Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-10-14 10:14:00
From: extrowerk
Description: Radxa Zero 3W OpenBSD 7.6
DDR 2d653b3476 typ 24/01/20-15:04:19,fwver: v1.21
ln
LP4/4x derate en, other dram:1x trefi
ddrconfig:7
LPDDR4, 324MHz
BW=32 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=16 Size=8192MB
tdqss: cs0 dqs0: -48ps, dqs1: -144ps, dqs2: -96ps, dqs3: -144ps,
tdqss: cs1 dqs0: -48ps, dqs1: -144ps, dqs2: -96ps, dqs3: -120ps,
change to: 324MHz
PHY drv:clk:38,ca:38,DQ:30,odt:0
vrefinner:41%, vrefout:41%
dram drv:40,odt:0
clk skew:0x63
rx vref: 41.9%
tx vref: 38.0%
change to: 528MHz
PHY drv:clk:38,ca:38,DQ:30,odt:0
vrefinner:41%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58
rx vref: 41.9%
tx vref: 38.0%
change to: 780MHz
PHY drv:clk:38,ca:38,DQ:30,odt:60
vrefinner:16%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58
rx vref: 15.4%
tx vref: 38.0%
change to: 1056MHz(final freq)
PHY drv:clk:38,ca:38,DQ:30,odt:60
vrefinner:16%, vrefout:29%
dram drv:40,odt:80
vref_ca:00000068
clk skew:0x32
rx vref: 14.4%
tx vref: 32.0%
cs 0:
the read training result:
DQS0:0x3a, DQS1:0x39, DQS2:0x34, DQS3:0x36,
min : 0xa 0xb 0xc 0x8 0x0 0x4 0x8 0x1 , 0x7 0x5 0x3 0x0 0xb 0xc 0xe 0xb ,
0x2 0x2 0x1 0x2 0x0 0x1 0x1 0x3 , 0x2 0x6 0x6 0x1 0x6 0x6 0x2 0x4 ,
mid :0x27 0x28 0x29 0x26 0x1f 0x21 0x24 0x1e ,0x24 0x22 0x1f 0x1d 0x28 0x27 0x29 0x27 ,
0x1f 0x1e 0x1c 0x1e 0x1c 0x1d 0x1c 0x1f ,0x1d 0x20 0x20 0x1b 0x20 0x20 0x1d 0x1e ,
max :0x44 0x45 0x47 0x45 0x3e 0x3e 0x41 0x3c ,0x42 0x40 0x3b 0x3b 0x46 0x43 0x45 0x44 ,
0x3c 0x3a 0x38 0x3b 0x39 0x39 0x38 0x3c ,0x39 0x3a 0x3b 0x36 0x3b 0x3b 0x39 0x39 ,
range:0x3a 0x3a 0x3b 0x3d 0x3e 0x3a 0x39 0x3b ,0x3b 0x3b 0x38 0x3b 0x3b 0x37 0x37 0x39 ,
0x3a 0x38 0x37 0x39 0x39 0x38 0x37 0x39 ,0x37 0x34 0x35 0x35 0x35 0x35 0x37 0x35 ,
the write training result:
DQS0:0x2c, DQS1:0x1f, DQS2:0x26, DQS3:0x22,
min :0x56 0x56 0x57 0x56 0x4f 0x51 0x54 0x50 0x52 ,0x48 0x46 0x43 0x42 0x4a 0x4b 0x4b 0x4a 0x48 ,
0x4c 0x4c 0x4b 0x4d 0x4b 0x4a 0x4c 0x4d 0x48 ,0x46 0x48 0x48 0x46 0x48 0x4a 0x46 0x47 0x48 ,
mid :0x71 0x72 0x72 0x71 0x69 0x6b 0x6f 0x6a 0x6c ,0x64 0x61 0x5c 0x5c 0x66 0x66 0x66 0x65 0x62 ,
0x67 0x67 0x63 0x67 0x62 0x62 0x63 0x65 0x60 ,0x5e 0x5f 0x5f 0x5c 0x5f 0x61 0x5e 0x5e 0x60 ,
max :0x8d 0x8e 0x8e 0x8c 0x84 0x86 0x8a 0x84 0x86 ,0x80 0x7c 0x75 0x76 0x83 0x82 0x81 0x80 0x7c ,
0x83 0x82 0x7b 0x81 0x7a 0x7b 0x7b 0x7d 0x79 ,0x76 0x77 0x76 0x73 0x77 0x78 0x77 0x76 0x79 ,
range:0x37 0x38 0x37 0x36 0x35 0x35 0x36 0x34 0x34 ,0x38 0x36 0x32 0x34 0x39 0x37 0x36 0x36 0x34 ,
0x37 0x36 0x30 0x34 0x2f 0x31 0x2f 0x30 0x31 ,0x30 0x2f 0x2e 0x2d 0x2f 0x2e 0x31 0x2f 0x31 ,
cs 1:
the read training result:
DQS0:0x3a, DQS1:0x39, DQS2:0x34, DQS3:0x36,
min : 0xa 0xb 0xc 0x8 0x0 0x4 0x8 0x1 , 0x7 0x5 0x3 0x0 0xb 0xc 0xe 0xb ,
0x2 0x2 0x1 0x2 0x0 0x1 0x1 0x3 , 0x2 0x6 0x6 0x1 0x6 0x6 0x2 0x4 ,
mid :0x27 0x28 0x29 0x26 0x1f 0x21 0x24 0x1e ,0x24 0x22 0x1f 0x1d 0x28 0x27 0x29 0x27 ,
0x1f 0x1e 0x1c 0x1e 0x1c 0x1d 0x1c 0x1f ,0x1d 0x20 0x20 0x1b 0x20 0x20 0x1d 0x1e ,
max :0x44 0x45 0x47 0x45 0x3e 0x3e 0x41 0x3c ,0x42 0x40 0x3b 0x3b 0x46 0x43 0x45 0x44 ,
0x3c 0x3a 0x38 0x3b 0x39 0x39 0x38 0x3c ,0x39 0x3a 0x3b 0x36 0x3b 0x3b 0x39 0x39 ,
range:0x3a 0x3a 0x3b 0x3d 0x3e 0x3a 0x39 0x3b ,0x3b 0x3b 0x38 0x3b 0x3b 0x37 0x37 0x39 ,
0x3a 0x38 0x37 0x39 0x39 0x38 0x37 0x39 ,0x37 0x34 0x35 0x35 0x35 0x35 0x37 0x35 ,
the write training result:
DQS0:0x2c, DQS1:0x1f, DQS2:0x26, DQS3:0x22,
min :0x56 0x56 0x57 0x56 0x4f 0x51 0x54 0x50 0x52 ,0x48 0x46 0x43 0x42 0x4a 0x4b 0x4b 0x4a 0x48 ,
0x4c 0x4c 0x4b 0x4d 0x4b 0x4a 0x4c 0x4d 0x48 ,0x46 0x48 0x48 0x46 0x48 0x4a 0x46 0x47 0x48 ,
mid :0x71 0x72 0x72 0x71 0x69 0x6b 0x6f 0x6a 0x6c ,0x64 0x61 0x5c 0x5c 0x66 0x66 0x66 0x65 0x62 ,
0x67 0x67 0x63 0x67 0x62 0x62 0x63 0x65 0x60 ,0x5e 0x5f 0x5f 0x5c 0x5f 0x61 0x5e 0x5e 0x60 ,
max :0x8d 0x8e 0x8e 0x8c 0x84 0x86 0x8a 0x84 0x86 ,0x80 0x7c 0x75 0x76 0x83 0x82 0x81 0x80 0x7c ,
0x83 0x82 0x7b 0x81 0x7a 0x7b 0x7b 0x7d 0x79 ,0x76 0x77 0x76 0x73 0x77 0x78 0x77 0x76 0x79 ,
range:0x37 0x38 0x37 0x36 0x35 0x35 0x36 0x34 0x34 ,0x38 0x36 0x32 0x34 0x39 0x37 0x36 0x36 0x34 ,
0x37 0x36 0x30 0x34 0x2f 0x31 0x2f 0x30 0x31 ,0x30 0x2f 0x2e 0x2d 0x2f 0x2e 0x31 0x2f 0x31 ,
CA Training result:
cs:0 min :0x3f 0x38 0x36 0x2c 0x33 0x2c 0x3b ,0x40 0x39 0x34 0x29 0x32 0x2b 0x39 ,
cs:0 mid :0x7b 0x79 0x72 0x6e 0x6f 0x6e 0x68 ,0x7c 0x7b 0x70 0x6a 0x6f 0x6d 0x66 ,
cs:0 max :0xb7 0xbb 0xae 0xb1 0xac 0xb0 0x95 ,0xb9 0xbe 0xad 0xac 0xad 0xaf 0x94 ,
cs:0 range:0x78 0x83 0x78 0x85 0x79 0x84 0x5a ,0x79 0x85 0x79 0x83 0x7b 0x84 0x5b ,
cs:1 min :0x40 0x3b 0x39 0x30 0x36 0x30 0x39 ,0x43 0x3c 0x37 0x2b 0x37 0x2e 0x3a ,
cs:1 mid :0x7d 0x7d 0x75 0x72 0x73 0x72 0x69 ,0x7f 0x7e 0x74 0x6d 0x73 0x70 0x6a ,
cs:1 max :0xba 0xbf 0xb2 0xb4 0xb1 0xb5 0x9a ,0xbc 0xc0 0xb1 0xaf 0xaf 0xb3 0x9a ,
cs:1 range:0x7a 0x84 0x79 0x84 0x7b 0x85 0x61 ,0x79 0x84 0x7a 0x84 0x78 0x85 0x60 ,
out
U-Boot SPL 2024.10 (Oct 13 2024 - 22:28:50 +0200)
Trying to boot from MMC2
## Checking hash(es) for config config-1 ... OK
## Checking hash(es) for Image atf-1 ... sha256+ OK
## Checking hash(es) for Image u-boot ... sha256+ OK
## Checking hash(es) for Image fdt-1 ... sha256+ OK
## Checking hash(es) for Image atf-2 ... sha256+ OK
## Checking hash(es) for Image atf-3 ... sha256+ OK
## Checking hash(es) for Image atf-4 ... sha256+ OK
## Checking hash(es) for Image atf-5 ... sha256+ OK
## Checking hash(es) for Image atf-6 ... sha256+ OK
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-645-g8cea6ab0b:cl, fwver: v1.44
NOTICE: BL31: Built : 16:36:43, Sep 19 2023
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: pmu v1 is valid 220114
INFO: l3 cache partition cfg-0
INFO: dfs DDR fsp_param[0].freq_mhz= 1056MHz
INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz
INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz
INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR: Error initializing runtime service opteed_fast
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0xa00000
INFO: SPSR = 0x3c9
U-Boot 2024.10 (Oct 13 2024 - 22:28:50 +0200)
Model: Radxa ZERO 3W
DRAM: 8 GiB (effective 7.7 GiB)
PMIC: RK817 (on=0x40, off=0x00)
Core: 299 devices, 28 uclasses, devicetree: separate
MMC: mmc@fe2b0000: 1, mmc@fe2c0000: 2, mmc@fe310000: 0
Loading Environment from nowhere... OK
In: serial@fe660000
Out: serial@fe660000
Err: serial@fe660000
Model: Radxa ZERO 3W
Net: No ethernet found.
Hit any key to stop autoboot: 0
Scanning for bootflows in all bootdevs
Seq Method State Uclass Part Name Filename
--- ----------- ------ -------- ---- ------------------------ ----------------
Scanning global bootmeth 'efi_mgr':
Card did not respond to voltage select! : -110
0 efi_mgr ready (none) 0 <NULL>
** Booting bootflow '<NULL>' with efi_mgr
Loading Boot0000 'mmc 1' failed
Booting: mmc 0
disks: sd0* sd1
>> OpenBSD/arm64 BOOTAA64 1.20
boot>
NOTE: random seed is being reused.
booting sd0a:/bsd: 11551956+2774712+303352+841088 [927682+91+1307976+809614]=0x13ff178
[ using 3046144 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2024 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.6 (GENERIC.MP) #196: Mon Sep 30 09:44:40 MDT 2024
[_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem = 8317743104 (7932MB)
avail mem = 7976222720 (7606MB)
random: good seed from bootblocks
mainbus0 at root: Radxa ZERO 3W
psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND
efi0 at mainbus0: UEFI 2.10
efi0: Das U-Boot rev 0x20241000
smbios0 at efi0: SMBIOS 3.7.0
smbios0: vendor U-Boot version "2024.10" date 10/01/2024
smbios0: radxa Radxa ZERO 3W
cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0
cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
cpu0: DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,AdvSIMD+HP,FP+HP,SSBS
cpu1 at mainbus0 mpidr 100: ARM Cortex-A55 r2p0
cpu1: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu1: 512KB 64b/line 16-way L2 cache
cpu2 at mainbus0 mpidr 200: ARM Cortex-A55 r2p0
cpu2: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu2: 512KB 64b/line 16-way L2 cache
cpu3 at mainbus0 mpidr 300: ARM Cortex-A55 r2p0
cpu3: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu3: 512KB 64b/line 16-way L2 cache
scmi0 at mainbus0: SCMI 2.0
apm0 at mainbus0
agintc0 at mainbus0 mbi shift 4:4 nirq 352 nredist 4 ipi: 0, 1, 2: "interrupt-controller"
syscon0 at mainbus0: "syscon"
rkiovd0 at syscon0
syscon1 at mainbus0: "syscon"
syscon2 at mainbus0: "syscon"
syscon3 at mainbus0: "syscon"
syscon4 at mainbus0: "syscon"
syscon5 at mainbus0: "syscon"
syscon6 at mainbus0: "syscon"
rkclock0 at mainbus0: PMUCRU
rkclock1 at mainbus0: CRU
syscon7 at mainbus0: "power-management"
"power-controller" at syscon7 not configured
syscon8 at mainbus0: "qos"
syscon9 at mainbus0: "qos"
syscon10 at mainbus0: "qos"
syscon11 at mainbus0: "qos"
syscon12 at mainbus0: "qos"
syscon13 at mainbus0: "qos"
syscon14 at mainbus0: "qos"
syscon15 at mainbus0: "qos"
syscon16 at mainbus0: "qos"
syscon17 at mainbus0: "qos"
syscon18 at mainbus0: "qos"
syscon19 at mainbus0: "qos"
syscon20 at mainbus0: "qos"
syscon21 at mainbus0: "qos"
syscon22 at mainbus0: "qos"
syscon23 at mainbus0: "qos"
syscon24 at mainbus0: "qos"
syscon25 at mainbus0: "qos"
syscon26 at mainbus0: "qos"
syscon27 at mainbus0: "qos"
syscon28 at mainbus0: "qos"
syscon29 at mainbus0: "qos"
syscon30 at mainbus0: "qos"
syscon31 at mainbus0: "qos"
rkcomphy0 at mainbus0
rkusbphy0 at mainbus0: phy 0
rkpinctrl0 at mainbus0: "pinctrl"
rkgpio0 at rkpinctrl0
rkgpio1 at rkpinctrl0
rkgpio2 at rkpinctrl0
rkgpio3 at rkpinctrl0
rkgpio4 at rkpinctrl0
"fit-images" at mainbus0 not configured
"l3-cache" at mainbus0 not configured
"opp-table-0" at mainbus0 not configured
rkdrm0 at mainbus0
drm0 at rkdrm0
"firmware" at mainbus0 not configured
"opp-table-1" at mainbus0 not configured
simpleaudio0 at mainbus0
"pmu" at mainbus0 not configured
agtimer0 at mainbus0: 24000 kHz
"xin24m" at mainbus0 not configured
"xin32k" at mainbus0 not configured
"sram" at mainbus0 not configured
xhci0 at mainbus0, xHCI 1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00 addr 1
xhci1 at mainbus0, xHCI 1.10
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00 addr 1
rkiic0 at mainbus0
iic0 at rkiic0
rkpmic0 at iic0 addr 0x20: RK817
"rockchip,rk8600" at iic0 addr 0x40 not configured
"gpu" at mainbus0 not configured
"video-codec" at mainbus0 not configured
"iommu" at mainbus0 not configured
"rga" at mainbus0 not configured
"video-codec" at mainbus0 not configured
"iommu" at mainbus0 not configured
"vop" at mainbus0 not configured
"iommu" at mainbus0 not configured
"hdmi" at mainbus0 not configured
"dfi" at mainbus0 not configured
dwmmc0 at mainbus0: 50 MHz base clock
sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma
dwmmc1 at mainbus0: 50 MHz base clock
sdmmc1 at dwmmc1: 4-bit, sd high-speed, dma
dwmshc0 at mainbus0
dwmshc0: SDHC 4.20, 200 MHz base clock
sdmmc2 at dwmshc0: 8-bit, sd high-speed, mmc high-speed, dma
"i2s" at mainbus0 not configured
"dma-controller" at mainbus0 not configured
"dma-controller" at mainbus0 not configured
"watchdog" at mainbus0 not configured
com0 at mainbus0: dw16550, 64 byte fifo
com1 at mainbus0: dw16550, 64 byte fifo
com1: console
rktemp0 at mainbus0
"saradc" at mainbus0 not configured
"hdmi-con" at mainbus0 not configured
gpioleds0 at mainbus0: "heartbeat"
"regulator-1v8-vcc" at mainbus0 not configured
"regulator-1v8-vcca" at mainbus0 not configured
"regulator-1v8-vcca-image" at mainbus0 not configured
"regulator-3v3-vcc" at mainbus0 not configured
"regulator-5v0-vcc-sys" at mainbus0 not configured
"sdio-pwrseq" at mainbus0 not configured
"binman" at mainbus0 not configured
"dmc" at mainbus0 not configured
rkrng0 at mainbus0: ver 2
"nvmem" at mainbus0 not configured
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, NCard, 0010> removable
sd0: 14910MB, 512 bytes/sector, 30535680 sectors
manufacturer 0xc8a1, product 0x0082 at sdmmc1 function 1 not configured
manufacturer 0xc8a1, product 0x0082 at sdmmc1 function 2 not configured
scsibus1 at sdmmc2: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Samsung, CUTB42, 0000>
sd1: 59640MB, 512 bytes/sector, 122142720 sectors
urtwn0 at uhub1 port 1 configuration 1 interface 0 "Realtek 802.11n NIC" rev 2.10/2.00 addr 2
urtwn0: MAC/BB RTL8192EU, RF 6052 2T2R, address MY:MA:CA:DD:RE:SS
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd1a (71145d0eb4e96dcc.a) swap on sd1b dump on sd1b
WARNING: bad clock chip time
WARNING: CHECK AND RESET THE DATE!
cpu0: regulator not implemented
rkdrm0: no display interface ports configured
Automatic boot in progress: starting file system checks.
/dev/sd1a (71145d0eb4e96dcc.a): file system is clean; not checking
/dev/sd1l (71145d0eb4e96dcc.l): file system is clean; not checking
/dev/sd1d (71145d0eb4e96dcc.d): file system is clean; not checking
/dev/sd1f (71145d0eb4e96dcc.f): file system is clean; not checking
/dev/sd1g (71145d0eb4e96dcc.g): file system is clean; not checking
/dev/sd1h (71145d0eb4e96dcc.h): file system is clean; not checking
/dev/sd1k (71145d0eb4e96dcc.k): file system is clean; not checking
/dev/sd1j (71145d0eb4e96dcc.j): file system is clean; not checking
/dev/sd1e (71145d0eb4e96dcc.e): file system is clean; not checking
pf enabled
starting network
reordering: ld.so libc libcrypto sshd sshd-session ssh-agent.
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
starting local daemons: cron.
Mon Oct 14 12:10:37 CEST 2024
OpenBSD/arm64 (zero.my.domain) (console)
login: