Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2024-09-23 10:13:29
From: gsp
Description: FreeBSD/amd64 on HP ProLiant ML350p Gen8
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.1-RELEASE-p5 GENERIC amd64
FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9)
VT(vga): resolution 640x480
module_register: cannot register pci/ciss from kernel; already loaded from ciss.ko
Module pci/ciss failed to register: 17
CPU microcode: updated from 0x718 to 0x71a
CPU: Intel(R) Xeon(R) CPU E5-2609 0 @ 2.40GHz (2394.11-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x206d7  Family=0x6  Model=0x2d  Stepping=7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 51539607552 (49152 MB)
avail memory = 50054823936 (47736 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP     ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20221020/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20221020/tbfadt-850)
ioapic1 <Version 2.0> irqs 24-47
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 3 1 2
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf4f40-0xf4f5e
smbios0: Version: 2.8, BCD Revision: 2.8
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <HP ProLiant>
acpi0: Power Button (fixed)
acpi0: _OSC failed: AE_BUFFER_OVERFLOW
cpu0: <ACPI CPU> numa-domain 0 on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
apei0: <ACPI Platform Error Interface> on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
pcib0: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci0
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 0 on pci0
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 0 on pci0
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
ciss0: <HP Smart Array P420i> port 0x5000-0x50ff mem 0xfbf00000-0xfbffffff,0xfbef0000-0xfbef03ff irq 34 at device 0.0 numa-domain 0 on pci5
ciss0: PERFORMANT Transport
pcib6: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 0 on pci0
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci0
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 0 on pci0
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 0 on pci0
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 0 on pci0
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 17.0 numa-domain 0 on pci0
pci11: <ACPI PCI bus> numa-domain 0 on pcib11
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfac60000-0xfac603ff irq 21 at device 26.0 numa-domain 0 on pci0
usbus0: EHCI version 1.0
usbus0 numa-domain 0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib12: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0
pci12: <ACPI PCI bus> numa-domain 0 on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci0
pci13: <ACPI PCI bus> numa-domain 0 on pcib13
pci0:2:0:0: error accessing writeable VPD data
bge0: <lkpi_pcimlx5_core_pci_table0, ASIC rev. 0x5719001> mem 0xfabf0000-0xfabfffff,0xfabe0000-0xfabeffff,0xfabd0000-0xfabdffff irq 16 at device 0.0 numa-domain 0 on pci13
bge0: APE FW version: NCSI v1.3.16.0
bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
pci0:2:0:1: error accessing writeable VPD data
bge1: <lkpi_pcimlx5_core_pci_table0, ASIC rev. 0x5719001> mem 0xfabc0000-0xfabcffff,0xfabb0000-0xfabbffff,0xfaba0000-0xfabaffff irq 17 at device 0.1 numa-domain 0 on pci13
bge1: APE FW version: NCSI v1.3.16.0
bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
pci0:2:0:2: error accessing writeable VPD data
bge2: <lkpi_pcimlx5_core_pci_table0, ASIC rev. 0x5719001> mem 0xfab90000-0xfab9ffff,0xfab80000-0xfab8ffff,0xfab70000-0xfab7ffff irq 16 at device 0.2 numa-domain 0 on pci13
bge2: APE FW version: NCSI v1.3.16.0
bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus2: <MII bus> numa-domain 0 on bge2
brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Using defaults for TSO: 65518/35/2048
bge2: Ethernet address: [_MAC_XXXXXXXXXX]
pci0:2:0:3: error accessing writeable VPD data
bge3: <lkpi_pcimlx5_core_pci_table0, ASIC rev. 0x5719001> mem 0xfab60000-0xfab6ffff,0xfab50000-0xfab5ffff,0xfab40000-0xfab4ffff irq 17 at device 0.3 numa-domain 0 on pci13
bge3: APE FW version: NCSI v1.3.16.0
bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus3: <MII bus> numa-domain 0 on bge3
brgphy3: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Using defaults for TSO: 65518/35/2048
bge3: Ethernet address: [_MAC_XXXXXXXXXX]
pcib14: <ACPI PCI-PCI bridge> at device 28.7 numa-domain 0 on pci0
pci14: <ACPI PCI bus> numa-domain 0 on pcib14
vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfbde0000-0xfbde3fff,0xfb000000-0xfb7fffff irq 16 at device 0.1 numa-domain 0 on pci14
vgapci0: Boot video device
uhci0: <HP iLO Standard Virtual USB controller> port 0x3c00-0x3c1f irq 16 at device 0.4 numa-domain 0 on pci14
usbus1 numa-domain 0 on uhci0
usbus1: 12Mbps Full Speed USB v1.0
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfac50000-0xfac503ff irq 20 at device 29.0 numa-domain 0 on pci0
usbus2: EHCI version 1.0
usbus2 numa-domain 0 on ehci1
usbus2: 480Mbps High Speed USB v2.0
pcib15: <PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0
pci15: <PCI bus> numa-domain 0 on pcib15
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
atapci0: <Intel Patsburg SATA600 controller> port 0x4000-0x4007,0x4008-0x400b,0x4010-0x4017,0x4018-0x401b,0x4020-0x402f,0x4030-0x403f irq 17 at device 31.2 numa-domain 0 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
atapci1: <Intel Patsburg SATA300 controller> port 0x4040-0x4047,0x4048-0x404b,0x4050-0x4057,0x4058-0x405b,0x4060-0x406f,0x4070-0x407f irq 17 at device 31.5 numa-domain 0 on pci0
ata4: <ATA channel> at channel 0 on atapci1
ata5: <ATA channel> at channel 1 on atapci1
acpi_tz0: <Thermal Zone> on acpi0
ipmi0: <IPMI System Interface> port 0xca2-0xca3 on acpi0
ipmi0: KCS mode found at io 0xca2 on acpi
acpi_syscontainer0: <System Container> port 0x2e-0x2f on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ns8250: UART FCR is broken
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0
uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0
uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
Timecounter "TSC-low" frequency 1196999951 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <HP UHCI root HUB> at usbus1
uhub0 numa-domain 0 on usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1 numa-domain 0 on usbus1
uhub1: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ipmi0: IPMI device rev. 2, firmware rev. 2.82, version 2.0, device support mask 0x8f
ugen2.1: <Intel EHCI root HUB> at usbus2
uhub2 numa-domain 0 on usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ipmi0: Number of channels 1
ipmi0: Attached watchdog
ipmi0: Establishing power cycle handler
Trying to mount root from ufs:/dev/da0s1a [rw]...
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: CAM usbus0 usbus2
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub3 numa-domain 0 on uhub0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub4 numa-domain 0 on uhub2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
Root mount waiting for: CAM usbus0 usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen2.3: <vendor 0x0424 product 0x2660> at usbus2
uhub5 numa-domain 0 on uhub4
uhub5: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 3> on usbus2
Root mount waiting for: CAM usbus2
uhub5: 2 ports with 1 removable, self powered
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <HP RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 953837MB (1953459632 512 byte sectors)
da1 at ciss0 bus 0 scbus0 target 1 lun 0
da1: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da1: 135.168MB/s transfers
da1: Command Queueing enabled
da1: 1907697MB (3906963632 512 byte sectors)
da2 at ciss0 bus 0 scbus0 target 2 lun 0
da2: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da2: 135.168MB/s transfers
da2: Command Queueing enabled
da2: 1907697MB (3906963632 512 byte sectors)
da3 at ciss0 bus 0 scbus0 target 3 lun 0
da3: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da3: 135.168MB/s transfers
da3: Command Queueing enabled
da3: 1907697MB (3906963632 512 byte sectors)
da4 at ciss0 bus 0 scbus0 target 4 lun 0
da4: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device
da4: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da4: 135.168MB/s transfers
da4: Command Queueing enabled
da4: 1907697MB (3906963632 512 byte sectors)
cd0 at ata2 bus 0 scbus3 target 1 lun 0
cd0: <hp DVDROM DH41N S100> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ioat0: <SNB IOAT Ch0> mem 0xfacf0000-0xfacf3fff irq 31 at device 4.0 numa-domain 0 on pci0
ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat1: <SNB IOAT Ch1> mem 0xface0000-0xface3fff irq 39 at device 4.1 numa-domain 0 on pci0
ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat2: <SNB IOAT Ch2> mem 0xfacd0000-0xfacd3fff irq 31 at device 4.2 numa-domain 0 on pci0
ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat3: <SNB IOAT Ch3> mem 0xfacc0000-0xfacc3fff irq 39 at device 4.3 numa-domain 0 on pci0
ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat4: <SNB IOAT Ch4> mem 0xfacb0000-0xfacb3fff irq 31 at device 4.4 numa-domain 0 on pci0
ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat5: <SNB IOAT Ch5> mem 0xfaca0000-0xfaca3fff irq 39 at device 4.5 numa-domain 0 on pci0
ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat6: <SNB IOAT Ch6> mem 0xfac90000-0xfac93fff irq 31 at device 4.6 numa-domain 0 on pci0
ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat7: <SNB IOAT Ch7> mem 0xfac80000-0xfac83fff irq 39 at device 4.7 numa-domain 0 on pci0
ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
lo0: link state changed to UP
bge0: link state changed to DOWN
bge2: link state changed to DOWN