Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-08-08 02:50:25
From: JE3KMZ
Description: FreeBSD/amd64 on ASRock 990FX Extreme4
Copyright (c) 1992-2024 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.0-CURRENT #0 main-n271539-357378bbdedf: Wed Jul 31 23:11:25 UTC 2024
[_EMAIL_XXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1024x768
CPU microcode: updated from 0x6000626 to 0x600063e
CPU: AMD FX(tm)-8120 Eight-Core Processor (3093.45-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x600f12 Family=0x15 Model=0x1 Stepping=2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x1c93fff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NodeId,Topology,PCXC,PNXC>
AMD Extended Feature Extensions ID EBX=0x1000<IBPB>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16531390464 (15765 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s)
random: unblocking device.
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20230628/tbfadt-796)
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 1 5 3 6 4 7 2
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de
smbios0: Version: 2.7, BCD Revision: 2.7
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <ALASKA A M I>
acpi0: Power Button (fixed)
AMD-Vi: IVRS Info VAsize = 64 PAsize = 52 GVAsize = 0 flags:0
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
amdiommu0 at device 0.2 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xc0000000-0xcfffffff,0xfea20000-0xfea3ffff irq 24 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <ATI RV840 HDA Controller> mem 0xfea40000-0xfea43fff irq 25 at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ahci0: <Marvell 88SE912x AHCI SATA controller> port 0xd090-0xd097,0xd080-0xd083,0xd070-0xd077,0xd060-0xd063,0xd050-0xd05f mem 0xfe915000-0xfe9157ff irq 44 at device 0.0 on pci2
ahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS
ahci0: quirks=0x1000040<EDGEIS,IOMMU_BUSWIDE>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib3: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe800000-0xfe807fff irq 46 at device 0.0 on pci3
xhci0: 64 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib4: <ACPI PCI-PCI bridge> irq 53 at device 6.0 on pci0
pci4: <ACPI PCI bus> on pcib4
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfe700000-0xfe707fff irq 51 at device 0.0 on pci4
xhci1: 64 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pcib5: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib5
fwohci0: <1394 Open Host Controller Interface> port 0xc000-0xc0ff mem 0xfe610000-0xfe6107ff irq 48 at device 0.0 on pci5
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:11:00
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB
fwohci0: PhysicalUpperBound = 0x00000000
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
atapci0: <VIA ATA controller> port 0xc140-0xc147,0xc130-0xc133,0xc120-0xc127,0xc110-0xc113,0xc100-0xc10f irq 48 at device 0.1 on pci5
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pcib6: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0
pci6: <ACPI PCI bus> on pcib6
bge0: <Broadcom BCM57765 B0, ASIC rev. 0x57785100> mem 0xd0010000-0xd001ffff,0xd0000000-0xd000ffff irq 47 at device 0.0 on pci6
bge0: CHIP ID 0x57785100; ASIC REV 0x57785; CHIP REV 0x577851; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM57765 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
ahci1: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf050-0xf05f mem 0xfeb0b000-0xfeb0b3ff irq 19 at device 17.0 on pci0
ahci1: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported
ahci1: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich4: <AHCI channel> at channel 2 on ahci1
ahcich5: <AHCI channel> at channel 3 on ahci1
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb0a000-0xfeb0afff irq 18 at device 18.0 on pci0
usbus2 on ohci0
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb09000-0xfeb090ff irq 17 at device 18.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb08000-0xfeb08fff irq 18 at device 19.0 on pci0
usbus4 on ohci1
usbus4: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb07000-0xfeb070ff irq 17 at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
usbus5: 480Mbps High Speed USB v2.0
atapci1: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 17 at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci1
ata1: <ATA channel> at channel 1 on atapci1
hdac1: <ATI SB600 HDA Controller> mem 0xfeb00000-0xfeb03fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib7: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci7: <ACPI PCI bus> on pcib7
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb06000-0xfeb06fff irq 18 at device 20.5 on pci0
usbus6 on ohci2
usbus6: 12Mbps Full Speed USB v1.0
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb05000-0xfeb05fff irq 18 at device 22.0 on pci0
usbus7 on ohci3
usbus7: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04000-0xfeb040ff irq 17 at device 22.2 on pci0
usbus8: EHCI version 1.0
usbus8 on ehci2
usbus8: 480Mbps High Speed USB v2.0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
acpi_button0: <Power Button> on acpi0
ivhd0: <AMD-Vi/IOMMU ivhd> on acpi0
ivhd0: Flag:3e<PassPW,ResPassPW,Isoc,IotlbSup,Coherent>
ivhd0: Features(type:0x10) HATS = 0 GATS = 0 MsiNumPPR = 0 PNBanks= 0 PNCounters= 0
ivhd0: max PASID = 0 GLXSup = 0 Feature:0
ivhd0: supported paging level:7, will use only: 4
ivhd0: device [0x0 - 0x2] config:0
ivhd0: device [0x10 - 0x10] config:0
ivhd0: device [0x100 - 0x101] config:0
ivhd0: device [0x20 - 0x20] config:0
ivhd0: device [0x200 - 0x201] config:0
ivhd0: device [0x28 - 0x28] config:0
ivhd0: device [0x300 - 0x300] config:0
ivhd0: device [0x30 - 0x30] config:0
ivhd0: device [0x400 - 0x400] config:0
ivhd0: device [0x48 - 0x48] config:0
ivhd0: device [0x500 - 0x501] config:0
ivhd0: device [0x50 - 0x50] config:0
ivhd0: device [0x600 - 0x600] config:0
ivhd0: device [0x88 - 0x88] config:0
ivhd0: device [0x90 - 0x92] config:0
ivhd0: device [0x98 - 0x9a] config:0
ivhd0: device [0xa0 - 0xa0] config:d7<INIT,ExtInt,NMI,LINT0,LINT1>
ivhd0: device [0xa1 - 0xa1] config:0
ivhd0: device [0xa2 - 0xa2] config:0
ivhd0: device [0xa3 - 0xa3] config:0
ivhd0: device [0xa4 - 0xa4] config:0
ivhd0: device [0x700 - 0x7ff] config:0
ivhd0: device [0xa5 - 0xa5] config:0
ivhd0: device [0xb0 - 0xb2] config:0
ivhd0: PCI cap 0x10b540f@0x40 feature:1<IOTLB>
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd3fff pnpid ORM0000 on isa0
amdsbwd0: <AMD SB8xx/SB9xx/Axx Watchdog Timer> at iomem 0xfec000f0-0xfec000f3,0xfec000f4-0xfec000f7 on isa0
amdsbwd0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounter "TSC-low" frequency 1546675690 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <(0x1b6f) XHCI root HUB> at usbus0
ugen3.1: <ATI EHCI root HUB> at usbus3
ugen4.1: <ATI OHCI root HUB> at usbus4
ugen2.1: <ATI OHCI root HUB> at usbus2
ugen1.1: <(0x1b6f) XHCI root HUB> at usbus1
ugen8.1: <ATI EHCI root HUB> at usbus8
ugen7.1: <ATI OHCI root HUB> at usbus7
ugen5.1: <ATI EHCI root HUB> at usbus5
uhub0 on usbus0
uhub0: <(0x1b6f) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1 on usbus2
uhub2 on usbus1
uhub3 on usbus8
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub2: <(0x1b6f) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub4 on usbus3
ugen6.1: <ATI OHCI root HUB> at usbus6
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub5 on usbus6
uhub6 on usbus5
uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub7 on usbus7
uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
uhub8 on usbus4
uhub8: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
pcm2: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1
pcm3: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
WARNING: WITNESS option enabled, expect reduced performance.
uhub5: 2 ports with 2 removable, self powered
uhub7: 4 ports with 4 removable, self powered
uhub8: 5 ports with 5 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub0: 4 ports with 4 removable, self powered
Root mount waiting for: CAM usbus3 usbus5 usbus8
uhub3: 4 ports with 4 removable, self powered
uhub6: 5 ports with 5 removable, self powered
uhub4: 5 ports with 5 removable, self powered
ugen8.2: <Generic USB 2.0 Reader> at usbus8
umass0 on uhub3
umass0: <Generic USB 2.0 Reader, class 0/0, rev 2.00/11.37, addr 2> on usbus8
umass0: SCSI over Bulk-Only; quirks = 0x4000
umass0:10:0: Attached to scbus10
Root mount waiting for: CAM usbus3
ugen2.2: <vendor 0x0557 product 0x8021> at usbus2
uhub9 on uhub1
uhub9: <vendor 0x0557 product 0x8021, class 9/0, rev 1.10/1.00, addr 2> on usbus2
Root mount waiting for: CAM
uhub9: 4 ports with 4 removable, self powered
ugen2.3: <ATEN International Co. Ltd CS1708A V1.6.151> at usbus2
ukbd0 on uhub9
ukbd0: <ATEN International Co. Ltd CS1708A V1.6.151, class 0/0, rev 1.10/1.00, addr 3> on usbus2
kbd2 at ukbd0
Root mount waiting for: CAM
ada0 at ahcich2 bus 0 scbus4 target 0 lun 0
ada0: <WDC WD10EZRX-00A8LB0 01.01A01> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich3 bus 0 scbus5 target 0 lun 0
ada1: <WDC WD10EFRX-68FYTN0 82.00A82> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada1: quirks=0x1<4K>
ada2 at ahcich4 bus 0 scbus6 target 0 lun 0
ada2: <Hitachi HUA722010CLA330 JP4OA3EA> ATA8-ACS SATA 2.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 953869MB (1953525168 512 byte sectors)
da0 at umass-sim0 bus 0 scbus10 target 0 lun 0
da0: <Generic 2.0 Reader -0 1.00> Removable Direct Access SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim0 bus 0 scbus10 target 0 lun 1
da1: <Generic 2.0 Reader -1 1.00> Removable Direct Access SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX]
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
cd0 at ata0 bus 0 scbus8 target 1 lun 0
cd0: <PIONEER BD-RW BDR-207M 8.10> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXX]
cd0: 150.000MB/s transfers (SATA, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
CPU: AMD FX(tm)-8120 Eight-Core Processor (3093.35-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x600f12 Family=0x15 Model=0x1 Stepping=2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x1c93fff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NodeId,Topology,PCXC,PNXC>
AMD Extended Feature Extensions ID EBX=0x1000<IBPB>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
TSC: P-state invariant, performance statistics
lo0: link state changed to UP
bge0: link state changed to DOWN
bge0: link state changed to UP
uhid0 on uhub9
uhid0: <ATEN International Co. Ltd CS1708A V1.6.151, class 0/0, rev 1.10/1.00, addr 3> on usbus2
ums0 on uhub9
ums0: <ATEN International Co. Ltd CS1708A V1.6.151, class 0/0, rev 1.10/1.00, addr 3> on usbus2
ums0: error reading report description
device_attach: ums0 attach returned 12
ums0 on uhub9
ums0: <ATEN International Co. Ltd CS1708A V1.6.151, class 0/0, rev 1.10/1.00, addr 3> on usbus2