Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-10-26 16:03:41
From: skrll
Description: NetBSD/riscv on StarFive VisionFive 2
[ 1.000000] Loaded initial symtab at 0xffffffc00085c058, strtab at 0xffffffc0008e7a98, # entries 23807 [ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.99.12 (GENERIC64) #236: Sat Oct 26 14:34:38 BST 2024 [ 1.000000] nick@thinkbook:/home/nick/netbsd/nick-riscv/obj.riscv64/sys/arch/riscv/compile/GENERIC64 [ 1.000000] total memory = 8179 MB [ 1.000000] avail memory = 7913 MB [ 1.000000] entropy: ready [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] mainbus0 (root) [ 1.000000] simplebus0 at mainbus0: StarFive VisionFive 2 v1.3B [ 1.000000] simplebus1 at simplebus0 [ 1.000000] cpus0 at simplebus0 [ 1.000000] simplebus2 at simplebus0 [ 1.000000] cpu0 at cpus0: SiFive 7-Series Processor (E7, S7, U7 series) imp. 4210427 [ 1.000000] cpu0: vendor 0x489 arch. 8000000000000007 imp. 4210427 [ 1.000000] cpu1 at cpus0: SiFive 7-Series Processor (E7, S7, U7 series) imp. 4210427 [ 1.000000] cpu1: vendor 0x489 arch. 8000000000000007 imp. 4210427 [ 1.000000] cpu2 at cpus0: SiFive 7-Series Processor (E7, S7, U7 series) imp. 4210427 [ 1.000000] cpu2: vendor 0x489 arch. 8000000000000007 imp. 4210427 [ 1.000000] cpu3 at cpus0: SiFive 7-Series Processor (E7, S7, U7 series) imp. 4210427 [ 1.000000] cpu3: vendor 0x489 arch. 8000000000000007 imp. 4210427 [ 1.000000] intc0 at cpu0: local interrupt controller [ 1.000000] intc1 at cpu1: local interrupt controller [ 1.000000] intc2 at cpu2: local interrupt controller [ 1.000000] intc3 at cpu3: local interrupt controller [ 1.000000] fclock0 at simplebus0: 49152000 Hz fixed clock (tdm_ext) [ 1.000000] fclock1 at simplebus0: 12288000 Hz fixed clock (mclk_ext) [ 1.000000] fclock2 at simplebus0: 12288000 Hz fixed clock (i2srx_bclk_ext) [ 1.000000] fclock3 at simplebus0: 192000 Hz fixed clock (i2srx_lrck_ext) [ 1.000000] syscon0 at simplebus1: System Controller Registers [ 1.000000] syscon1 at simplebus1: System Controller Registers [ 1.000000] fclock4 at simplebus0: 24000000 Hz fixed clock (osc) [ 1.000000] fclock5 at simplebus0: 12288000 Hz fixed clock (i2stx_bclk_ext) [ 1.000000] fclock6 at simplebus0: 192000 Hz fixed clock (i2stx_lrck_ext) [ 1.000000] fclock7 at simplebus0: 50000000 Hz fixed clock (gmac1_rmii_refin) [ 1.000000] fclock8 at simplebus0: 125000000 Hz fixed clock (gmac1_rgmii_rxin) [ 1.000000] syscon2 at simplebus1: System Controller Registers [ 1.000000] fclock9 at simplebus0: 50000000 Hz fixed clock (gmac0_rmii_refin) [ 1.000000] fclock10 at simplebus0: 125000000 Hz fixed clock (gmac0_rgmii_rxin) [ 1.000000] fclock11 at simplebus0: 32768 Hz fixed clock (rtc_osc) [ 1.000000] fclock12 at simplebus0: 74250000 Hz fixed clock (dvp_clk) [ 1.000000] fclock13 at simplebus0: 297000000 Hz fixed clock (hdmitx0_pixelclk) [ 1.000000] jh7110clkc0 at simplebus1: JH7110 System Clock and Reset Generator [ 1.000000] plic0 at simplebus1 [ 1.000000] plic0: inactive HART for PLIC for context 0 [ 1.000000] plic0: interrupt cpu1/Machine external #11 handler installed [ 1.000000] plic0: interrupt cpu1/Supervisor external #9 handler installed [ 1.000000] plic0: hart 1 context 2 [ 1.000000] plic0: interrupt cpu2/Machine external #11 handler installed [ 1.000000] plic0: interrupt cpu2/Supervisor external #9 handler installed [ 1.000000] plic0: hart 2 context 4 [ 1.000000] plic0: interrupt cpu3/Machine external #11 handler installed [ 1.000000] plic0: interrupt cpu3/Supervisor external #9 handler installed [ 1.000000] plic0: hart 3 context 6 [ 1.000000] plic0: interrupt cpu4/Machine external #11 handler installed [ 1.000000] plic0: interrupt cpu4/Supervisor external #9 handler installed [ 1.000000] plic0: hart 4 context 8 [ 1.000000] plic0: attaching: RISC-V PLIC (136 IRQs) [ 1.000000] jh7110clkc1 at simplebus1: JH7110 System-Top-Group Clock and Reset Generator [ 1.000000] jh7110clkc2 at simplebus1: JH7110 Always-On Clock and Reset Generator [ 1.000000] jh7110clkc3 at simplebus1: JH7110 Image-Signal-Process Clock and Reset Generator [ 1.000000] jh7110clkc4 at simplebus1: JH7110 Video Output Clock and Reset Generator [ 1.000000] ccache0 at simplebus1: L2 cache controller. 2048 KiB/64B 16-way (2048 set). [ 1.000000] ccache0: No. of banks 8 [ 1.000000] ccache0: No. of ways per bank 16 [ 1.000000] ccache0: Sets per bank 256 [ 1.000000] ccache0: Bytes per cache block 64 [ 1.000000] ccache0: Largest way enabled 15 [ 1.000000] /opp-table-0 at simplebus0 not configured [ 1.000000] /soc/i2c@12050000 at simplebus1 not configured [ 1.000000] /soc/temperature-sensor@120e0000 at simplebus1 not configured [ 1.000000] /soc/pinctrl@13040000 at simplebus1 not configured [ 1.000000] /soc/dma-controller@16050000 at simplebus1 not configured [ 1.000000] /soc/phy@10200000 at simplebus1 not configured [ 1.000000] /soc/syscon@13030000/clock-controller at syscon0 not configured [ 1.000000] /soc/dma-controller@16008000 at simplebus1 not configured [ 1.000000] eqos0 at simplebus1clk: set gmac0_tx parent to gmac0_rmii_rtx [ 1.000000] : DesignWare EQOS ver 0x52 (0x41) [ 1.000000] eqos0: hw features 1a2173f7 09845904 01000000 00000000 [ 1.000000] eqos0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] mcommphy0 at eqos0 phy 0: Motorcomm YT8531 GbE PHY [ 1.000000] mcommphy0: motorcomm,tx-clk-adj-enabled is true [ 1.000000] mcommphy0: motorcomm,tx-clk-100-inverted is true [ 1.000000] mcommphy0: motorcomm,tx-clk-1000-inverted is true [ 1.000000] mcommphy0: rx-clk-drv-microamp is 3970 [ 1.000000] mcommphy0: motorcomm,rx-data-drv-microamp is 2910 [ 1.000000] mcommphy0: rx-internal-delay-ps is 1500 [ 1.000000] mcommphy0: tx-internal-delay-ps is 1500 [ 1.000000] mcommphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 1.000000] eqos0: interrupting on plic0 irq 7 [ 1.000000] eqos1 at simplebus1clk: set gmac1_tx parent to gmac1_rmii_rtx [ 1.000000] : DesignWare EQOS ver 0x52 (0x41) [ 1.000000] eqos1: hw features 1a2173f7 09845904 01000000 00000000 [ 1.000000] eqos1: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] mcommphy1 at eqos1 phy 0: Motorcomm YT8531 GbE PHY [ 1.000000] mcommphy1: motorcomm,tx-clk-adj-enabled is true [ 1.000000] mcommphy1: motorcomm,tx-clk-100-inverted is true [ 1.000000] mcommphy1: rx-clk-drv-microamp is 3970 [ 1.000000] mcommphy1: motorcomm,rx-data-drv-microamp is 2910 [ 1.000000] mcommphy1: rx-internal-delay-ps is 300 [ 1.000000] mcommphy1: tx-internal-delay-ps is 0 [ 1.000000] mcommphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 1.000000] eqos1: interrupting on plic0 irq 78 [ 1.000000] /soc/phy@19820000 at simplebus1 not configured [ 1.000000] /soc/isp@19840000 at simplebus1 not configured [ 1.000000] /soc/power-controller@17030000 at simplebus1 not configured [ 1.000000] /soc/csi@19800000 at simplebus1 not configured [ 1.000000] /sound at simplebus0 not configured [ 1.000000] /soc/pwmdac@100b0000 at simplebus1 not configured [ 1.000000] /audio-codec at simplebus0 not configured [ 1.000000] /soc/timer@2000000 at simplebus1 not configured [ 1.000000] com0 at simplebus1: DesignWare APB UART, no fifo [ 1.000000] com0: console [ 1.000000] com0: interrupting on plic0 irq 32 [ 1.000000] /soc/i2c@10030000 at simplebus1 not configured [ 1.000000] /soc/i2c@10050000 at simplebus1 not configured [ 1.000000] /soc/spi@10060000 at simplebus1 not configured [ 1.000000] jh71x0usb0 at simplebus1: USB [ 1.000000] /soc/phy@10210000 at simplebus1 not configured [ 1.000000] /soc/phy@10220000 at simplebus1 not configured [ 1.000000] /soc/i2c@12060000 at simplebus1 not configured [ 1.000000] /soc/pwm@120d0000 at simplebus1 not configured [ 1.000000] /soc/spi@13010000 at simplebus1 not configured [ 1.000000] /soc/crypto@16000000 at simplebus1 not configured [ 1.000000] /soc/rng@1600c000 at simplebus1 not configured [ 1.000000] dwcmmc0 at simplebus1clk: set sdio0_sdcard rate to 50000000 Hz [ 1.000000] : DesignWare SD/MMC [ 1.000000] dwcmmc0: interrupting on plic0 irq 74 [ 1.000000] dwcmmc1 at simplebus1clk: set sdio1_sdcard rate to 50000000 Hz [ 1.000000] : DesignWare SD/MMC [ 1.000000] dwcmmc1: interrupting on plic0 irq 75 [ 1.000000] /soc/pinctrl@17020000 at simplebus1 not configured [ 1.000000] /gpio-restart at simplebus0 not configured [ 1.000000] /soc/watchdog@13070000 at simplebus1 not configured [ 1.000000] xhci0 at simplebus1autoconfiguration error: : cannot switch 'otg' mode to host [ 1.000000] /opp-table-0 at simplebus0 not configured [ 1.000000] /soc/i2c@12050000 at simplebus1 not configured [ 1.000000] /soc/temperature-sensor@120e0000 at simplebus1 not configured [ 1.000000] /soc/pinctrl@13040000 at simplebus1 not configured [ 1.000000] /soc/dma-controller@16050000 at simplebus1 not configured [ 1.000000] /soc/phy@10200000 at simplebus1 not configured [ 1.000000] /soc/syscon@13030000/clock-controller at syscon0 not configured [ 1.000000] /soc/dma-controller@16008000 at simplebus1 not configured [ 1.000000] /soc/phy@19820000 at simplebus1 not configured [ 1.000000] /soc/isp@19840000 at simplebus1 not configured [ 1.000000] /soc/power-controller@17030000 at simplebus1 not configured [ 1.000000] /soc/csi@19800000 at simplebus1 not configured [ 1.000000] /sound at simplebus0 not configured [ 1.000000] /soc/pwmdac@100b0000 at simplebus1 not configured [ 1.000000] /audio-codec at simplebus0 not configured [ 1.000000] /soc/timer@2000000 at simplebus1 not configured [ 1.000000] /soc/i2c@10030000 at simplebus1 not configured [ 1.000000] /soc/i2c@10050000 at simplebus1 not configured [ 1.000000] /soc/spi@10060000 at simplebus1 not configured [ 1.000000] /soc/phy@10210000 at simplebus1 not configured [ 1.000000] /soc/phy@10220000 at simplebus1 not configured [ 1.000000] /soc/i2c@12060000 at simplebus1 not configured [ 1.000000] /soc/pwm@120d0000 at simplebus1 not configured [ 1.000000] /soc/spi@13010000 at simplebus1 not configured [ 1.000000] /soc/crypto@16000000 at simplebus1 not configured [ 1.000000] /soc/rng@1600c000 at simplebus1 not configured [ 1.000000] /soc/pinctrl@17020000 at simplebus1 not configured [ 1.000000] /gpio-restart at simplebus0 not configured [ 1.000000] /soc/watchdog@13070000 at simplebus1 not configured [ 1.000000] timecounter: Timecounter "riscv" frequency 4000000 Hz quality 100 [ 1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.389998] cpu_boot_secondary_processors: starting secondary processors [ 1.402265] cpu_boot_secondary_processors: secondary processors hatched. 4 running [ 1.410011] sdmmc0 at dwcmmc0 [ 1.410011] sdmmc1 at dwcmmc1 [ 1.429990] IPsec: Initialized Security Association Processing. [ 1.519987] sdmmc0: autoconfiguration error: couldn't enable card: 60 [ 1.532278] sdmmc1: SD card status: 4-bit, C10, U1 [ 1.539987] ld1 at sdmmc1: <0x1b:0x534d:EB1QT:0x30:0x7aa053dd:0x134> [ 1.549986] ld1: 30528 MB, 7753 cyl, 128 head, 63 sec, 512 bytes/sect x 62521344 sectors [ 1.559994] ld1: GPT GUID: 3d3d448c-5094-4e63-9c21-e62db847e4e4 [ 1.559994] dk0 at ld1: "EFI", 163840 blocks at 32768, type: msdos [ 1.572787] dk1 at ld1: "netbsd-root", 62316544 blocks at 196608, type: ffs [ 1.579989] ld1: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 1.579989] swwdog0: software watchdog initialized [ 1.589990] WARNING: 2 errors while detecting hardware; check system log. [ 1.589990] boot device: dk1 [ 1.599987] root on dk1 [ 1.609988] mountroot: trying lfs... [ 1.609988] mountroot: trying ffs... [ 1.620278] root file system type: ffs [ 1.629988] kern.module.path=/stand/riscv/10.99.12/modules [ 1.640335] WARNING: no TOD clock present [ 1.640335] WARNING: using filesystem time [ 1.648493] WARNING: CHECK AND RESET THE DATE! [ 1.659989] init: copying out path `/sbin/init' 11