Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-10-13 14:28:30
From: johnny-mnemonic
Description: OpenBSD/sgi 7.6 MP on dual node SGI R10000 Origin200 with octeon fs, something is unfortunately broken, see https://github.com/the-machine-hall/openbsd-sgi/issues/3
>> printenv
AutoLoad=No
dbgtty=/dev/tty/ioc30
root=dks0d1s0
nonstop=0
rbaud=19200
SystemPartition=bootp():
OSLoadPartition=bootp():
TimeZone=PST8PDT
console=d1
oldConsolePath=/hw/module/1/slot/MotherBoard
gConsoleIn=default
gConsoleOut=default
diskless=1
scsihostid=00
ProbeAllScsi=n
RestorePartEnv=y
dbaud=9600
volume=80
sgilogo=y
ConsoleOut=/dev/tty/ioc30
ConsoleIn=/dev/tty/ioc30
cpufreq=180
ConsolePath=/hw/module/1/slot/MotherBoard
>> boot
Setting $netaddr to[_IP_XXXXXXX] (from server )
Obtaining / from server
7317936+731440 entry: 0xa800000000040000
ARCS64 Firmware
Found SGI-IP27, setting up.
Machine is in M mode.
Initial setup done, switching console.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2024 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.6 (GENERIC-IP27.MP) #0: Mon Sep 23 12:40:55 CEST 2024
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/sys/arch/sgi/compile/GENERIC-IP27.MP
real mem = 1207959552 (1152MB)
rsvd mem = 12599296 (13MB)
avail mem = 1176174592 (1121MB)
warning: no entropy supplied by boot loader
random: boothowto does not indicate good seed
mainbus0 at root: Origin 200
cpu0 at mainbus0 nasid 0: MIPS R10000 CPU rev 3.1 180 MHz, R10000 FPU rev 3.1
cpu0: cache L1-I 32KB D 32KB 2 way, L2 1024KB 2 way
clock0 at mainbus0 nasid 0: int 5
cpu1 at mainbus0 nasid 0: MIPS R10000 CPU rev 3.1 180 MHz, R10000 FPU rev 3.1
cpu1: cache L1-I 32KB D 32KB 2 way, L2 1024KB 2 way
xbow0 at mainbus0 nasid 0: Bridge revision 3
xbridge0 at xbow0 widget 8: Bridge revision 3
xbpci0 at xbridge0 bus 0: 33 MHz PCI bus
pci0 at xbpci0 bus 0
qlw0 at pci0 dev 0 function 0 "QLogic ISP1020" rev 0x05: irq 0, xbow irq 62
qlw0: nvram corrupt
qlw0: firmware rev 4.66.0, attrs 0x0
scsibus0 at qlw0: 16 targets, initiator 0
qlw1 at pci0 dev 1 function 0 "QLogic ISP1020" rev 0x05: irq 1, xbow irq 61
qlw1: nvram corrupt
qlw1: firmware rev 4.66.0, attrs 0x0
scsibus1 at qlw1: 16 targets, initiator 0
ioc0 at pci0 dev 2 function 0 "SGI IOC3" rev 0x01
onewire0 at ioc0
owmac0 at onewire0 family 0x11 sn xxxxxxxxxxxx
owmac0: Ethernet Address xx:xx:xx:xx:xx:xx
ioc0: ethernet irq 2, xbow irq 60
ioc0: superio irq 3, xbow irq 59
com0 at ioc0 base 0x20178: ns16550a, 16 byte fifo
com0: console
com1 at ioc0 base 0x20170: ns16550a, 16 byte fifo
iockbc0 at ioc0
iec0 at ioc0: 128KB SSRAM, address xx:xx:xx:xx:xx:xx
nsphy0 at iec0 phy 31: DP83840, rev. 1
lpt at ioc0 not configured
dsrtc0 at ioc0: DS1742W
Trap cause = 4 Frame 0xffffffff8001fcb8
Trap PC 0xa8000000002935c0 RA 0xa800000000154b78 fault 0x9600000100070069
0xa800000000293414 (9600000100070069,c000000000014200,a800000000153840,c000000000014200) ra 0xa800000000154b78 sp 0xffffffff8
001fe10, sz 0
0xa800000000154a9c (9600000100070069,c000000000014200,a800000000153840,c000000000014200) ra 0x0 sp 0xffffffff8001fe10, sz 0
User-level: pid 0
stopped on non ddb fault
Stopped at 0xa8000000002935c0: lw v0,0(s0)
ddb{0}>