Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-11-12 04:06:20
From: karl
Description: FreeBSD/amd64 on Framework Laptop 16 (AMD Ryzen 7040 Series)
---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.2-BETA2 releng/14.2-n269480-0ff73c7796d6 GENERIC amd64 FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) VT(efifb): resolution 2560x1600 CPU: AMD Ryzen 9 7940HS w/ Radeon 780M Graphics (3992.68-MHz K8-class CPU) Origin="AuthenticAMD" Id=0xa70f41 Family=0x19 Model=0x74 Stepping=1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x7ef8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX> Structured Extended Features=0xf1bf97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,AVX512CD,SHA,AVX512BW,AVX512VL> Structured Extended Features2=0x405fde<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID> Structured Extended Features3=0x10000010<FSRM,L1DFL> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> AMD Extended Feature Extensions ID EBX=0x791ef257<CLZERO,IRPerf,XSaveErPtr,RDPRU,BE,WBNOINVD,IBPB,INT_WBINVD,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SAMEMODE_IBRS,NOLMSLE,SSBD,CPPC,PSFD,BTC_NO,IBPB_RET> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 TSC: P-state invariant, performance statistics real memory = 68717379584 (65534 MB) avail memory = 64497803264 (61509 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <INSYDE EDK2 > FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.1> irqs 0-23 ioapic1 <Version 2.1> irqs 24-55 Launching APs: 1 9 8 7 6 13 12 10 11 5 4 15 14 2 3 random: entropy device external interface kbd0 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0x58e77000-0x58e7701e smbios0: Version: 3.6, BCD Revision: 3.6 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> acpi0: <INSYDE EDK2> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 hpet0: HPET never increments, disabling device_attach: hpet0 attach returned 6 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0xb> port 0x62,0x66,0x200-0x207,0x800-0x87f,0x880-0x8ff,0xe00-0xefe,0xf00-0xffe on acpi0 isab0: <ACPI Generic ISA bridge> on acpi0 isa0: <ISA bus> on isab0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0 pci1: <ACPI PCI bus> on pcib1 nvme0: <Generic NVMe Device> mem 0x90c00000-0x90c03fff at device 0.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 2.2 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <network> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 2.4 on pci0 pci3: <ACPI PCI bus> on pcib3 nvme1: <Generic NVMe Device> mem 0x90a00000-0x90a03fff at device 0.0 on pci3 pcib4: <ACPI PCI-PCI bridge> at device 3.1 on pci0 pci0: <old, non-VGA display device> at device 3.2 (no driver attached) pci0: <old, non-VGA display device> at device 3.3 (no driver attached) pci0: <old, non-VGA display device> at device 3.4 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 4.1 on pci0 pcib6: <ACPI PCI-PCI bridge> at device 8.1 on pci0 pci4: <ACPI PCI bus> on pcib6 vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0x8800000000-0x880fffffff,0x90000000-0x901fffff,0x90500000-0x9057ffff at device 0.0 on pci4 hdac0: <ATI (0x1640) HDA Controller> mem 0x905c8000-0x905cbfff at device 0.1 on pci4 pci4: <encrypt/decrypt> at device 0.2 (no driver attached) xhci0: <XHCI (generic) USB 3.0 controller> mem 0x90200000-0x902fffff at device 0.3 on pci4 xhci0: 64 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 xhci1: <XHCI (generic) USB 3.0 controller> mem 0x90300000-0x903fffff at device 0.4 on pci4 xhci1: 64 bytes context size, 64-bit DMA usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 pci4: <multimedia> at device 0.5 (no driver attached) hdac1: <AMD Raven HDA Controller> mem 0x905c0000-0x905c7fff at device 0.6 on pci4 pcib7: <ACPI PCI-PCI bridge> at device 8.2 on pci0 pci5: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 8.3 on pci0 pci6: <ACPI PCI bus> on pcib8 xhci2: <XHCI (generic) USB 3.0 controller> mem 0x90600000-0x906fffff at device 0.3 on pci6 xhci2: 64 bytes context size, 64-bit DMA usbus2 on xhci2 usbus2: 5.0Gbps Super Speed USB v3.0 xhci3: <XHCI (generic) USB 3.0 controller> mem 0x90700000-0x907fffff at device 0.4 on pci6 xhci3: 64 bytes context size, 64-bit DMA usbus3 on xhci3 usbus3: 5.0Gbps Super Speed USB v3.0 pci6: <serial bus, USB> at device 0.5 (no driver attached) pci6: <serial bus, USB> at device 0.6 (no driver attached) isab1: <PCI-ISA bridge> at device 20.3 on pci0 device_attach: isab1 attach returned 6 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 acpi_tz2: <Thermal Zone> on acpi0 acpi_tz3: <Thermal Zone> on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounter "TSC-low" frequency 1996251303 Hz quality 1000 Timecounters tick every 1.000 msec ugen3.1: <AMD XHCI root HUB> at usbus3 ugen2.1: <AMD XHCI root HUB> at usbus2 ugen0.1: <AMD XHCI root HUB> at usbus0 ugen1.1: <AMD XHCI root HUB> at usbus1 uhub0 on usbus3 uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 uhub1 on usbus2 uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 uhub2 on usbus0 uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub3 on usbus1 uhub3: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) nvme0: Allocated 200MB host memory buffer hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 hdacc1: <Realtek ALC295 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC295 Audio Function Group> at nid 1 on hdacc1 hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (23) in association 1! Disabling association. pcm3: <Realtek ALC295 (Internal Analog Mic)> at nid 18 on hdaa1 nda0 at nvme0 bus 0 scbus0 target 0 lun 1 nda0: <WD_BLACK SN770M 500GB 731100WD 233104400974> nda0: [_SERIAL_NUMBER_XXXXXXXXX] nda0: nvme version 1.4 nda0: 476940MB (976773168 512 byte sectors) nda1 at nvme1 bus 0 scbus1 target 0 lun 1 nda1: <WD_BLACK SN850X 1000GB 620361WD 240547802568> nda1: [_SERIAL_NUMBER_XXXXXXXXX] nda1: nvme version 1.4 nda1: 953869MB (1953525168 512 byte sectors) isab1: <PCI-ISA bridge> at device 20.3 on pci0 device_attach: isab1 attach returned 6 Trying to mount root from zfs:zroot/ROOT/default []... uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub2: 7 ports with 7 removable, self powered ugen1.2: <Generic Laptop Camera> at usbus1 ugen0.2: <Framework DisplayPort Expansion Card> at usbus0 ugen0.3: <GenesysLogic USB2.1 Hub> at usbus0 uhub4 on uhub2 uhub4: <GenesysLogic USB2.1 Hub, class 9/0, rev 2.10/34.04, addr 2> on usbus0 uhub4: MTT enabled Root mount waiting for: usbus0 uhub4: 4 ports with 3 removable, self powered ugen0.4: <Logitech USB Receiver> at usbus0 ukbd0 on uhub4 ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/5.00, addr 3> on usbus0 kbd1 at ukbd0 Root mount waiting for: usbus0 ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0 uhub5 on uhub2 uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.60, addr 4> on usbus0 uhub5: MTT enabled uhub5: 3 ports with 3 removable, self powered Root mount waiting for: usbus0 ugen0.6: <Framework Laptop 16 Numpad Module> at usbus0 ukbd1 on uhub5 ukbd1: <Framework Laptop 16 Numpad Module, class 0/0, rev 2.10/0.29, addr 5> on usbus0 kbd2 at ukbd1 ukbd2 on uhub5 ukbd2: <Framework Laptop 16 Numpad Module, class 0/0, rev 2.10/0.29, addr 5> on usbus0 kbd3 at ukbd2 ugen0.7: <vendor 0x05e3 USB2.0 Hub> at usbus0 uhub6 on uhub2 uhub6: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.60, addr 6> on usbus0 uhub6: MTT enabled Root mount waiting for: usbus0 uhub6: 4 ports with 4 removable, self powered ugen0.8: <Goodix Technology Co., Ltd. Goodix Fingerprint USB Device> at usbus0 Root mount waiting for: usbus0 ugen0.9: <Framework Laptop 16 Keyboard Module - ANSI> at usbus0 ukbd3 on uhub6 ukbd3: <Framework Laptop 16 Keyboard Module - ANSI, class 0/0, rev 2.10/0.29, addr 8> on usbus0 kbd4 at ukbd3 ukbd4 on uhub6 ukbd4: <Framework Laptop 16 Keyboard Module - ANSI, class 0/0, rev 2.10/0.29, addr 8> on usbus0 kbd5 at ukbd4 ugen0.10: <MediaTek Inc. WirelessDevice> at usbus0 ugen0.11: <GenesysLogic USB3.2 Hub> at usbus0 uhub7 on uhub2 uhub7: <GenesysLogic USB3.2 Hub, class 9/0, rev 3.20/34.04, addr 10> on usbus0 Root mount waiting for: usbus0 uhub7: 3 ports with 3 removable, self powered ugen0.12: <Realtek USB 10/100/1G/2.5G LAN> at usbus0 [drm] amdgpu kernel modesetting enabled. drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io [drm] initializing kernel modesetting (IP DISCOVERY 0x1002:0x15BF 0xF111:0x0005 0xC1). [drm] register mmio base: 0x90500000 [drm] register mmio size: 524288 [drm] add ip block number 0 <soc21_common> [drm] add ip block number 1 <gmc_v11_0> [drm] add ip block number 2 <ih_v6_0> [drm] add ip block number 3 <psp> [drm] add ip block number 4 <smu> [drm] add ip block number 5 <dm> [drm] add ip block number 6 <gfx_v11_0> [drm] add ip block number 7 <sdma_v6_0> [drm] add ip block number 8 <vcn_v4_0> [drm] add ip block number 9 <jpeg_v4_0> [drm] add ip block number 10 <mes_v11_0> drmn0: Fetched VBIOS from VFCT amdgpu: ATOM BIOS: 113-PHXGENERIC-001 [drm] VCN(0) encode/decode are enabled in VM mode drmn0: [drm] jpeg_v4_0_set_dec_ring_funcsgc_11_0_1_mes_2.bin: could not load binary firmware /boot/firmware/gc_11_0_1_mes_2.bin either amdgpu/gc_11_0_1_mes_2.bin: could not load binary firmware /boot/firmware/amdgpu/gc_11_0_1_mes_2.bin either amdgpu_gc_11_0_1_mes_2.bin: could not load binary firmware /boot/firmware/amdgpu_gc_11_0_1_mes_2.bin either drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_mes_2.bin' gc_11_0_1_mes1.bin: could not load binary firmware /boot/firmware/gc_11_0_1_mes1.bin either amdgpu/gc_11_0_1_mes1.bin: could not load binary firmware /boot/firmware/amdgpu/gc_11_0_1_mes1.bin either amdgpu_gc_11_0_1_mes1.bin: could not load binary firmware /boot/firmware/amdgpu_gc_11_0_1_mes1.bin either drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_mes1.bin' drmn0: Trusted Memory Zone (TMZ) feature enabled drmn0: PCIE atomic ops is not supported [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit drmn0: VRAM: 2048M 0x0000008000000000 - 0x000000807FFFFFFF (2048M used) drmn0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF [drm ERROR :amdgpu_bo_init] Unable to set WC memtype for the aperture base [drm] Detected VRAM RAM=2048M, BAR=2048M [drm] RAM width 128bits DDR5 [drm] amdgpu: 2048M of VRAM memory ready [drm] amdgpu: 31625M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] PCIE GART of 512M enabled (table at 0x000000807FD00000). psp_13_0_4_toc.bin: could not load binary firmware /boot/firmware/psp_13_0_4_toc.bin either amdgpu/psp_13_0_4_toc.bin: could not load binary firmware /boot/firmware/amdgpu/psp_13_0_4_toc.bin either amdgpu_psp_13_0_4_toc.bin: could not load binary firmware /boot/firmware/amdgpu_psp_13_0_4_toc.bin either drmn0: successfully loaded firmware image 'amdgpu/psp_13_0_4_toc.bin' psp_13_0_4_ta.bin: could not load binary firmware /boot/firmware/psp_13_0_4_ta.bin either amdgpu/psp_13_0_4_ta.bin: could not load binary firmware /boot/firmware/amdgpu/psp_13_0_4_ta.bin either amdgpu_psp_13_0_4_ta.bin: could not load binary firmware /boot/firmware/amdgpu_psp_13_0_4_ta.bin either drmn0: successfully loaded firmware image 'amdgpu/psp_13_0_4_ta.bin' drmn0: PSP runtime database doesn't exist drmn0: PSP runtime database doesn't exist dcn_3_1_4_dmcub.bin: could not load binary firmware /boot/firmware/dcn_3_1_4_dmcub.bin either amdgpu/dcn_3_1_4_dmcub.bin: could not load binary firmware /boot/firmware/amdgpu/dcn_3_1_4_dmcub.bin either amdgpu_dcn_3_1_4_dmcub.bin: could not load binary firmware /boot/firmware/amdgpu_dcn_3_1_4_dmcub.bin either drmn0: successfully loaded firmware image 'amdgpu/dcn_3_1_4_dmcub.bin' [drm] Loading DMUB firmware via PSP: version=0x08001B00 gc_11_0_1_imu.bin: could not load binary firmware /boot/firmware/gc_11_0_1_imu.bin either amdgpu/gc_11_0_1_imu.bin: could not load binary firmware /boot/firmware/amdgpu/gc_11_0_1_imu.bin either amdgpu_gc_11_0_1_imu.bin: could not load binary firmware /boot/firmware/amdgpu_gc_11_0_1_imu.bin either drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_imu.bin' gc_11_0_1_pfp.bin: could not load binary firmware /boot/firmware/gc_11_0_1_pfp.bin either amdgpu/gc_11_0_1_pfp.bin: could not load binary firmware /boot/firmware/amdgpu/gc_11_0_1_pfp.bin either amdgpu_gc_11_0_1_pfp.bin: could not load binary firmware /boot/firmware/amdgpu_gc_11_0_1_pfp.bin either drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_pfp.bin' gc_11_0_1_me.bin: could not load binary firmware /boot/firmware/gc_11_0_1_me.bin either amdgpu/gc_11_0_1_me.bin: could not load binary firmware /boot/firmware/amdgpu/gc_11_0_1_me.bin either amdgpu_gc_11_0_1_me.bin: could not load binary firmware /boot/firmware/amdgpu_gc_11_0_1_me.bin either drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_me.bin' gc_11_0_1_rlc.bin: could not load binary firmware /boot/firmware/gc_11_0_1_rlc.bin either amdgpu/gc_11_0_1_rlc.bin: could not load binary firmware /boot/firmware/amdgpu/gc_11_0_1_rlc.bin either amdgpu_gc_11_0_1_rlc.bin: could not load binary firmware /boot/firmware/amdgpu_gc_11_0_1_rlc.bin either drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_rlc.bin' gc_11_0_1_mec.bin: could not load binary firmware /boot/firmware/gc_11_0_1_mec.bin either amdgpu/gc_11_0_1_mec.bin: could not load binary firmware /boot/firmware/amdgpu/gc_11_0_1_mec.bin either amdgpu_gc_11_0_1_mec.bin: could not load binary firmware /boot/firmware/amdgpu_gc_11_0_1_mec.bin either drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_mec.bin' sdma_6_0_1.bin: could not load binary firmware /boot/firmware/sdma_6_0_1.bin either amdgpu/sdma_6_0_1.bin: could not load binary firmware /boot/firmware/amdgpu/sdma_6_0_1.bin either amdgpu_sdma_6_0_1.bin: could not load binary firmware /boot/firmware/amdgpu_sdma_6_0_1.bin either drmn0: successfully loaded firmware image 'amdgpu/sdma_6_0_1.bin' vcn_4_0_2.bin: could not load binary firmware /boot/firmware/vcn_4_0_2.bin either amdgpu/vcn_4_0_2.bin: could not load binary firmware /boot/firmware/amdgpu/vcn_4_0_2.bin either amdgpu_vcn_4_0_2.bin: could not load binary firmware /boot/firmware/amdgpu_vcn_4_0_2.bin either drmn0: successfully loaded firmware image 'amdgpu/vcn_4_0_2.bin' [drm] Found VCN firmware Version ENC: 1.10 DEC: 5 VEP: 0 Revision: 0 drmn0: Will use PSP to load VCN firmware [drm] max_doorbell_slices=255 [drm] reserve 0x4000000 from 0x8078000000 for PSP TMR drmn0: RAS: optional ras ta ucode is not available drmn0: RAP: optional rap ta ucode is not available drmn0: SECUREDISPLAY: securedisplay ta ucode is not available drmn0: SMU is initialized successfully! [drm] Display Core initialized with v3.2.207! [drm] DMUB hardware initialized: version=0x08001B00 [drm] REG_WAIT timeout 1us * 1000 tries - dcn314_dsc_pg_control line:268 [drm] REG_WAIT timeout 1us * 1000 tries - dcn314_dsc_pg_control line:276 [drm] REG_WAIT timeout 1us * 1000 tries - dcn314_dsc_pg_control line:284 [drm] REG_WAIT timeout 1us * 1000 tries - dcn314_dsc_pg_control line:292 lkpi_iic0: <LinuxKPI I2C> on drmn0 iicbus0: <Philips I2C bus> on lkpi_iic0 iic0: <I2C generic I/O> on iicbus0 [drm] PSR support 1, DC PSR ver 0, sink PSR ver 1 DPCD caps 0x2a su_y_granularity 0 lkpi_iic1: <LinuxKPI I2C> on drmn0 iicbus1: <Philips I2C bus> on lkpi_iic1 iic1: <I2C generic I/O> on iicbus1 lkpi_iic2: <LinuxKPI I2C> on drmn0 iicbus2: <Philips I2C bus> on lkpi_iic2 iic2: <I2C generic I/O> on iicbus2 lkpi_iic3: <LinuxKPI I2C> on drmn0 iicbus3: <Philips I2C bus> on lkpi_iic3 iic3: <I2C generic I/O> on iicbus3 lkpi_iic4: <LinuxKPI I2C> on drmn0 iicbus4: <Philips I2C bus> on lkpi_iic4 iic4: <I2C generic I/O> on iicbus4 [drm] DP Alt mode state on HPD: 1 lkpi_iic5: <LinuxKPI I2C> on drmn0 iicbus5: <Philips I2C bus> on lkpi_iic5 iic5: <I2C generic I/O> on iicbus5 lkpi_iic6: <LinuxKPI I2C> on drmn0 iicbus6: <Philips I2C bus> on lkpi_iic6 iic6: <I2C generic I/O> on iicbus6 lkpi_iic7: <LinuxKPI I2C> on drmn0 iicbus7: <Philips I2C bus> on lkpi_iic7 iic7: <I2C generic I/O> on iicbus7 lkpi_iic8: <LinuxKPI I2C> on drmn0 iicbus8: <Philips I2C bus> on lkpi_iic8 iic8: <I2C generic I/O> on iicbus8 [drm] kiq ring mec 3 pipe 1 q 0 [drm] VCN decode and encode initialized successfully(under DPG Mode). drmn0: [drm] jpeg_v4_0_hw_initdrmn0: SE 1, SH per SE 2, CU per SH 6, active_cu_number 12 drmn0: ring gfx_0.0.0 uses VM inv eng 0 on hub 0 drmn0: ring comp_1.0.0 uses VM inv eng 1 on hub 0 drmn0: ring comp_1.1.0 uses VM inv eng 4 on hub 0 drmn0: ring comp_1.2.0 uses VM inv eng 6 on hub 0 drmn0: ring comp_1.3.0 uses VM inv eng 7 on hub 0 drmn0: ring comp_1.0.1 uses VM inv eng 8 on hub 0 drmn0: ring comp_1.1.1 uses VM inv eng 9 on hub 0 drmn0: ring comp_1.2.1 uses VM inv eng 10 on hub 0 drmn0: ring comp_1.3.1 uses VM inv eng 11 on hub 0 drmn0: ring sdma0 uses VM inv eng 12 on hub 0 drmn0: ring vcn_unified_0 uses VM inv eng 0 on hub 1 drmn0: ring jpeg_dec uses VM inv eng 1 on hub 1 drmn0: ring mes_kiq_3.1.0 uses VM inv eng 13 on hub 0 [drm] ring gfx_32768.1.1 was added [drm] ring compute_32768.2.2 was added [drm] ring sdma_32768.3.3 was added [drm] ring gfx_32768.1.1 test pass [drm] ring gfx_32768.1.1 ib test pass [drm] ring compute_32768.2.2 test pass [drm] ring compute_32768.2.2 ib test pass [drm] ring sdma_32768.3.3 test pass [drm] ring sdma_32768.3.3 ib test pass vgapci0: child drmn0 requested pci_get_powerstate sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! lkpi_iic9: <LinuxKPI I2C> on drm1 iicbus9: <Philips I2C bus> on lkpi_iic9 iic9: <I2C generic I/O> on iicbus9 lkpi_iic10: <LinuxKPI I2C> on drm2 iicbus10: <Philips I2C bus> on lkpi_iic10 iic10: <I2C generic I/O> on iicbus10 lkpi_iic11: <LinuxKPI I2C> on drm3 iicbus11: <Philips I2C bus> on lkpi_iic11 iic11: <I2C generic I/O> on iicbus11 lkpi_iic12: <LinuxKPI I2C> on drm4 iicbus12: <Philips I2C bus> on lkpi_iic12 iic12: <I2C generic I/O> on iicbus12 lkpi_iic13: <LinuxKPI I2C> on drm5 iicbus13: <Philips I2C bus> on lkpi_iic13 iic13: <I2C generic I/O> on iicbus13 lkpi_iic14: <LinuxKPI I2C> on drm6 iicbus14: <Philips I2C bus> on lkpi_iic14 iic14: <I2C generic I/O> on iicbus14 lkpi_iic15: <LinuxKPI I2C> on drm7 iicbus15: <Philips I2C bus> on lkpi_iic15 iic15: <I2C generic I/O> on iicbus15 lkpi_iic16: <LinuxKPI I2C> on drm8 iicbus16: <Philips I2C bus> on lkpi_iic16 iic16: <I2C generic I/O> on iicbus16 lkpi_iic17: <LinuxKPI I2C> on drm9 iicbus17: <Philips I2C bus> on lkpi_iic17 iic17: <I2C generic I/O> on iicbus17 [drm] Initialized amdgpu 3.49.0 20150101 for drmn0 on minor 0 VT: Replacing driver "efifb" with new "drmfb". [drm] DSC precompute is not needed. [drm] REG_WAIT timeout 1us * 1000 tries - dcn314_dsc_pg_control line:268 [drm] REG_WAIT timeout 1us * 1000 tries - dcn314_dsc_pg_control line:276 [drm] REG_WAIT timeout 1us * 1000 tries - dcn314_dsc_pg_control line:284 [drm] REG_WAIT timeout 1us * 1000 tries - dcn314_dsc_pg_control line:292 start FB_INFO: height=1440 width=2560 depth=32 pbase=0x0 vbase=0xfffffe0256a00000 name=drmn0 id=amdgpudrmfb flags=0x0 stride=10240 end FB_INFO intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 isab1: <PCI-ISA bridge> at device 20.3 on pci0 device_attach: isab1 attach returned 6 isab1: <PCI-ISA bridge> at device 20.3 on pci0 device_attach: isab1 attach returned 6 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 350 Event timer "HPET2" frequency 14318180 Hz quality 350 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: Embedded MOF found ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) ig4iic0: <Designware I2C Controller> iomem 0xfedc2000-0xfedc2fff irq 10 on acpi0 iicbus18: <Philips I2C bus (ACPI-hinted)> on ig4iic0 iicbus18: <unknown card> at addr 0x51 iic18: <I2C generic I/O> on iicbus18 ig4iic1: <Designware I2C Controller> iomem 0xfedc5000-0xfedc5fff irq 6 on acpi0 iicbus19: <Philips I2C bus (ACPI-hinted)> on ig4iic1 iicbus19: <unknown card> at addr 0x2c iic19: <I2C generic I/O> on iicbus19 lo0: link state changed to UP uhid0 on uhub2 uhid0: <Framework DisplayPort Expansion Card, class 0/0, rev 2.01/0.00, addr 1> on usbus0 ums0 on uhub4 ums0: <Logitech USB Receiver, class 0/0, rev 2.00/5.00, addr 3> on usbus0 ums0: 16 buttons and [XYZT] coordinates ID=2 uhid1 on uhub4 uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/5.00, addr 3> on usbus0 uhid2 on uhub5 uhid2: <Framework Laptop 16 Numpad Module, class 0/0, rev 2.10/0.29, addr 5> on usbus0 uhid3 on uhub5 uhid3: <Framework Laptop 16 Numpad Module, class 0/0, rev 2.10/0.29, addr 5> on usbus0 uhid4 on uhub6 uhid4: <Framework Laptop 16 Keyboard Module - ANSI, class 0/0, rev 2.10/0.29, addr 8> on usbus0 uhid5 on uhub6 uhid5: <Framework Laptop 16 Keyboard Module - ANSI, class 0/0, rev 2.10/0.29, addr 8> on usbus0 ubt0 on uhub2 ubt0: <MediaTek Inc. WirelessDevice, class 239/2, rev 2.10/1.00, addr 9> on usbus0 ubt1 on uhub2 ubt1: <MediaTek Inc. WirelessDevice, class 239/2, rev 2.10/1.00, addr 9> on usbus0 ubt1: ubt_attach:670: could not get two interfaces device_attach: ubt1 attach returned 6 ubt1 on uhub2 ubt1: <MediaTek Inc. WirelessDevice, class 239/2, rev 2.10/1.00, addr 9> on usbus0 ubt1: ubt_attach:670: could not get two interfaces device_attach: ubt1 attach returned 6 ure0 on uhub7 ure0: <Realtek USB 10/100/1G/2.5G LAN, class 0/0, rev 3.20/31.04, addr 11> on usbus0 iichid0: <FRMW0003:05 32AC:001B I2C HID device> at addr 0x51 on iicbus18 iichid0: Using sampling mode hidbus0: <HID bus> on iichid0 ue0: <USB Ethernet> on ure0 ue0: Ethernet address: [_MAC_XXXXXXXXXX] iichid1: <PIXA3854:06 093A:0274 I2C HID device> at addr 0x2c on iicbus19 iichid1: Using sampling mode hidbus1: <HID bus> on iichid1 ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout ue0: link state changed to DOWN ue0: link state changed to UP hms0: <PIXA3854:06 093A:0274 Mouse> on hidbus1 hms0: 2 buttons and [XYWH] coordinates ID=1 hmt0: <PIXA3854:06 093A:0274 TouchPad> on hidbus1 hconf0: <PIXA3854:06 093A:0274 Configuration> on hidbus1 hmt0: Multitouch touchpad with 0 external buttons, click-pad hmt0: 5 contacts with [C] properties. Report range [0:0] - [3841:2392]