Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-10-12 15:24:39
From: vladas
Description: FreeBSD/amd64 on AZW SER
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.1-RELEASE-p5 GENERIC amd64
FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9)
VT(efifb): resolution 2560x1440
CPU: AMD Ryzen 7 7840HS w/ Radeon 780M Graphics (3792.97-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0xa70f41 Family=0x19 Model=0x74 Stepping=1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ef8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0xf1bf97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,AVX512CD,SHA,AVX512BW,AVX512VL>
Structured Extended Features2=0x405fde<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID>
Structured Extended Features3=0x10000000<L1DFL>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x791ef257<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 28849262592 (27512 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 2 3 5 11 15 4 13 12 1 14 10 9 8 6 7
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x9ad6e000-0x9ad6e01e
smbios0: Version: 3.5, BCD Revision: 3.5
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.GPP5.RTL8], AE_NOT_FOUND (20221020/dswload2-315)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
hpet0: HPET never increments, disabling
device_attach: hpet0 attach returned 6
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xb> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
nvme0: <Generic NVMe Device> mem 0xdcf00000-0xdcf03fff at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 1.4 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <Realtek PCIe 2.5GbE Family Controller> port 0xf000-0xf0ff mem 0xdce00000-0xdce0ffff,0xdce10000-0xdce13fff at device 0.0 on pci2
re0: Using Memory Mapping!
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: version:1.100.00
re0: Ethernet address: [_MAC_XXXXXXXXXX]
This product is covered by one or more of the following patents:
US6,570,884, US6,115,776, and US6,327,625.
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
pcib3: <ACPI PCI-PCI bridge> at device 2.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 2.3 on pci0
pcib5: <ACPI PCI-PCI bridge> at device 2.4 on pci0
pci4: <ACPI PCI bus> on pcib5
nvme1: <Generic NVMe Device> mem 0xdcc00000-0xdcc03fff at device 0.0 on pci4
pcib6: <ACPI PCI-PCI bridge> at device 3.1 on pci0
pci0: <old, non-VGA display device> at device 3.2 (no driver attached)
pci0: <old, non-VGA display device> at device 3.3 (no driver attached)
pci0: <old, non-VGA display device> at device 3.4 (no driver attached)
pcib7: <ACPI PCI-PCI bridge> at device 4.1 on pci0
pcib8: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci5: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0x7c00000000-0x7c0fffffff,0xdc000000-0xdc1fffff,0xdc600000-0xdc67ffff at device 0.0 on pci5
hdac0: <ATI (0x1640) HDA Controller> mem 0xdc6c8000-0xdc6cbfff at device 0.1 on pci5
pci5: <encrypt/decrypt> at device 0.2 (no driver attached)
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdc400000-0xdc4fffff at device 0.3 on pci5
xhci0: 64 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdc300000-0xdc3fffff at device 0.4 on pci5
xhci1: 64 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pci5: <multimedia> at device 0.5 (no driver attached)
hdac1: <AMD Raven HDA Controller> mem 0xdc6c0000-0xdc6c7fff at device 0.6 on pci5
pcib9: <ACPI PCI-PCI bridge> at device 8.2 on pci0
pci6: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 8.3 on pci0
pci7: <ACPI PCI bus> on pcib10
xhci2: <XHCI (generic) USB 3.0 controller> mem 0xdc900000-0xdc9fffff at device 0.3 on pci7
xhci2: 64 bytes context size, 64-bit DMA
usbus2 on xhci2
usbus2: 5.0Gbps Super Speed USB v3.0
xhci3: <XHCI (generic) USB 3.0 controller> mem 0xdc800000-0xdc8fffff at device 0.4 on pci7
xhci3: 64 bytes context size, 64-bit DMA
usbus3 on xhci3
usbus3: 5.0Gbps Super Speed USB v3.0
pci7: <serial bus, USB> at device 0.5 (no driver attached)
pci7: <serial bus, USB> at device 0.6 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounter "TSC-low" frequency 1896436828 Hz quality 1000
Timecounters tick every 1.000 msec
ugen2.1: <AMD XHCI root HUB> at usbus2
ugen1.1: <AMD XHCI root HUB> at usbus1
ugen3.1: <AMD XHCI root HUB> at usbus3
ugen0.1: <AMD XHCI root HUB> at usbus0
uhub0 on usbus2
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
uhub1 on usbus3
uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3
uhub2 on usbus1
uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub3 on usbus0
uhub3: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
nvme0: Allocated 32MB host memory buffer
nvme1: Allocated 32MB host memory buffer
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0
hdacc1: <Realtek ALC897 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc1
pcm4: <Realtek ALC897 (Rear Analog)> at nid 20 and 24 on hdaa1
pcm5: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa1
nda0 at nvme0 bus 0 scbus0 target 0 lun 1
nda0: <Lexar SSD NM790 2TB 11296 NHP017R006272P2202>
nda0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX]
nda0: nvme version 1.4
nda0: 1953514MB (4000797360 512 byte sectors)
nda1 at nvme1 bus 0 scbus1 target 0 lun 1
nda1: <CT1000P3PSSD8 P9CR40A 2334E86F67CC>
nda1: [_SERIAL_NUMBER_XXXXXXXXX]
nda1: nvme version 1.4
nda1: 953869MB (1953525168 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
uhub3: 7 ports with 7 removable, self powered
ugen0.2: <USB USB Keyboard> at usbus0
ukbd0 on uhub3
ukbd0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 1> on usbus0
kbd2 at ukbd0
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Kingston DataTraveler 70 (0x0951:0x172b)
usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Kingston DataTraveler 70 (0x0951:0x172b)
usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Kingston DataTraveler 70 (0x0951:0x172b)
Root mount waiting for: usbus0 usbus2
ugen2.2: <Kingston DataTraveler 70> at usbus2
umass0 on uhub0
umass0: <Kingston DataTraveler 70, class 0/0, rev 2.10/2.00, addr 1> on usbus2
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Kingston DataTraveler 70 0000> Removable Direct Access SPC-2 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: 118240MB (242155520 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ugen0.3: <vendor 0x8087 product 0x0029> at usbus0
ugen0.4: <vendor 0x0000 USB OPTICAL MOUSE> at usbus0
ums0 on uhub3
ums0: <vendor 0x0000 USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 3> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=1
Cuse v0.1.37 @ /dev/cuse
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] initializing kernel modesetting (IP DISCOVERY 0x1002:0x15BF 0x1F66:0x0031 0xC2).
[drm] register mmio base: 0xDC600000
[drm] register mmio size: 524288
[drm] add ip block number 0 <soc21_common>
[drm] add ip block number 1 <gmc_v11_0>
[drm] add ip block number 2 <ih_v6_0>
[drm] add ip block number 3 <psp>
[drm] add ip block number 4 <smu>
[drm] add ip block number 5 <dm>
[drm] add ip block number 6 <gfx_v11_0>
[drm] add ip block number 7 <sdma_v6_0>
[drm] add ip block number 8 <vcn_v4_0>
[drm] add ip block number 9 <jpeg_v4_0>
[drm] add ip block number 10 <mes_v11_0>
drmn0: Fetched VBIOS from VFCT
amdgpu: ATOM BIOS: 113-PHXGENERIC-001
[drm] VCN(0) encode/decode are enabled in VM mode
drmn0: [drm] jpeg_v4_0_set_dec_ring_funcsdrmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_mes_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_mes1.bin'
drmn0: Trusted Memory Zone (TMZ) feature enabled
drmn0: PCIE atomic ops is not supported
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
drmn0: VRAM: 4096M 0x0000008000000000 - 0x00000080FFFFFFFF (4096M used)
drmn0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[drm ERROR :amdgpu_bo_init] Unable to set WC memtype for the aperture base
[drm] Detected VRAM RAM=4096M, BAR=4096M
[drm] RAM width 128bits DDR5
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 14168M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x0000008000F00000).
drmn0: successfully loaded firmware image 'amdgpu/psp_13_0_4_toc.bin'
drmn0: successfully loaded firmware image 'amdgpu/psp_13_0_4_ta.bin'
drmn0: PSP runtime database doesn't exist
drmn0: PSP runtime database doesn't exist
drmn0: successfully loaded firmware image 'amdgpu/dcn_3_1_4_dmcub.bin'
[drm] Loading DMUB firmware via PSP: version=0x08001B00
drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_imu.bin'
drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_pfp.bin'
drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_me.bin'
drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_rlc.bin'
drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_mec.bin'
drmn0: successfully loaded firmware image 'amdgpu/sdma_6_0_1.bin'
drmn0: successfully loaded firmware image 'amdgpu/vcn_4_0_2.bin'
[drm] Found VCN firmware Version ENC: 1.10 DEC: 5 VEP: 0 Revision: 0
drmn0: Will use PSP to load VCN firmware
[drm] max_doorbell_slices=255
[drm] reserve 0x4a00000 from 0x80f0000000 for PSP TMR
drmn0: RAS: optional ras ta ucode is not available
drmn0: RAP: optional rap ta ucode is not available
drmn0: SECUREDISPLAY: securedisplay ta ucode is not available
drmn0: SMU is initialized successfully!
[drm] Display Core initialized with v3.2.207!
[drm] DMUB hardware initialized: version=0x08001B00
lkpi_iic0: <LinuxKPI I2C> on drmn0
iicbus0: <Philips I2C bus> on lkpi_iic0
iic0: <I2C generic I/O> on iicbus0
lkpi_iic1: <LinuxKPI I2C> on drmn0
iicbus1: <Philips I2C bus> on lkpi_iic1
iic1: <I2C generic I/O> on iicbus1
lkpi_iic2: <LinuxKPI I2C> on drmn0
iicbus2: <Philips I2C bus> on lkpi_iic2
iic2: <I2C generic I/O> on iicbus2
lkpi_iic3: <LinuxKPI I2C> on drmn0
iicbus3: <Philips I2C bus> on lkpi_iic3
iic3: <I2C generic I/O> on iicbus3
lkpi_iic4: <LinuxKPI I2C> on drmn0
iicbus4: <Philips I2C bus> on lkpi_iic4
iic4: <I2C generic I/O> on iicbus4
lkpi_iic5: <LinuxKPI I2C> on drmn0
iicbus5: <Philips I2C bus> on lkpi_iic5
iic5: <I2C generic I/O> on iicbus5
lkpi_iic6: <LinuxKPI I2C> on drmn0
iicbus6: <Philips I2C bus> on lkpi_iic6
iic6: <I2C generic I/O> on iicbus6
lkpi_iic7: <LinuxKPI I2C> on drmn0
iicbus7: <Philips I2C bus> on lkpi_iic7
iic7: <I2C generic I/O> on iicbus7
lkpi_iic8: <LinuxKPI I2C> on drmn0
iicbus8: <Philips I2C bus> on lkpi_iic8
iic8: <I2C generic I/O> on iicbus8
[drm] kiq ring mec 3 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under DPG Mode).
drmn0: [drm] jpeg_v4_0_hw_initdrmn0: SE 1, SH per SE 2, CU per SH 6, active_cu_number 12
drmn0: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
drmn0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
drmn0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
drmn0: ring comp_1.2.0 uses VM inv eng 6 on hub 0
drmn0: ring comp_1.3.0 uses VM inv eng 7 on hub 0
drmn0: ring comp_1.0.1 uses VM inv eng 8 on hub 0
drmn0: ring comp_1.1.1 uses VM inv eng 9 on hub 0
drmn0: ring comp_1.2.1 uses VM inv eng 10 on hub 0
drmn0: ring comp_1.3.1 uses VM inv eng 11 on hub 0
drmn0: ring sdma0 uses VM inv eng 12 on hub 0
drmn0: ring vcn_unified_0 uses VM inv eng 0 on hub 1
drmn0: ring jpeg_dec uses VM inv eng 1 on hub 1
drmn0: ring mes_kiq_3.1.0 uses VM inv eng 13 on hub 0
[drm] ring gfx_32768.1.1 was added
[drm] ring compute_32768.2.2 was added
[drm] ring sdma_32768.3.3 was added
[drm] ring gfx_32768.1.1 test pass
[drm] ring gfx_32768.1.1 ib test pass
[drm] ring compute_32768.2.2 test pass
[drm] ring compute_32768.2.2 ib test pass
[drm] ring sdma_32768.3.3 test pass
[drm] ring sdma_32768.3.3 ib test pass
vgapci0: child drmn0 requested pci_get_powerstate
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
lkpi_iic9: <LinuxKPI I2C> on drm1
iicbus9: <Philips I2C bus> on lkpi_iic9
iic9: <I2C generic I/O> on iicbus9
lkpi_iic10: <LinuxKPI I2C> on drm3
iicbus10: <Philips I2C bus> on lkpi_iic10
iic10: <I2C generic I/O> on iicbus10
lkpi_iic11: <LinuxKPI I2C> on drm4
iicbus11: <Philips I2C bus> on lkpi_iic11
iic11: <I2C generic I/O> on iicbus11
lkpi_iic12: <LinuxKPI I2C> on drm5
iicbus12: <Philips I2C bus> on lkpi_iic12
iic12: <I2C generic I/O> on iicbus12
lkpi_iic13: <LinuxKPI I2C> on drm6
iicbus13: <Philips I2C bus> on lkpi_iic13
iic13: <I2C generic I/O> on iicbus13
lkpi_iic14: <LinuxKPI I2C> on drm7
iicbus14: <Philips I2C bus> on lkpi_iic14
iic14: <I2C generic I/O> on iicbus14
lkpi_iic15: <LinuxKPI I2C> on drm8
iicbus15: <Philips I2C bus> on lkpi_iic15
iic15: <I2C generic I/O> on iicbus15
lkpi_iic16: <LinuxKPI I2C> on drm9
iicbus16: <Philips I2C bus> on lkpi_iic16
iic16: <I2C generic I/O> on iicbus16
[drm] Initialized amdgpu 3.49.0 20150101 for drmn0 on minor 0
VT: Replacing driver "efifb" with new "drmfb".
[drm] DSC precompute is not needed.
[drm] REG_WAIT timeout 1us * 100000 tries - optc314_disable_crtc line:148
start FB_INFO:
height=1440 width=2560 depth=32
pbase=0x0 vbase=0xfffffe0273b06000
name=drmn0 id=amdgpudrmfb flags=0x0 stride=10240
end FB_INFO
Intel(R) Wireless WiFi based driver for FreeBSD
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
intsmb0: Could not allocate I/O space
device_attach: intsmb0 attach returned 6
iwlwifi0: <iwlwifi> mem 0xdcd00000-0xdcd03fff at device 0.0 on pci3
iwlwifi0: Detected crf-id 0x3617, cnv-id 0x100530 wfpm id 0x80000000
iwlwifi0: PCI dev 2723/0084, rev=0x340, rfid=0x10a100
iwlwifi0: successfully loaded firmware image 'iwlwifi-cc-a0-77.ucode'
iwlwifi0: api flags index 2 larger than supported by driver
iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version:[_IP_XXXXX]
iwlwifi0: loaded firmware version 77.2df8986f.0 cc-a0-77.ucode op_mode iwlmvm
iwlwifi0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340
iwlwifi0: Detected RF HR B3, rfid=0x10a100
iwlwifi0: base HW address: [_MAC_XXXXXXXXXX]
intsmb0: <AMD FCH SMBus Controller> port 0xff00-0xff0f at device 20.0 on pci0
intsmb0: Could not allocate I/O space
device_attach: intsmb0 attach returned 6
intsmb0: <AMD FCH SMBus Controller> port 0xff00-0xff0f at device 20.0 on pci0
intsmb0: Could not allocate I/O space
device_attach: intsmb0 attach returned 6
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
lo0: link state changed to UP
re0: link state changed to UP
Invalid TXQ id
iwl_mvm_tx_mpdu:1204: fc 0x00b0 tid 8 txq_id 65535 mvm 0xfffffe0274a9a4c8 skb 0xfffff800143e5000 { len 30 } info 0xfffffe00dab3fcd8 sta 0xfffff800383fd080 (if you see this please report to PR 274382)
iwl_mvm_tx_mpdu:1204: fc 0x00b0 tid 8 txq_id 65535 mvm 0xfffffe0274a9a4c8 skb 0xfffff800143e5000 { len 30 } info 0xfffffe00dab3fcd8 sta 0xfffff800383fd080 (if you see this please report to PR 274382)
uhid0 on uhub3
uhid0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 1> on usbus0