Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-08-15 19:37:22
From: root
Description: FreeBSD/amd64 on Dell Inc. Wyse 5070 Thin Client
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.3-RELEASE-p3 GENERIC amd64 FreeBSD clang version 17.0.6 (https://github.com/llvm/llvm-project.git llvmorg-17.0.6-0-g6009708b4367) VT(vga): resolution 640x480 CPU: Intel(R) Celeron(R) J4105 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> IA32_ARCH_CAPS=0x6a<IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8055017472 (7681 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <INTEL GLK-SOC > WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 Launching APs: 2 3 1 random: entropy device external interface kbd0 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e smbios0: Version: 3.2, BCD Revision: 3.2 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> acpi0: <ALASKA A M I > acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 Timecounter "HPET" frequency 19200000 Hz quality 950 Event timer "HPET" frequency 19200000 Hz quality 550 Event timer "HPET1" frequency 19200000 Hz quality 440 Event timer "HPET2" frequency 19200000 Hz quality 440 Event timer "HPET3" frequency 19200000 Hz quality 440 Event timer "HPET4" frequency 19200000 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: Length mismatch for 3 range: 1 vs 1000000010000 pci0: <ACPI PCI bus> on pcib0 pcib0: no PRT entry for 0.0.INTA vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 vgapci0: Boot video device hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1210000-0xa1213fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 pci0: <simple comms> at device 15.0 (no driver attached) ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1214000-0xa1215fff,0xa121e000-0xa121e0ff,0xa121d000-0xa121d7ff at device 18.0 on pci0 ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 pcib1: <ACPI PCI-PCI bridge> at device 20.0 on pci0 pci1: <ACPI PCI bus> on pcib1 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xa1104000-0xa1104fff,0xa1100000-0xa1103fff at device 0.0 on pci1 re0: Using 1 MSI-X message re0: turning off MSI enable bit. re0: ASPM disabled re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1200000-0xa120ffff irq 17 at device 21.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 sdhci_pci0: <Generic SD HCI> mem 0xa1218000-0xa1218fff,0xa1217000-0xa1217fff irq 39 at device 28.0 on pci0 sdhci_pci0: 1 slot(s) allocated mmc0: <MMC/SD bus> on sdhci_pci0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC" frequency 1497601433 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: <Realtek ALC225 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC225 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC225 (Analog 2.0+HP)> at nid 20,33 on hdaa0 pcm1: <Realtek ALC225 (Front Analog Line-out)> at nid 27 on hdaa0 hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 ugen0.1: <Intel XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 mmc0: No compatible cards found on bus Trying to mount root from zfs:zroot/ROOT/default []... ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <64GB SATA Flash Drive SFDM1B4D> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 61057MB (125045424 512 byte sectors) uhub0: 16 ports with 16 removable, self powered Root mount waiting for: usbus0 ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 uhub1 on uhub0 uhub1: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 1> on usbus0 uhub1: MTT enabled uhub1: 4 ports with 4 removable, self powered Root mount waiting for: usbus0 usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device SanDisk Cruzer U (0x0781:0x55a5) usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device SanDisk Cruzer U (0x0781:0x55a5) Root mount waiting for: usbus0 ugen0.3: <SanDisk Cruzer U> at usbus0 umass0 on uhub1 umass0: <SanDisk Cruzer U, class 0/0, rev 2.00/1.27, addr 2> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x8100 umass0:1:0: Attached to scbus1 da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 da0: <SanDisk Cruzer U 1.27> Removable Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] da0: 40.000MB/s transfers da0: 14907MB (30529536 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> ugen0.4: <Generic 2-Port USB 2.0 Hub> at usbus0 uhub2 on uhub0 uhub2: <Generic 2-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 3> on usbus0 uhub2: MTT enabled uhub2: 2 ports with 2 removable, self powered ugen0.5: <Generic 4-Port USB 3.0 Hub> at usbus0 uhub3 on uhub0 uhub3: <Interrupt In Interface> on usbus0 Root mount waiting for: usbus0 uhub3: 4 ports with 4 removable, self powered ugen0.6: <Generic 2-Port USB 3.0 Hub> at usbus0 uhub4 on uhub0 uhub4: <Interrupt In Interface> on usbus0 uhub4: 2 ports with 2 removable, self powered GEOM_ELI: Device gpt/swap0.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: accelerated software Security policy loaded: TrustedBSD MAC/portacl (mac_portacl) ig4iic0: <Intel Gemini Lake I2C Controller-4> mem 0xa121c000-0xa121cfff,0xa121b000-0xa121bfff irq 31 at device 23.0 on pci0 ig4iic0: Using MSI iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 ig4iic1: <Intel Gemini Lake I2C Controller-7> mem 0xa121a000-0xa121afff,0xa1219000-0xa1219fff irq 34 at device 23.3 on pci0 ig4iic1: Using MSI iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 iicbus1: <unknown card> at addr 0x8 ichsmb0: <Intel Gemini Lake SMBus controller> port 0xf040-0xf05f mem 0xa1216000-0xa12160ff at device 31.1 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) bridge0: Ethernet address: [_MAC_XXXXXXXXXX] epair0a: Ethernet address: [_MAC_XXXXXXXXXX] epair0b: Ethernet address: [_MAC_XXXXXXXXXX] epair0a: link state changed to UP epair0b: link state changed to UP lo1: changing name to 'bastille0' bridge0: changing name to 're0bridge' lo0: link state changed to UP re0: link state changed to DOWN re0: promiscuous mode enabled re0bridge: link state changed to DOWN epair0a: promiscuous mode enabled re0bridge: link state changed to UP re0: link state changed to UP