Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-10-13 10:28:12
From: johnny-mnemonic
Description: OpenBSD/sgi 7.5 MP on SGI Origin200 with octeon fs, see github.com/the-machine-hall/openbsd-src/releases/tag/openbsd.75.sgi
>> printenv
AutoLoad=No
dbgtty=/dev/tty/ioc30
nonstop=0
rbaud=19200
SystemPartition=bootp():
OSLoadPartition=bootp():
TimeZone=PST8PDT
console=d1
oldConsolePath=/hw/module/1/slot/MotherBoard
gConsoleIn=default
gConsoleOut=default
diskless=1
scsihostid=00
ProbeAllScsi=n
RestorePartEnv=y
dbaud=9600
volume=80
sgilogo=y
ConsoleOut=/dev/tty/ioc30
ConsoleIn=/dev/tty/ioc30
cpufreq=270
ConsolePath=/hw/module/1/slot/MotherBoard
>> boot
Setting $netaddr to[_IP_XXXXXXX] (from server )
Obtaining / from server
7295056+739552 entry: 0xa800000000040000
ARCS64 Firmware
Found SGI-IP27, setting up.
Machine is in M mode.
Initial setup done, switching console.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2024 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.5 (GENERIC-IP27.MP) #0: Sun Mar 10 18:42:18 CET 2024
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/sys/arch/sgi/compile/GENERIC-IP27.MP
real mem = 2147483648 (2048MB)
rsvd mem = 12599296 (13MB)
avail mem = 2107539456 (2009MB)
warning: no entropy supplied by boot loader
random: boothowto does not indicate good seed
mainbus0 at root: Origin 200
cpu0 at mainbus0 nasid 0: MIPS R12000 CPU rev 2.3 270 MHz, R12000 FPU rev 2.3
cpu0: cache L1-I 32KB D 32KB 2 way, L2 4096KB 2 way
clock0 at mainbus0 nasid 0: int 5
cpu1 at mainbus0 nasid 0: MIPS R12000 CPU rev 2.3 270 MHz, R12000 FPU rev 2.3
cpu1: cache L1-I 32KB D 32KB 2 way, L2 4096KB 2 way
xbow0 at mainbus0 nasid 0: Bridge revision 4
xbridge0 at xbow0 widget 8: Bridge revision 4
xbpci0 at xbridge0 bus 0: 33 MHz PCI bus
pci0 at xbpci0 bus 0
qlw0 at pci0 dev 0 function 0 "QLogic ISP1020" rev 0x05: irq 0, xbow irq 62
qlw0: nvram corrupt
qlw0: firmware rev 4.66.0, attrs 0x0
scsibus0 at qlw0: 16 targets, initiator 0
qlw1 at pci0 dev 1 function 0 "QLogic ISP1020" rev 0x05: irq 1, xbow irq 61
qlw1: nvram corrupt
qlw1: firmware rev 4.66.0, attrs 0x0
qlw1: ignoring premature mbox int
scsibus1 at qlw1: 16 targets, initiator 0
cd0 at scsibus1 targ 6 lun 0: <TOSHIBA, CD-ROM XM-6201TA, 1037> removable
ioc0 at pci0 dev 2 function 0 "SGI IOC3" rev 0x01
onewire0 at ioc0
owmac0 at onewire0 family 0x11 sn xxxxxxxxxxxx
owmac0: Ethernet Address xx:xx:xx:xx:xx:xx
ioc0: ethernet irq 2, xbow irq 60
ioc0: superio irq 3, xbow irq 59
com0 at ioc0 base 0x20178: ns16550a, 16 byte fifo
com0: console
com1 at ioc0 base 0x20170: ns16550a, 16 byte fifo
iockbc0 at ioc0
iec0 at ioc0: 128KB SSRAM, address xx:xx:xx:xx:xx:xx
nsphy0 at iec0 phy 31: DP83840 10/100 PHY, rev. 1
lpt at ioc0 not configured
dsrtc0 at ioc0: DS1742W
qla0 at pci0 dev 5 function 0 "QLogic ISP2200" rev 0x05: irq 5, xbow irq 58
qla0: firmware rev 2.2.6, attrs 0x7
scsibus2 at qla0: 256 targets, WWPN xxxxxxxxxxxxxxxx, WWNN xxxxxxxxxxxxxxxx
/dev/ksyms: Symbol table not valid.
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
boot device: 'bootp():' unrecognized.
root device:
use one of: exit cd0[a-p] iec0
root device: iec0
nfs_boot: using interface iec0, with revarp & bootparams
nfs_boot: client_addr=172.16.2.144
nfs_boot: server_addr=172.16.0.1 hostname=origin200
root on[_IP_XXXXX]:/srv/nfs/origin200/root
swap on[_IP_XXXXX]:/srv/nfs/origin200/swap
cpu1 launched
Automatic boot in progress: starting file system checks.
pf enabled
starting network
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
swapctl: adding[_IP_XXXXX]:/srv/nfs/openbsd/snapshots/1710000002/octeon/hosts/indy/swap as swap device at priority 0
kvm_mkdb: can't open /dev/ksyms
savecore: /bsd: kvm_read: version misread
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
starting local daemons: cron.
Tue Mar 12 14:05:37 CET 2024
OpenBSD/sgi (origin200.machine-hall.org) (console)
login: root
Last login: Sat Oct 14 10:51:46 on console
OpenBSD 7.5 (GENERIC-IP27.MP) #0: Sun Mar 10 18:42:18 CET 2024
Welcome to OpenBSD: The proactively secure Unix-like operating system.
Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code. With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.
You have mail.
origin200# machine
octeon
origin200# sysctl hw
hw.machine=sgi
hw.model=IP27
hw.ncpu=2
hw.byteorder=4321
hw.pagesize=16384
hw.disknames=cd0:
hw.diskcount=1
hw.cpuspeed=269
hw.vendor=SGI
hw.product=Origin 200
hw.physmem=2147483648
hw.usermem=2147434496
hw.ncpufound=2
hw.allowpowerdown=1
hw.ncpuonline=2
hw.power=1
hw.ucomnames=
origin200#