB, 522 cyl, 255 head, 63 sec, 512 bytes/sect x 8388607 sectors
[   3.3498985] sd0: sync (200.00ns offset 15), 8-bit (5.000MB/s) transfers
[   3.4306252] sd1 at scsibus0 target 1 lun 0: <ZULUSCSI, HARDDRIVE, 2.0> disk fixed
[   3.5243679] sd1: 4095 MB, 522 cyl, 255 head, 63 sec, 512 bytes/sect x 8388607 sectors
[   3.6182329] sd1: sync (200.00ns offset 15), 8-bit (5.000MB/s) transfers
[   3.7001557] sd2 at scsibus0 target 2 lun 0: <ZULUSCSI, HARDDRIVE, 2.0> disk fixed
[   3.7900096] sd2: 4095 MB, 522 cyl, 255 head, 63 sec, 512 bytes/sect x 8388607 sectors
[   3.8876514] sd2: sync (200.00ns offset 15), 8-bit (5.000MB/s) transfers
[   3.9666194] sd3 at scsibus0 target 3 lun 0: <ZULUSCSI, HARDDRIVE, 2.0> disk fixed
[   4.0595261] sd3: 4095 MB, 522 cyl, 255 head, 63 sec, 512 bytes/sect x 8388607 sectors
[   4.1542873] sd3: sync (200.00ns offset 15), 8-bit (5.000MB/s) transfers
[   4.2353126] sd4 at scsibus0 target 4 lun 0: <ZULUSCSI, HARDDRIVE, 2.0> disk fixed
[   4.3486111] sd4: 4095 MB, 522 cyl, 255 head, 63 sec, 512 bytes/sect x 8388607 sectors
[   4.4462803] sd4: sync (200.00ns offset 15), 8-bit (5.000MB/s) transfers
[   4.5255857] cd0 at scsibus0 target 5 lun 0: <ZULUSCSI, CDROM, 2.0> cdrom removable
[   4.6181435] cd0: sync (200.00ns offset 15), 8-bit (5.000MB/s) transfers
[   5.1845225] swwdog0: software watchdog initialized
[   5.2899995] boot device: sd0
[   5.3255624] root on sd0a dumps on sd0b
[   5.4072039] root file system type: ffs
[   5.4540629] kern.module.path=/stand/pmax/10.0/modules
[   5.9970960] entropy: best effort
Tue Dec 31 19:01:00 EST 2024
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
Setting sysctl variables:
ddb.onpanic: 1 -> 0
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
swapctl: setting dump device to /dev/sd1b
swapctl: adding /dev/sd1b as swap device at priority 0
swapctl: setting dump device to /dev/sd2b
swapctl: adding /dev/sd2b as swap device at priority 0
Starting file system checks:
/dev/rsd1a: file system is clean; not checking
/dev/rsd2a: file system is clean; not checking
[  25.7197544] entropy: ready
Loaded entropy from /var/db/entropy-file.
Waiting for entropy...done
Setting tty flags.
Starting network.
Hostname: pmax
IPv6 mode: host
Configuring network interfaces: le0.
Adding interface aliases:.
Waiting for duplicate address detection to finish...
Starting dhcpcd.
Building databases: dev, dev, utmp, utmpx.
Starting syslogd.
Setting date via ntp.
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/sd0b
swapctl: setting dump device to /dev/sd1b
swapctl: setting dump device to /dev/sd2b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
Starting ntpd.
Starting inetd.
Starting cron.
Sun Apr 14 08:24:18 EDT 2024

NetBSD/pmax (pmax) (constty)

login: