Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-10-15 04:49:13
From: rvp
Description: NetBSD/amd64 on CHUWI CoreBook
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.99.12 (GENERIC) #0: Mon Oct 14 12:26:28 UTC 2024
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 7962 MB
avail memory = 7668 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
i915drmkms* disabled
RTC BIOS diagnostic error 0xf<fixed_disk,invalid_time>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa 43e6d018
mainbus0 (root)
ACPI: RSDP 0x000000004310F014 000024 (v02 ALASKA)
ACPI: XSDT 0x000000004310E728 0000F4 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: FACP 0x0000000043103000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000430CA000 038A9D (v02 ALASKA A M I 01072009 INTL 20180927)
ACPI: FACS 0x000000004355D000 000040
ACPI: MCFG 0x000000004310D000 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x0000000043106000 006F1F (v02 INTEL DptfTabl 00001000 INTL 20180927)
ACPI: SSDT 0x0000000043104000 001B61 (v02 CpuRef CpuSsdt 00003000 INTL 20180927)
ACPI: FPDT 0x00000000430C9000 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000430C8000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MSDM 0x00000000430C7000 000055 (v03 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x00000000430C3000 0033E3 (v02 SaSsdt SaSsdt 00003000 INTL 20180927)
ACPI: SSDT 0x00000000430B7000 00B27A (v02 INTEL TcssSsdt 00001000 INTL 20180927)
ACPI: HPET 0x00000000430B6000 000038 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x00000000430B2000 0034BA (v02 ALASKA U_Rvp 00001000 INTL 20180927)
ACPI: SSDT 0x00000000430B1000 000E74 (v02 ALASKA Ther_Rvp 00001000 INTL 20180927)
ACPI: SSDT 0x00000000430B0000 000C0D (v02 INTEL xh_icud4 00000000 INTL 20180927)
ACPI: NHLT 0x00000000430AF000 00002D (v00 ALASKA A M I 01072009 AMI 01000013)
ACPI: LPIT 0x00000000430AE000 000094 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x00000000430AA000 002720 (v02 ALASKA PtidDevc 00001000 INTL 20180927)
ACPI: SSDT 0x00000000430A9000 000FBB (v02 ALASKA TbtTypeC 00000000 INTL 20180927)
ACPI: DBGP 0x00000000430A8000 000034 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: DBG2 0x00000000430A7000 000054 (v00 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x00000000430A5000 0015F3 (v02 ALASKA UsbCTabl 00001000 INTL 20180927)
ACPI: SSDT 0x00000000430A3000 000144 (v02 Intel ADebTabl 00001000 INTL 20180927)
ACPI: BGRT 0x00000000430A2000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: TPM2 0x00000000430A1000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
ACPI: DMAR 0x00000000430A4000 0000B0 (v02 INTEL EDK2 00000002 01000013)
ACPI: WSMT 0x00000000430AD000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: APIC 0x00000000430A0000 000084 (v04 ALASKA A M I 01072009 AMI 00010013)
Firmware Error (ACPI): Could not resolve symbol [\_SB.PCI0.I2C1.TPL1], AE_NOT_FOUND (20240827/dswload2-206)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20240827/psobject-264)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
ACPI: 12 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: CPU base freq 1200000000 Hz
cpu0: CPU max freq 3400000000 Hz
cpu0: TSC freq CPUID 1190400000 Hz
cpu0: Intel(R) Core(TM) i3-1005G1 CPU @ 1.20GHz, id 0x706e5
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i3-1005G1 CPU @ 1.20GHz, id 0x706e5
cpu1: node 0, package 0, core 1, smt 0
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Core(TM) i3-1005G1 CPU @ 1.20GHz, id 0x706e5
cpu2: node 0, package 0, core 0, smt 1
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) i3-1005G1 CPU @ 1.20GHz, id 0x706e5
cpu3: node 0, package 0, core 1, smt 1
acpi0 at mainbus0: Intel ACPICA 20240827
acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI ,01000013>
ACPI Error: No handler for Region [ECF2] (0xffff825daa92a4c8) [EmbeddedControl] (20240827/evregion-184)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20240827/exfldio-320)
ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.BAT0._STA due to previous error (AE_NOT_EXIST) (20240827/psparse-580)
ACPI Error: No handler for Region [ECF2] (0xffff825daa92a4c8) [EmbeddedControl] (20240827/evregion-184)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20240827/exfldio-320)
ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC.LID0._STA due to previous error (AE_NOT_EXIST) (20240827/psparse-580)
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000c0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF825DAC204488 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20180927)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF825DAAC0C2C8 000371 (v02 PmRef Cpu0Ist 00003000 INTL 20180927)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF825C0C737648 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20180927)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF825C0C808008 0005FC (v02 PmRef ApIst 00003000 INTL 20180927)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF825C0C7EB008 000AB0 (v02 PmRef ApPsd 00003000 INTL 20180927)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF825DAAC0C708 00030A (v02 PmRef ApCst 00003000 INTL 20180927)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 19200000 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1): io 0x62,0x66
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
acpiout15: brightness levels: [0-100]
acpiout16 at acpivga0 (IPUA, 0x3480): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout15): Unknown Output Device, head 0
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
CIND (INT33D3) at acpi0 not configured
SEN2 (INT3403) at acpi0 not configured
SEN3 (INT3403) at acpi0 not configured
SEN4 (INT3403) at acpi0 not configured
TPD0 (SYNA3602) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303-0) (kbd port): io 0x60,0x64 irq 1
AWAC (ACPI000E) at acpi0 not configured
igpio0 at acpi0 (GPI0, INT3455): mem 0xfd6e0000-0xfd6effff,0xfd6d0000-0xfd6dffff,0xfd6a0000-0xfd6affff,0xfd690000-0xfd69ffff irq 14
gpio0 at igpio0: 241 pins
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpiwmi0 at acpi0 (WFDE, PNP0C14-SampleDev): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpiwmi1 at acpi0 (WFTE, PNP0C14-TestDev): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
PEPD (INT33A1) at acpi0 not configured
acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
HIDD (INT33D5) at acpi0 not configured
TPM (MSFT0101) at acpi0 not configured
IETM (INT3400) at acpi0 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: levels: passive cooling
ACPI: Enabled 4 GPEs in block 00 to 7F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel product 8a02 (rev. 0x03)
genfb0 at pci0 dev 2 function 0: Intel product 8a56 (rev. 0x07)
genfb0: framebuffer at 0x4000000000, size 1920x1200, depth 32, stride 7680
genfb0: shadow framebuffer enabled, size 9000 KB
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
Intel product 8a03 (miscellaneous DASP, revision 0x03) at pci0 dev 4 function 0 not configured
xhci0 at pci0 dev 13 function 0: Intel product 8a13 (rev. 0x03)
xhci0: 64-bit DMA
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.10
usb0 at xhci0: USB revision 3.1
usb1 at xhci0: USB revision 2.0
xhci1 at pci0 dev 20 function 0: Intel 495 Series USB 3.2 Gen 2x1 xHCI (rev. 0x30)
xhci1: 64-bit DMA
xhci1: interrupting at msi1 vec 0
xhci1: xHCI version 1.10
usb2 at xhci1: USB revision 3.1
usb3 at xhci1: USB revision 2.0
Intel 495 Series Shared SRAM (RAM memory, revision 0x30) at pci0 dev 20 function 2 not configured
Intel product 34f0 (miscellaneous network, revision 0x30) at pci0 dev 20 function 3 not configured
sdhc0 at pci0 dev 20 function 5: Intel 495 Series SDXC (rev. 0x30)
sdhc0: interrupting at ioapic0 pin 19
sdhc0: SDHC 3.0, rev 16, caps <3568c881/00000807>, 32-bit ADMA2, 200000 kHz, HS SDR50 DDR50 SDR104 HS200 1.8V 3.3V, re-tuning mode 1 (128s timer), 512 byte blocks
sdmmc0 at sdhc0 slot 0
dwiic0 at pci0 dev 21 function 0autoconfiguration error: : can't map register space
dwiic1 at pci0 dev 21 function 1autoconfiguration error: : can't map register space
dwiic2 at pci0 dev 21 function 2autoconfiguration error: : can't map register space
dwiic3 at pci0 dev 21 function 3autoconfiguration error: : can't map register space
Intel 495 Series HECI 1 (miscellaneous communications, revision 0x30) at pci0 dev 22 function 0 not configured
dwiic4 at pci0 dev 25 function 0autoconfiguration error: : can't map register space
dwiic5 at pci0 dev 25 function 1autoconfiguration error: : can't map register space
sdhc1 at pci0 dev 26 function 0: Intel 495 Series eMMC (rev. 0x30)
sdhc1: interrupting at ioapic0 pin 16
sdhc1: SDHC 3.0, rev 16, caps <546ec881/80000807>, 32-bit ADMA2, 200000 kHz, embedded slot, HS SDR50 DDR50 SDR104 HS200 1.8V, re-tuning mode 1 (128s timer), 2048 byte blocks
sdmmc1 at sdhc1 slot 0
ppb0 at pci0 dev 29 function 0: Intel 495 Series PCIe Root Port 13 (rev. 0x30)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 8.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
nvme0 at pci1 dev 0 function 0: Silicon Motion product 2263 (rev. 0x03)
nvme0: NVMe 1.3
nvme0: for admin queue interrupting at msix2 vec 0
nvme0: AirDisk 512GB SSD, firmware V0808A0, serial NJ6012R007902P70GX
nvme0: for io queue 1 interrupting at msix2 vec 1 affinity to cpu0
nvme0: for io queue 2 interrupting at msix2 vec 2 affinity to cpu1
nvme0: for io queue 3 interrupting at msix2 vec 3 affinity to cpu2
nvme0: for io queue 4 interrupting at msix2 vec 4 affinity to cpu3
ld0 at nvme0 nsid 1
ld0: 476 GB, 62260 cyl, 255 head, 63 sec, 512 bytes/sect x 1000215216 sectors
Intel 495 Series UART 0 (miscellaneous communications, revision 0x30) at pci0 dev 30 function 0 not configured
Intel 495 Series GSPI 1 (miscellaneous serial bus, revision 0x30) at pci0 dev 30 function 3 not configured
pcib0 at pci0 dev 31 function 0: Intel 495 Series U Premium eSPI (rev. 0x30)
hdaudio0 at pci0 dev 31 function 3: HD Audio Controller
hdaudio0: interrupting at msi3 vec 0
hdaudio0: HDA ver. 1.0, OSS 9, ISS 7, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: Realtek ALC269
hdafg0: DAC00 2ch: Speaker [Built-In]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: ADC03 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
hdafg1 at hdaudio0: Intel HDMI/DP
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
audio1 at hdafg1: playback, capture, full duplex, independent
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr1 at audio1: PC Speaker (synthesized)
wsbell at spkr1 not configured
ichsmb0 at pci0 dev 31 function 4: Intel 495 Series SMBus (rev. 0x30)
ichsmb0: interrupting at ioapic0 pin 16
iic0 at ichsmb0: I2C bus
Intel 495 Series SPI (FLASH) (miscellaneous serial bus, revision 0x30) at pci0 dev 31 function 5 not configured
isa0 at pcib0
pcppi0 at isa0 port 0x61
spkr2 at pcppi0: PC Speaker
wsbell at spkr2 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 253 us, pow 200 mW
acpicpu0: C3: FFH, lat 1048 us, pow 200 mW
acpicpu0: P0: FFH, lat 10 us, pow 15000 mW, 1201 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 15000 mW, 1200 MHz
acpicpu0: P2: FFH, lat 10 us, pow 13494 mW, 1100 MHz
acpicpu0: P3: FFH, lat 10 us, pow 12167 mW, 1000 MHz
acpicpu0: P4: FFH, lat 10 us, pow 10868 mW, 900 MHz
acpicpu0: P5: FFH, lat 10 us, pow 9453 mW, 800 MHz
acpicpu0: P6: FFH, lat 10 us, pow 8211 mW, 700 MHz
acpicpu0: P7: FFH, lat 10 us, pow 6997 mW, 600 MHz
acpicpu0: P8: FFH, lat 10 us, pow 5670 mW, 500 MHz
acpicpu0: P9: FFH, lat 10 us, pow 4509 mW, 400 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
cpu0: CPU base freq 1200000000 Hz
cpu0: CPU max freq 3400000000 Hz
cpu0: TSC freq CPUID 1190400000 Hz
cpu0: TSC freq calibrated 1190402000 Hz
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1190402000 Hz quality 3000
uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 1 port with 1 removable, self powered
uhub2 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
uhub2: 6 ports with 6 removable, self powered
uhub3 at usb3: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
uhub3: 12 ports with 12 removable, self powered
ld0: GPT GUID: ee308ad1-5648-4402-91ce-3d85c5620a65
dk0 at ld0: "EFI system part", 204800 blocks at 2048, type: msdos
dk1 at ld0: "Microsoft reserved partition", 32768 blocks at 206848, type: <unknown>
dk2 at ld0: "Basic data partition", 2048000 blocks at 239616, type: <unknown>
dk3 at ld0: "ebc11ed5-5bac-46c8-a102-885285e6d3a1", 195407872 blocks at 2287616, type: ntfs
autoconfiguration error: ld0: wedge named 'Basic data partition' already existed, using 'ebc11ed5-5bac-46c8-a102-885285e6d3a1'
dk4 at ld0: "Ubuntu", 102400000 blocks at 197697536, type: ext2fs
dk5 at ld0: "FreeBSD-EFI", 20480 blocks at 300097536, type: msdos
dk6 at ld0: "FreeBSD-14.1", 104857600 blocks at 300118016, type: ffs
dk7 at ld0: "FreeBSD-swap", 16777216 blocks at 404975616, type: swap
dk8 at ld0: "NetBSD-EFI", 20480 blocks at 421754880, type: msdos
dk9 at ld0: "NetBSD-Main", 102400000 blocks at 421777408, type: ffs
dk10 at ld0: "NetBSD-swap", 16384000 blocks at 524179456, type: swap
dk11 at ld0: "Linux filesystem", 20971520 blocks at 540563456, type: ext2fs
dk12 at ld0: "OpenBSD-EFI", 20480 blocks at 561534976, type: msdos
dk13 at ld0: "OpenBSD-7.5", 104857600 blocks at 561555456, type: <unknown>
IPsec: Initialized Security Association Processing.
acpiacad0: AC adapter online.
sdmmc1: autoconfiguration error: couldn't enable card: 60
acpibat0: autoconfiguration error: failed to evaluate _BIF: AE_LIMIT
sdmmc1: autoconfiguration error: couldn't enable card: 60
ure0 at uhub2 port 1
ure0: TP-LINK (0x2357) USB 10/100/1000 LAN (0x0601), rev 3.00/30.00, addr 1
ure0: RTL8153 ver 5c20
uvideo0 at uhub3 port 3 configuration 1 interface 0: HYGD-230213-A (0x0c45) Hy-HD(7501)-Camera (0x64ab), rev 2.01/2.13, addr 2
video0 at uvideo0: HYGD-230213-A (0x0c45) Hy-HD(7501)-Camera (0x64ab), rev 2.01/2.13, addr 2
rgephy0 at ure0 phy 0: RTL8251 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ure0: Ethernet address [_MAC_XXXXXXXXXX]
uhub4 at uhub3 port 5: vendor 05e3 (0x05e3) USB2.0 Hub (0x0608), class 9/0, rev 2.00/77.64, addr 3
uhub4: single transaction translator
uhub4: 4 ports with 4 removable, self powered
uhidev0 at uhub4 port 1 configuration 1 interface 0
uhidev0: Logitech (0x046d) USB-PS/2 Optical Mouse (0xc03d), rev 2.00/20.00, addr 4, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub4 port 2 configuration 1 interface 0
uhidev1: Usb KeyBoard (0xc0f4) Usb KeyBoard (0x01f5), rev 1.10/1.10, addr 5, iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub4 port 2 configuration 1 interface 1
uhidev2: Usb KeyBoard (0xc0f4) Usb KeyBoard (0x01f5), rev 1.10/1.10, addr 5, iclass 3/0
uhidev2: 2 report ids
uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
ubt0 at uhub3 port 10
ubt0: vendor 8087 (0x8087) product 0026 (0x0026), rev 2.01/0.02, addr 6
swwdog0: software watchdog initialized
WARNING: 10 errors while detecting hardware; check system log.
boot device: ld0
root on dk9 dumps on dk7
root file system type: ffs
kern.module.path=/stand/amd64/10.99.12/modules
tap0: Ethernet address [_MAC_XXXXXXXXXX]
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)