Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2024-06-03 16:48:32
From: nullnilaki
Description: NetBSD/alpha 8.0 on DEC Multia VX40 (The clock battery is dead on my Multia, and now it won't boot?)
?*** no timer interrupts detected ***
counted 122070 cycles in 1 tick
Multia SRM Console  BL5 V3.8-3, built on Aug 10 1995 at 03:22:55
*** keyboard not plugged in...
Keyboard error; using serial port terminal
*** Warning: NVR/TOY battery is low.  System may not boot ***
Testing Memory from 8 to 64 meg...
Wrong QSNVR version - Expected: V1.0, Received: V0.0
Initia*** no timer interrupts on CPU 0 ***
lizing QSNVR...
Executing power-up script...
*** no timer interrupts detected ***
counted 122070 cycles in 1 tick
*** Warning: NVR/TOY battery is low.  System may not boot ***
Testing Memory from 8 to 64 meg...
*** no timer interrupts on CPU 0 ***
Executing power-up script...
Testing TGA
version             	BL5 V3.8-3 Aug 10 1995 03:22:55

dka0.0.0.6.0               DKA0               RaSCSI FBSE15.2S  0134
ewa0.0.0.8.0               EWA0              [_MAC_XXXXXXXXXX]
pka0.7.0.6.0               PKA0                  SCSI Bus ID 7

64 Meg of system memory

CPU speed is 125 MHZ
Cache size is 256 Kbytes 

*** keyboard not plugged in...
Keyboard error; using serial port terminal
*** no timer interrupts detected ***
*** no timer interrupts on CPU 0 ***
Switching network ewa0.0.0.8.0 from Twisted Pair to AUI...
Switching network ewa0.0.0.8.0 from AUI to Thin Wire...
>>>sho dev
dka0.0.0.6.0               DKA0               RaSCSI FBSE15.2S  0134
ewa0.0.0.8.0               EWA0              [_MAC_XXXXXXXXXX]
pka0.7.0.6.0               PKA0                  SCSI Bus ID 7
>>>sho mem
64 Meg of system memory
>>>sho
adv_diag            	off             
auto_action         	HALT            
battery             	Dead            
boot_dev            	                
boot_file           	                
boot_osflags        	0               
boot_reset          	OFF             
bootdef_dev         	                
booted_dev          	                
booted_file         	                
booted_osflags      	                
char_set            	0
console             	graphics        
console_mode        	boot            
d_bell              	off             
d_cleanup           	on              
d_complete          	off             
d_eop               	off             
d_group             	field           
d_harderr           	halt            
d_loghard           	on              
d_loginfo           	off             
d_logsoft           	off             
d_nowrite           	                
d_omit              	                
d_oper              	off             
d_passes            	1
d_quick             	off             
d_report            	full            
d_runtime           	0
d_softerr           	continue        
d_startup           	off             
d_status            	off             
d_trace             	off             
d_verbose           	0
d_write             	0
debug_flags         	0
dump_dev            	                
enable_audit        	ON              
ewa0_arp_tries      	3
ewa0_bootp_file     	                
ewa0_bootp_server   	                
ewa0_bootp_tries    	3
ewa0_def_ginetaddr  	0.0.0.0         
ewa0_def_inetaddr   	0.0.0.0         
ewa0_def_inetfile   	                
ewa0_def_sinetaddr  	0.0.0.0         
ewa0_inet_init      	bootp           
ewa0_loop_count     	3e8
ewa0_loop_inc       	a
ewa0_loop_patt      	ffffffff
ewa0_loop_size      	2e
ewa0_lp_msg_node    	1
ewa0_mode           	Auto-Sensing    
ewa0_port           	Thin-wire       
ewa0_protocols      	MOP             
ewa0_tftp_tries     	3
exdep_data          	67B4FAF923F51141
exdep_location      	120000080       
exdep_size          	8
exdep_space         	pmem:120000078  
exdep_type          	3
gpr0                	0
gpr1                	0
gpr2                	0
language            	36
language_name       	English(American)
license             	MU              
nt_quick_boot       	ON              
os_type             	OpenVMS         
pal                 	VMS PALcode X5.48-98, OSF PALcode X1.35-67
pka0_fast           	1
pka0_host_id        	7
pwrup_console       	graphics        
pwrup_show          	ON              
pwrup_test          	ON              
pwrup_update        	ON              
qsnvr_status        	valid           
qsnvr_version       	V1.0            
rmf_auto_bflag      	0
rmf_bootdev         	                
rmf_bootname        	                
rmf_protocol        	                
rmf_script_file     	                
scsi_poll           	ON              
sys_serial_num      	                
tga_monitor_mode    	5
tga_sync_green      	0
tt_allow_login      	1
tty_dev             	0               
version             	BL5 V3.8-3 Aug 10 1995 03:22:55
>>>set console serial
>>>init
*** no timer interrupts detected ***
counted 122070 cycles in 1 tick
Multia SRM Console  BL5 V3.8-3, built on Aug 10 1995 at 03:22:55
*** keyboard not plugged in...
Keyboard error; using serial port terminal
*** Warning: NVR/TOY battery is low.  System may not boot ***
*** no timer interrupts on CPU 0 ***
Switching network ewa0.0.0.8.0 from Twisted Pair to AUI...
Switching network ewa0.0.0.8.0 from AUI to Thin Wire...
>>>set boot_osflags i
>>>boot dka0
(boot dka0.0.0.6.0 -flags i)
block 0 of dka0.0.0.6.0 is a valid boot block
reading 13 blocks from dka0.0.0.6.0
bootstrap code read in
base = 166000, image_start = 0, image_bytes = 1a00
initializing HWRPB at 2000
initializing page table at 158000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code

NetBSD/alpha 8.0 FFS Primary Bootstrap
Jumping to entry point...

NetBSD/alpha 8.0 Secondary Bootstrap, Revision 1.13 (Tue Jul 17 14:59:51 UTC 2018)

VMS PAL rev: 0x1000000010530
OSF PAL rev: 0x1000000020123
Switch to OSF PAL code succeeded.

Boot flags: i
Boot file: netbsd.orig
11899872+258576 [643752+421371]=0xc9cdf0

Entering netbsd.orig at 0xfffffc0000a01220...
Unrecognized boot flag 'i'.
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018
	[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/alpha/compile/GENERIC
(PCI ISA), 125MHz, s/n 
8192 byte page size, 1 processor.
total memory = 65536 KB
(2368 KB reserved for PROM, 63168 KB used by NetBSD)
avail memory = 49368 KB
running cgd selftest aes-xts-256 aes-xts-512 done
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), LCA-2 (21066)
lca0 at mainbus0
pci0 at lca0 bus 0
vendor 000a product 0000 (miscellaneous prehistoric, revision 0x0a) at pci0 dev 0 function 0 not configured
vendor 000a product 0000 (miscellaneous prehistoric, revision 0x0a) at pci0 dev 1 function 0 not configured
vendor 000a product 0000 (miscellaneous prehistoric, revision 0x0a) at pci0 dev 2 function 0 not configured
vendor 000a product 0000 (miscellaneous prehistoric, revision 0x0a) at pci0 dev 3 function 0 not configured
vendor 000a product 0000 (miscellaneous prehistoric, revision 0x0a) at pci0 dev 4 function 0 not configured
vendor 000a product 0000 (miscellaneous prehistoric, revision 0x0a) at pci0 dev 5 function 0 not configured
siop0 at pci0 dev 6 function 0: Symbios Logic 53c810 (fast scsi)
siop0: interrupting at isa irq 11
scsibus0 at siop0: 8 targets, 8 luns per target
sio0 at pci0 dev 7 function 0: vendor 8086 product 0484 (rev. 0x03)
tlp0 at pci0 dev 8 function 0: DECchip 21040 Ethernet, pass 2.3
tlp0: interrupting at isa irq 15
tlp0: Ethernet address [_MAC_XXXXXXXXXX]
tlp0: 10baseT, 10baseT-FDX, 10base5, manual
vendor 0047 product 0280 (miscellaneous network, revision 0x47) at pci0 dev 9 function 0 not configured
vendor 000a product 0000 (miscellaneous prehistoric, revision 0x0a) at pci0 dev 9 function 1 not configured
vendor 000a product 0000 (miscellaneous prehistoric, revision 0x0a) at pci0 dev 9 function 2 not configured
vendor 000a product 0000 (miscellaneous prehistoric, revision 0x0a) at pci0 dev 9 function 3 not configured
vendor 000a product 0000 (miscellaneous prehistoric, revision 0x0a) at pci0 dev 9 function 4 not configured
vendor 000a product 0000 (miscellaneous prehistoric, revision 0x0a) at pci0 dev 9 function 5 not configured
vendor 000a product 0000 (miscellaneous prehistoric, revision 0x0a) at pci0 dev 9 function 6 not configured
vendor 000a product 0000 (miscellaneous prehistoric, revision 0x0a) at pci0 dev 9 function 7 not configured
vendor 000a product 0000 (miscellaneous prehistoric, revision 0x0a) at pci0 dev 10 function 0 not configured
tga0 at pci0 dev 11 function 0: DC21030 step B, board type T8-02
tga0: 1024 x 768, 8bpp, Bt485 RAMDAC
tga0: interrupting at isa irq 10
wsdisplay1 at tga0 kbdmux 1
vendor 000a product 0000 (miscellaneous prehistoric, revision 0x0a) at pci0 dev 12 function 0 not configured
vendor 000a product 0000 (miscellaneous prehistoric, revision 0x0a) at pci0 dev 13 function 0 not configured
vendor 000a product 0000 (miscellaneous prehistoric, revision 0x0a) at pci0 dev 14 function 0 not configured
vendor 000a product 0000 (miscellaneous prehistoric, revision 0x0a) at pci0 dev 15 function 0 not configured
isa0 at sio0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
spkr0 at pcppi0: PC Speaker
midi0 at pcppi0: PC speaker
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq 
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
attimer0: attached to pcppi0
stray isa irq 3
stray isa irq 4
scsibus0: waiting 2 seconds for devices to settle...
pcic0: controller 0 detecting irqs with mask 0xdeb8:stray isa irq 5
stray isa irq 5
stray isa irq 5
stray isa irq 5
stray isa irq 5; stopped logging
stray isa irq 14
stray isa irq 14
stray isa irq 14
stray isa irq 14
stray isa irq 14; stopped logging
 none
pcic0: no available irq; polling for socket events
pcic0: WARNING: powerhook_establish is deprecated
pcic0: WARNING: powerhook_establish is deprecated
sd0 at scsibus0 target 0 lun 0: <RaSCSI, FBSE15.2S, 0134> disk fixed
sd0: 15279 MB, 156466 cyl, 8 head, 25 sec, 512 bytes/sect x 31293360 sectors
sd0: async, 8-bit transfers
WARNING: 3 errors while detecting hardware; check system log.
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/alpha/8.0/modules
WARNING: preposterous TOD clock time
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
Enter pathname ostray isa irq 4
stray isa irq 4
stray isa irq 4
stray isa irq 4; stopped logging