Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2024-04-28 11:40:07
From: Ken Wellsch
Description: NetBSD/sparc64 10.0 on Sun-Fire-V240
Rebooting with command: boot Boot device: disk File and args: NetBSD IEEE 1275 Multi-FS Bootblock Version $NetBSD: bootblk.fth,v 1.17 2022/11/17 06:40:39 chs Exp $ >> NetBSD/sparc64 OpenFirmware Boot, Revision 1.20 (Thu Mar 28 08:33:33 UTC 2024) =0xb83808 Loading netbsd: 12072904+511080+333488 [742080+487570]=0xefafe8 [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.0 (GENERIC) #0: Thu Mar 28 08:33:33 UTC 2024 [ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC [ 1.0000000] total memory = 8192 MB [ 1.0000000] avail memory = 8027 MB [ 1.0000000] mainbus0 (root): SUNW,Sun-Fire-V240 (Sun Fire V240): [_HOSTID_XXXXX] [ 1.0000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1503 MHz, CPU id 0 [ 1.0000000] cpu0: manuf 3e, impl 16, mask 34 [ 1.0000000] cpu0: system tick frequency 12 MHz [ 1.0000000] cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l) [ 1.0000000] cpu1 at mainbus0: SUNW,UltraSPARC-IIIi @ 1503 MHz, CPU id 1 [ 1.0000000] cpu1: manuf 3e, impl 16, mask 34 [ 1.0000000] cpu1: system tick frequency 12 MHz [ 1.0000000] cpu1: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l) [ 1.0000000] memory-controller at mainbus0 not configured [ 1.0000000] memory-controller at mainbus0 not configured [ 1.0000000] schizo0 at mainbus0: addr 4000ff00000: Tomatillo, version 4, ign 7c0, bus B 0 to 0 [ 1.0000000] schizo0: pci0 at schizo0 [ 1.0000000] bge0 at pci0 dev 2 function 0: Broadcom BCM5704C Dual Gigabit Ethernet [ 1.0000000] bge0: interrupting at ivec 37c8 [ 1.0000000] bge0: HW config 00000000, 00000000, 00000000, 00000000 00000000 [ 1.0000000] bge0: ASIC BCM5704 A3 (0x2003), Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] brgphy0 at bge0 phy 1: BCM5704 1000BASE-T media interface, rev. 0 [ 1.0000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000000] bge1 at pci0 dev 2 function 1: Broadcom BCM5704C Dual Gigabit Ethernet [ 1.0000000] bge1: interrupting at ivec 37c9 [ 1.0000000] bge1: HW config 00000000, 00000000, 00000000, 00000000 00000000 [ 1.0000000] bge1: ASIC BCM5704 A3 (0x2003), Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] brgphy1 at bge1 phy 1: BCM5704 1000BASE-T media interface, rev. 0 [ 1.0000000] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000000] schizo1 at mainbus0: addr 4000f600000: Tomatillo, version 4, ign 780, bus A 0 to 0 [ 1.0000000] schizo1: pci1 at schizo1 [ 1.0000000] ebus0 at pci1 dev 7 function 0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00 [ 1.0000000] flashprom at ebus0 addr 0-fffff, 290-290 not configured [ 1.0000000] rtc0 at ebus0 addr 70-71: mc146818 compatible time-of-day clock: m5819p [ 1.0000000] pcfiic0 at ebus0 addr 320-321 ipl 2e [ 1.0000000] iic0 at pcfiic0: I2C bus [ 1.0000000] i2c-bridge (SUNW,i2c-imax) at iic0 addr 0x0b not configured [ 1.0000000] i2c-bridge (SUNW,i2c-imax) at iic0 addr 0x0c not configured [ 1.0000000] seeprom0 at iic0 addr 0x51: motherboard-fru-prom: size 8192 [ 1.0000000] seeprom1 at iic0 addr 0x54: chassis-fru-prom: size 8192 [ 1.0000000] seeprom2 at iic0 addr 0x58: power-supply-fru-prom: size 8192 [ 1.0000000] seeprom3 at iic0 addr 0x52: power-supply-fru-prom: size 8192 [ 1.0000000] spdmem0 at iic0 addr 0x5b [ 1.0000000] spdmem0: DDR SDRAM (registered), data ECC, 1GB, 333MHz (PC-2700) [ 1.0000000] spdmem1 at iic0 addr 0x5c [ 1.0000000] spdmem1: DDR SDRAM (registered), data ECC, 1GB, 333MHz (PC-2700) [ 1.0000000] spdmem2 at iic0 addr 0x5d [ 1.0000000] spdmem2: DDR SDRAM (registered), data ECC, 1GB, 333MHz (PC-2700) [ 1.0000000] spdmem3 at iic0 addr 0x5e [ 1.0000000] spdmem3: DDR SDRAM (registered), data ECC, 1GB, 333MHz (PC-2700) [ 1.0000000] spdmem4 at iic0 addr 0x63 [ 1.0000000] spdmem4: DDR SDRAM (registered), data ECC, 1GB, 333MHz (PC-2700) [ 1.0000000] spdmem5 at iic0 addr 0x64 [ 1.0000000] spdmem5: DDR SDRAM (registered), data ECC, 1GB, 333MHz (PC-2700) [ 1.0000000] spdmem6 at iic0 addr 0x65 [ 1.0000000] spdmem6: DDR SDRAM (registered), data ECC, 1GB, 333MHz (PC-2700) [ 1.0000000] spdmem7 at iic0 addr 0x66 [ 1.0000000] spdmem7: DDR SDRAM (registered), data ECC, 1GB, 333MHz (PC-2700) [ 1.0000000] rscrtc (i2c-ds1307) at iic0 addr 0x68 not configured [ 1.0000000] seeprom4 at iic0 addr 0x28: nvram: size 8192 [ 1.0000000] pcagpio0 at iic0 addr 0x22: PCA9555 [ 1.0000000] pcagpio1 at iic0 addr 0x23: PCA9555 [ 1.0000000] pcagpio2 at iic0 addr 0x25: PCA9555 [ 1.0000000] pcagpio3 at iic0 addr 0x34: PCA9555 [ 1.0000000] pcagpio4 at iic0 addr 0x44: PCA9555 [ 1.0000000] pcagpio5 at iic0 addr 0x38: PCA9556 [ 1.0000000] adm1026hm0 at iic0 addr 0x2e: ADM1026 hardware monitor: rev. 0x4, step. 0x5 [ 1.0000000] adm1026hm0: unable to attach temp 0 at sysmon [ 1.0000000] lmtemp0 at iic0 addr 0x4e: temperature-sensor LM75 Temperature Sensor [ 1.0000000] power at ebus0 addr 800-82f ipl 20 not configured [ 1.0000000] com0 at ebus0 addr 3f8-3ff ipl 2c: ns16550a, 16-byte FIFO [ 1.0000000] com0: console [ 1.0000000] com1 at ebus0 addr 2e8-2ef ipl 2c: ns16550a, 16-byte FIFO [ 1.0000000] rmc-comm at ebus0 addr 3e8-3ef ipl 2c not configured [ 1.0000000] alipm0 at pci1 dev 6 function 0: 223KHz clock [ 1.0000000] iic1 at alipm0: I2C bus [ 1.0000000] ohci0 at pci1 dev 10 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) [ 1.0000000] ohci0: interrupting at ivec 7a7 [ 1.0000000] ohci0: OHCI version 1.0, legacy support [ 1.0000000] usb0 at ohci0: USB revision 1.0 [ 1.0000000] aceride0 at pci1 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc4) [ 1.0000000] aceride0: using ivec 2f98 for native-PCI interrupt [ 1.0000000] atabus0 at aceride0 channel 0 [ 1.0000000] atabus1 at aceride0 channel 1 [ 1.0000000] schizo2 at mainbus0: addr 4000e600000: Tomatillo, version 4, ign 700, bus A 0 to 0 [ 1.0000000] schizo2: pci2 at schizo2 [ 1.0000000] esiop0 at pci2 dev 2 function 0: Symbios Logic 53c1010-66 (ultra3-wide scsi) [ 1.0000000] esiop0: using on-board RAM [ 1.0000000] esiop0: interrupting at ivec 2f29 [ 1.0000000] scsibus0 at esiop0: 16 targets, 8 luns per target [ 1.0000000] esiop1 at pci2 dev 2 function 1: Symbios Logic 53c1010-66 (ultra3-wide scsi) [ 1.0000000] esiop1: using on-board RAM [ 1.0000000] esiop1: interrupting at ivec 2f28 [ 1.0000000] scsibus1 at esiop1: 16 targets, 8 luns per target [ 1.0000000] schizo3 at mainbus0: addr 4000ef00000: Tomatillo, version 4, ign 740, bus B 0 to 0 [ 1.0000000] schizo3: pci3 at schizo3 [ 1.0000000] bge2 at pci3 dev 2 function 0: Broadcom BCM5704C Dual Gigabit Ethernet [ 1.0000000] bge2: interrupting at ivec 375c [ 1.0000000] bge2: HW config 00000000, 00000000, 00000000, 00000000 00000000 [ 1.0000000] bge2: ASIC BCM5704 A3 (0x2003), Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] brgphy2 at bge2 phy 1: BCM5704 1000BASE-T media interface, rev. 0 [ 1.0000000] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000000] bge3 at pci3 dev 2 function 1: Broadcom BCM5704C Dual Gigabit Ethernet [ 1.0000000] bge3: interrupting at ivec 375d [ 1.0000000] bge3: HW config 00000000, 00000000, 00000000, 00000000 00000000 [ 1.0000000] bge3: ASIC BCM5704 A3 (0x2003), Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] brgphy3 at bge3 phy 1: BCM5704 1000BASE-T media interface, rev. 0 [ 1.0000000] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000000] pcons at mainbus0 not configured [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 1.0000161] No counter-timer -- using %stick at 12MHz as system clock. [ 1.9139568] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.9139568] scsibus0: waiting 2 seconds for devices to settle... [ 1.9139568] scsibus1: waiting 2 seconds for devices to settle... [ 4.3002540] sd0 at scsibus0 target 0 lun 0: <COMPAQ, BD03685A24, HPB8> disk fixed [ 4.3913753] sd0: 34732 MB, 49855 cyl, 2 head, 713 sec, 512 bytes/sect x 71132000 sectors [ 4.5002550] sd0: sync (12.50ns offset 31), 16-bit (160.000MB/s) transfers, tagged queueing [ 13.1502532] swwdog0: software watchdog initialized [ 13.2083929] WARNING: 1 error while detecting hardware; check system log. [ 13.2884570] root on sd0a dumps on sd0b [ 13.3402544] root file system type: ffs [ 13.3853676] kern.module.path=/stand/sparc64/10.0/modules [ 13.4502540] entropy: best effort Sun Apr 28 07:38:43 EDT 2024 Starting root file system check: /dev/rsd0a: file system is clean; not checking Setting sysctl variables: ddb.onpanic: 1 -> 0 swapctl: setting dump device to /dev/sd0b swapctl: adding /dev/sd0b as swap device at priority 0 Starting file system checks: [ 14.7102550] entropy: ready Loaded entropy from /var/db/entropy-file. Waiting for entropy...done Setting tty flags. Starting network. Hostname: t105 IPv6 mode: host Configuring network interfaces:. Adding interface aliases:. Waiting for duplicate address detection to finish... Starting dhcpcd. Building databases: dev, utmp, utmpx. Starting syslogd. Setting date via ntp. Mounting all file systems... Clearing temporary files. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 swapctl: setting dump device to /dev/sd0b Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. Starting ntpd. Starting sshd. Starting inetd. Starting cron. Sun Apr 28 07:37:53 EDT 2024 NetBSD/sparc64 (t105) (constty) login: