Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-10-21 16:38:50
From: Mischa
Description: OpenBSD 7.6 on Seeed Mini Router (ARM Cortex-A72 r0p3)
OpenBSD 7.6 (GENERIC.MP) #196: Mon Sep 30 09:44:40 MDT 2024 [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/arm64/compile/GENERIC.MP real mem = 4124938240 (3933MB) avail mem = 3956867072 (3773MB) random: good seed from bootblocks mainbus0 at root: Raspberry Pi Compute Module 4 Rev 1.0 efi0 at mainbus0: UEFI 2.8 efi0: Das U-Boot rev 0x20211000 smbios0 at efi0: SMBIOS 3.0 smbios0: vendor U-Boot version "2021.10" date 10/01/2021 smbios0: Unknown Unknown Product cpu0 at mainbus0 mpidr 0: ARM Cortex-A72 r0p3 cpu0: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache cpu0: 1024KB 64b/line 16-way L2 cache cpu0: CRC32,ASID16 cpu1 at mainbus0 mpidr 1: ARM Cortex-A72 r0p3 cpu1: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache cpu1: 1024KB 64b/line 16-way L2 cache cpu2 at mainbus0 mpidr 2: ARM Cortex-A72 r0p3 cpu2: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache cpu2: 1024KB 64b/line 16-way L2 cache cpu3 at mainbus0 mpidr 3: ARM Cortex-A72 r0p3 cpu3: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache cpu3: 1024KB 64b/line 16-way L2 cache "linux,cma" at mainbus0 not configured apm0 at mainbus0 "system" at mainbus0 not configured "axi" at mainbus0 not configured simplebus0 at mainbus0: "soc" bcmclock0 at simplebus0 bcmmbox0 at simplebus0 bcmgpio0 at simplebus0 bcmaux0 at simplebus0 ampintc0 at simplebus0 nirq 256, ncpu 4 ipi: 0, 1, 2: "interrupt-controller" bcmtmon0 at simplebus0 bcmdmac0 at simplebus0: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA9 DMA10 "timer" at simplebus0 not configured pluart0 at simplebus0: rev 2, 16 byte fifo pluart0: console "local_intc" at simplebus0 not configured bcmdog0 at simplebus0 bcmirng0 at simplebus0 "firmware" at simplebus0 not configured "power" at simplebus0 not configured "mailbox" at simplebus0 not configured sdhc0 at simplebus0 sdhc0: SDHC 3.00, 250 MHz base clock sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed "gpiomem" at simplebus0 not configured "fb" at simplebus0 not configured "vcsm" at simplebus0 not configured "clocks" at mainbus0 not configured "phy" at mainbus0 not configured "clk-27M" at mainbus0 not configured "clk-108M" at mainbus0 not configured simplebus1 at mainbus0: "emmc2bus" sdhc1 at simplebus1 sdhc1: SDHC 3.00, 100 MHz base clock sdmmc1 at sdhc1: 8-bit, sd high-speed, mmc high-speed, ddr52, dma "arm-pmu" at mainbus0 not configured agtimer0 at mainbus0: 54000 kHz simplebus2 at mainbus0: "scb" bcmpcie0 at simplebus2: "pcie" pci0 at bcmpcie0 ppb0 at pci0 dev 0 function 0 "Broadcom BCM2711" rev 0x20 pci1 at ppb0 bus 1 xhci0 at pci1 dev 0 function 0 "VIA VL805 xHCI" rev 0x01: intx, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "VIA xHCI root hub" rev 3.00/1.00 addr 1 bse0 at simplebus2: address [_MAC_XXXXXXXXXX] brgphy0 at bse0 phy 0: BCM54210E, rev. 2 "dma" at simplebus2 not configured "hevc-decoder" at simplebus2 not configured "rpivid-local-intc" at simplebus2 not configured "h264-decoder" at simplebus2 not configured "vp9-decoder" at simplebus2 not configured gpioleds0 at mainbus0: "led0", "led1" "sd_io_1v8_reg" at mainbus0 not configured "sd_vcc_reg" at mainbus0 not configured "fixedregulator_3v3" at mainbus0 not configured "fixedregulator_5v0" at mainbus0 not configured simplebus3 at mainbus0: "v3dbus" scsibus0 at sdmmc1: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: <Samsung, BJTD4R, 0000> removable sd0: 29820MB, 512 bytes/sector, 61071360 sectors uhub1 at uhub0 port 1 configuration 1 interface 0 "VIA Labs USB2.0 Hub" rev 2.10/4.20 addr 2 bwfm0 at sdmmc0 function 1 manufacturer 0x02d0, product 0xa9a6 at sdmmc0 function 2 not configured manufacturer 0x02d0, product 0xa9a6 at sdmmc0 function 3 not configured mue0 at uhub0 port 4 configuration 1 interface 0 "Microchip LAN7800" rev 3.10/3.00 addr 3 mue0: LAN7800, address [_MAC_XXXXXXXXXX] ukphy0 at mue0 phy 1: Generic IEEE 802.3u media interface, rev. 2: OUI 0x0001f0, model 0x0013 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (edb787d024013035.a) swap on sd0b dump on sd0b WARNING: CHECK AND RESET THE DATE! gpio0 at bcmgpio0: 58 pins "bootloader" at mainbus0 not configured bwfm0: failed loadfirmware of file brcmfmac43455-sdio.raspberrypi,4-compute-module.txt