Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2024-05-12 22:54:35
From: frank
Description: FreeBSD/amd64 on \ DFI Inc. DL631-C226CRM
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.2-RELEASE-p11 GENERIC amd64 FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (3292.47-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33275486208 (31733 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 Launching APs: 3 1 2 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de smbios0: Version: 2.7, BCD Revision: 2.7 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <ALASKA A M I> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 apei0: <ACPI Platform Error Interface> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device hdac0: <Intel Haswell HDA Controller> mem 0xf7d34000-0xf7d37fff irq 16 at device 3.0 on pci0 xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7d20000-0xf7d2ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7d3e000-0xf7d3efff irq 19 at device 22.3 on pci0 uart2: Using 1 MSI message em0: <Intel(R) I217-LM LPT> port 0xf080-0xf09f mem 0xf7d00000-0xf7d1ffff,0xf7d3d000-0xf7d3dfff irq 20 at device 25.0 on pci0 em0: EEPROM V0.13-4 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7d3c000-0xf7d3c3ff irq 16 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 hdac1: <Intel Lynx Point HDA Controller> mem 0xf7d30000-0xf7d33fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib3 igb0: <Intel(R) I210 (Copper)> port 0xe000-0xe01f mem 0xf7c00000-0xf7c7ffff,0xf7c80000-0xf7c83fff irq 17 at device 0.0 on pci3 igb0: EEPROM V3.16-0 eTrack 0x800004d8 igb0: Using 1024 TX descriptors and 1024 RX descriptors igb0: Using 4 RX queues 4 TX queues igb0: Using MSI-X interrupts with 5 vectors igb0: Ethernet address: [_MAC_XXXXXXXXXX] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7d3b000-0xf7d3b3ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7d3a000-0xf7d3a7ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (9600,n,8,1) uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC-low" frequency 1646187886 Hz quality 1000 Timecounters tick every 1.000 msec hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 hdacc1: <Realtek ALC888 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc1 pcm1: <Realtek ALC888 (Rear Analog)> at nid 20 and 24,26 on hdaa1 pcm2: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa1 pcm3: <Realtek ALC888 (Rear Digital)> at nid 30 and 31 on hdaa1 ugen2.1: <Intel EHCI root HUB> at usbus2 ugen0.1: <Intel XHCI root HUB> at usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 Trying to mount root from ufs:/dev/ada0p2 [rw]... uhub0 on usbus2 uhub1 on usbus0 uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub2 on usbus1 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <INTENSO V0609A0> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 122104MB (250069680 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <INTENSO V0609A0> ACS-2 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada1: Command Queueing enabled ada1: 122104MB (250069680 512 byte sectors) ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 Root mount waiting for: usbus0 usbus1 usbus2 CAM ses ada ses0: pass1,ada1 in 'Slot 01', SATA Slot: scbus1 target 0 ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <INTENSO SSD W0714A0> ACS-2 ATA SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXXXXXXXXXX] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada2: Command Queueing enabled ada2: 228936MB (468862128 512 byte sectors) uhub1: 21 ports with 21 removable, self powered ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 ada3: <INTENSO SSD V1027A0> ACS-2 ATA SATA 3.x device ada3: [_SERIAL_NUMBER_XXXXXXXXXXXXX] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada3: Command Queueing enabled ada3: 228936MB (468862128 512 byte sectors) ses0: pass2,ada2 in 'Slot 02', SATA Slot: scbus2 target 0 uhub0: 3 ports with 3 removable, self powered uhub2: 3 ports with 3 removable, self powered ada4 at ahcich4 bus 0 scbus4 target 0 lun 0 ada4: <INTENSO SSD W1013A0> ACS-2 ATA SATA 3.x device ada4: [_SERIAL_NUMBER_XXXXXXXXXXXXX] ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada4: Command Queueing enabled ada4: 228936MB (468862128 512 byte sectors) ses0: pass3,ada3 in 'Slot 03', SATA Slot: scbus3 target 0 Root mount waiting for: usbus1 usbus2 CAM ses ses0: pass4,ada4 in 'Slot 04', SATA Slot: scbus4 target 0 ada5 at ahcich5 bus 0 scbus5 target 0 lun 0 ada5: <INTENSO SSD V1027A0> ACS-2 ATA SATA 3.x device ada5: [_SERIAL_NUMBER_XXXXXXXXXXXXX] ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada5: Command Queueing enabled ada5: 228936MB (468862128 512 byte sectors) ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 uhub3ses0: pass5,ada5 in 'Slot 05', SATA Slot: scbus5 target 0 on uhub2 uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 uhub4 on uhub0 uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 uhub3: 6 ports with 6 removable, self powered uhub4: 8 ports with 8 removable, self powered Dual Console: Serial Primary, Video Secondary ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xf7d39000-0xf7d390ff irq 18 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 lo0: link state changed to UP em0: link state changed to UP