Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-08-20 01:30:30
From: adminuser
Description: FreeBSD/amd64 on LENOVO System x3550 M5: -[5463AC1]-
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-RELEASE-p5 #0: Tue Feb 13 23:37:36 UTC 2024
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152)
VT(efifb): resolution 1024x768
CPU: Intel(R) Xeon(R) CPU E5-2640 v3 @ 2.60GHz (2600.08-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG>
Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 137434759168 (131068 MB)
avail memory = 133032906752 (126870 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO SYSTEM_X>
FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs
FreeBSD/SMP: 2 package(s) x 8 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic2: MADT APIC ID 10 != hw id 0
ioapic0 <Version 2.0> irqs 0-23
ioapic1 <Version 2.0> irqs 24-47
ioapic2 <Version 2.0> irqs 48-71
Launching APs: 1 29 15 16 25 3 30 27 22 5 17 12 31 20 11 6 18 4 19 28 13 10 21 9 24 7 14 26 2 8 23
random: entropy device external interface
kbd0 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x793fe000-0x793fe01e
smbios0: Version: 3.0, BCD Revision: 3.0
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <LENOVO SYSTEM_X>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> numa-domain 0 on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
apei0: <ACPI Platform Error Interface> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
AVAGO MegaRAID SAS FreeBSD mrsas driver version:[_IP_XXXXXXX]-fbsd
mrsas0: <AVAGO Invader SAS Controller> port 0x2e00-0x2eff mem 0x909f0000-0x909fffff,0x90a00000-0x90afffff at device 0.0 numa-domain 0 on pci1
mrsas0: FW now in Ready state
mrsas0: Using MSI-X with 32 number of vectors
mrsas0: FW supports <96> MSIX vector,Online CPU 32 Current MSIX <32>
mrsas0: mrsas_init_adapter: sc->reply_q_depth 0x740,sc->request_alloc_sz 0x1cf8, sc->reply_alloc_sz 0x3a00,sc->io_frames_alloc_sz 0x3a100
mrsas0: max sge: 0x46, max chain frame size: 0x400, max fw cmd: 0x39f sc->chain_frames_alloc_sz: 0xe7c00
mrsas0: Issuing IOC INIT command to FW.
mrsas0: IOC INIT response received from FW.
mrsas0: FW supports SED
mrsas0: VD created target ID: 0x0
mrsas0: max_fw_cmds: 927 max_scsi_cmds: 911
mrsas0: MSI-x interrupts setup success
mrsas0: mrsas_ocr_thread
pcib2: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pci2: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci0
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
isp0: <Qlogic ISP 2532 PCI FC-AL Adapter> port 0x3c00-0x3cff mem 0x90cf8000-0x90cfbfff at device 0.0 numa-domain 0 on pci3
isp1: <Qlogic ISP 2532 PCI FC-AL Adapter> port 0x3e00-0x3eff mem 0x90cfc000-0x90cfffff at device 0.1 numa-domain 0 on pci3
pci0: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Wellsburg AHCI SATA controller> port 0x1f78-0x1f7f,0x1f60-0x1f63,0x1f80-0x1f87,0x1f64-0x1f67,0x1fc0-0x1fdf mem 0x908fb000-0x908fb7ff at device 17.4 numa-domain 0 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0x38000010000-0x3800001ffff at device 20.0 numa-domain 0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x908fd000-0x908fd3ff at device 26.0 numa-domain 0 on pci0
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib4: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.3 numa-domain 0 on pci0
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
pcib6: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci5
pci6: <PCI bus> numa-domain 0 on pcib6
pcib7: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci6
pci7: <PCI bus> numa-domain 0 on pcib7
pcib8: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci7
pci8: <PCI bus> numa-domain 0 on pcib8
vgapci0: <VGA-compatible display> mem 0x92000000-0x92ffffff,0x90ffc000-0x90ffffff,0x91000000-0x917fffff irq 19 at device 0.0 numa-domain 0 on pci8
vgapci0: Boot video device
pcib9: <PCI-PCI bridge> at device 1.0 numa-domain 0 on pci6
pci9: <PCI bus> numa-domain 0 on pcib9
pci9: <unknown> at device 0.0 (no driver attached)
pcib10: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci0
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5719001> mem 0x90d60000-0x90d6ffff,0x90d50000-0x90d5ffff,0x90d40000-0x90d4ffff at device 0.0 numa-domain 0 on pci10
bge0: APE FW version: NCSI v1.3.7.0
bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5719001> mem 0x90d90000-0x90d9ffff,0x90d80000-0x90d8ffff,0x90d70000-0x90d7ffff at device 0.1 numa-domain 0 on pci10
bge1: APE FW version: NCSI v1.3.7.0
bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
bge2: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5719001> mem 0x90dc0000-0x90dcffff,0x90db0000-0x90dbffff,0x90da0000-0x90daffff at device 0.2 numa-domain 0 on pci10
bge2: APE FW version: NCSI v1.3.7.0
bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus2: <MII bus> numa-domain 0 on bge2
brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Using defaults for TSO: 65518/35/2048
bge2: Ethernet address: [_MAC_XXXXXXXXXX]
bge3: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5719001> mem 0x90df0000-0x90dfffff,0x90de0000-0x90deffff,0x90dd0000-0x90ddffff at device 0.3 numa-domain 0 on pci10
bge3: APE FW version: NCSI v1.3.7.0
bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus3: <MII bus> numa-domain 0 on bge3
brgphy3: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Using defaults for TSO: 65518/35/2048
bge3: Ethernet address: [_MAC_XXXXXXXXXX]
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x908fe000-0x908fe3ff at device 29.0 numa-domain 0 on pci0
usbus2: EHCI version 1.0
usbus2 numa-domain 0 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
ahci1: <Intel Wellsburg AHCI SATA controller> port 0x1fa0-0x1fa7,0x1f70-0x1f73,0x1fa8-0x1faf,0x1f74-0x1f77,0x1fe0-0x1fff mem 0x908ff000-0x908ff7ff at device 31.2 numa-domain 0 on pci0
ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 0 on ahci1
ahcich5: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 2 on ahci1
ahcich7: <AHCI channel> at channel 3 on ahci1
ahcich8: <AHCI channel> at channel 4 on ahci1
ahcich9: <AHCI channel> at channel 5 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
pcib11: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci11: <ACPI PCI bus> numa-domain 1 on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 1 on pci11
pci12: <ACPI PCI bus> numa-domain 1 on pcib12
mrsas1: <AVAGO Thunderbolt SAS Controller> port 0x8e00-0x8eff mem 0xc81bc000-0xc81bffff,0xc81c0000-0xc81fffff at device 0.0 numa-domain 1 on pci12
mrsas1: FW now in Ready state
mrsas1: Using MSI-X with 16 number of vectors
mrsas1: FW supports <16> MSIX vector,Online CPU 32 Current MSIX <16>
mrsas1: mrsas_init_adapter: sc->reply_q_depth 0x7e0,sc->request_alloc_sz 0x1f78, sc->reply_alloc_sz 0x3f00,sc->io_frames_alloc_sz 0x3f100
mrsas1: max sge: 0x46, max chain frame size: 0x400, max fw cmd: 0x3ef sc->chain_frames_alloc_sz: 0xfbc00
mrsas1: Issuing IOC INIT command to FW.
mrsas1: IOC INIT response received from FW.
mrsas1: System PD created target ID: 0x5d
mrsas1: VD created target ID: 0x0
mrsas1: max_fw_cmds: 1007 max_scsi_cmds: 991
mrsas1: MSI-x interrupts setup success
mrsas1: mrsas_ocr_thread
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
Timecounter "TSC-low" frequency 1299999542 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen0.1: <Intel XHCI root HUB> at usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
mrsas0: Disestablish mrsas intr hook
uhub0 numa-domain 0 on usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1 numa-domain 0 on usbus0
uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mrsas1: Disestablish mrsas intr hook
Trying to mount root from zfs:zroot/ROOT/default []...
uhub2 numa-domain 0 on usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: CAM usbus0 usbus1 usbus2
uhub2: 2 ports with 2 removable, self powered
uhub1: 21 ports with 21 removable, self powered
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub3 numa-domain 0 on uhub0
uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen0.2: <Microsoft Microsoft SiderWinderTM X4 Keyboard> at usbus0
ukbd0 numa-domain 0 on uhub1
ukbd0: <Microsoft Microsoft SiderWinderTM X4 Keyboard, class 0/0, rev 2.00/1.50, addr 1> on usbus0
kbd1 at ukbd0
ukbd1 numa-domain 0 on uhub1
ukbd1: <Microsoft Microsoft SiderWinderTM X4 Keyboard, class 0/0, rev 2.00/1.50, addr 1> on usbus0
kbd2 at ukbd1
ugen2.2: <vendor 0x8087 product 0x8002> at usbus2
uhub4 numa-domain 0 on uhub2
uhub4: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
ugen0.3: <no manufacturer Gadget USB HUB> at usbus0
uhub5 numa-domain 0 on uhub1
uhub5: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 2> on usbus0
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: CAM usbus0
uhub5: 6 ports with 6 removable, self powered
Root mount waiting for: CAM usbus0
ugen0.4: <IBM RNDIS/Ethernet Gadget> at usbus0
Root mount waiting for: CAM
Root mount waiting for: CAM
da0 at mrsas0 bus 0 scbus0 target 0 lun 0
da0: <IBM ServeRAID M5210 4.27> Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXXXXXXXXXX]
da0: 150.000MB/s transfers
da0: 6402011MB (13111318528 512 byte sectors)
da1 at mrsas1 bus 0 scbus16 target 0 lun 0
da1: <LSI MR9286-8e 3.46> Fixed Direct Access SPC-3 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXXXXXXXXXX]
da1: 150.000MB/s transfers
da1: 38149120MB (78129397760 512 byte sectors)
ses0 at ahciem0 bus 0 scbus8 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at ahciem1 bus 0 scbus15 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
ses2 at mrsas1 bus 1 scbus17 target 93 lun 0
ses2: <IBM-ESXS EXP3000 01C1> Fixed Enclosure Services SPC-2 SCSI device
ses2: 150.000MB/s transfers
ses2: SES Device
mlx4_core0: <mlx4_core> mem 0x90b00000-0x90bfffff,0x91800000-0x91ffffff at device 0.0 numa-domain 0 on pci2
mlx4_core: Mellanox ConnectX core driver v3.7.1 (November 2021)
mlx4_core: Initializing 0000:06:00.0
mlx4_core0: Unable to determine PCI device chain minimum BW
mlx4_en mlx4_core0: Activating port:1
mlxen0: Ethernet address: [_MAC_XXXXXXXXXX]
mlx4_en: mlx4_core0: Port 1: Using 32 TX rings
mlx4_en: mlx4_core0: Port 1: Using 16 RX rings
mlx4_en: mlxen0: Using 32 TX rings
mlx4_en: mlxen0: Using 16 RX rings
mlxen0: link state changed to DOWN
mlx4_en: mlxen0: Initializing port
ichsmb0: <Intel Wellsburg SMBus controller> port 0x780-0x79f at device 31.3 numa-domain 0 on pci0
smbus0: <System Management Bus> numa-domain 0 on ichsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
lo0: link state changed to UP
bge0: link state changed to DOWN
urndis0 numa-domain 0 on uhub5
urndis0: <RNDIS Communications Control> on usbus0
ue0: <USB Ethernet> on urndis0
ue0: Ethernet address: [_MAC_XXXXXXXXXX]