Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2024-06-24 02:42:02
From: yamori813
Description: Humax_HG100R SNP start CPU1 but not work
BOOT PARAM STRING(0x800008c4): HMXBLPA]BOOTMODE=normal;OFFSET=40788;

EBASE: 2a080
MODEL: 4
CPUS: 2
960d6c83 fffff8ff ffffffff
Cache info:
  picache_stride    = 4096
  picache_loopcount = 16
  pdcache_stride    = 4096
  pdcache_loopcount = 8
  max line size     = 16
Physical memory chunk(s):
0x416000 - 0x7ffffff, 129933312 bytes (31722 pages)
Maxmem is 0x8000000
---<<BOOT>>---
pcpu is available at virtual address 0xc0000000.
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.4-STABLE #209 zrouter_yamori813-n234900-276cfb174451-dirty: Mon Jun 24 11:30:05 JST 2024
    hiroki@zrouter:/usr/home/hiroki/obj/usr/home/hiroki/ZRouter/tmp/usr/home/hiroki/freebsd-src/mips.mips/sys/Humax_HG100R mips
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "kernel" at 0x80405d40.
CPU: Broadcom processor v128.160
  MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes)
  L1 i-cache: 4 ways of 1024 sets, 16 bytes per line
  L1 d-cache: 2 ways of 1024 sets, 16 bytes per line
  L2 cache: disabled
  Config1=0x3f1b8c86<MIPS16,EJTAG>
real memory  = 134217728 (131072K bytes)
Physical memory chunk(s):
0x004a3000 - 0x07dd8fff, 127098880 bytes (31030 pages)
avail memory = 126083072 (120MB)
AP #1 started!
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
random: no preloaded entropy cache
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
hostuuid: using 00000000-0000-0000-0000-000000000000
ULE: setup cpu 0
ULE: setup cpu 1
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
mem: <memory>
null: <full device, null device, zero device>
nexus0: <MIPS32 root nexus>
obio0: <OBIO Bus bridge> at irq 2 on nexus0
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 250000000 Hz quality 800
Event timer "MIPS32" frequency 250000000 Hz quality 800
uart0: <bcm338x> on obio0
uart0: console (115200,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
spi0: <BCM338X SPI> on obio0
spibus0: <SPI bus> on spi0
mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
mx25l0: device type mx25ll64, size 8192K in 128 sectors of 64K, erase size 64K
gpio0: <BCM338X GPIO driver> on obio0
gpio0: DieRev: c5
gpiobus0: <GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
Device configuration finished.
Timecounters tick every 10.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 2048
SMP: AP CPU #1 launched.
#@GEOM: new disk flash/spi0
MAP: flash/spi0: 0x20000, data=0x20000 "/dev/map/bootloader"
MAP: search flash/spi0 for key ".!/bin/sh" from 0x200000, step 0x10000
MAP: flash/spi0: 20000x220000, data=0x220000 "/dev/map/kernel"
MAP: search flash/spi0 for key ".!/bin/sh" from 0x200000, step 0x10000
MAP: flash/spi0: 240000x7dc0000, data=0x7dc0000 "/dev/map/rootfs"
spin lock 0x803f86b0 (smp rendezvous) held by 0x803db800 (tid 100000) too long
#timeout stopping cpus
panic: spin lock held too long
cpuid = 1
time = 58
KDB: enter: panic
[ thread pid 12 tid 100015 ]
Stopped at      _DYNAMIC_LINKING+0x3:
db>