Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-11-20 15:19:56
From: nomad
Description: FreeBSD/amd64 on MSI MS-7758
---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.1-RELEASE-p2 NOMADBSD amd64 FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) VT(vga): text 80x25 module_register: cannot register pci/re from kernel; already loaded from if_re.ko Module pci/re failed to register: 17 module_register: cannot register re/miibus from kernel; already loaded from if_re.ko Module re/miibus failed to register: 17 CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (3392.46-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16302751744 (15547 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 Launching APs: 1 5 3 4 7 2 6 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de smbios0: Version: 2.7, BCD Revision: 2.7 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <ALASKA A M I> acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1 vgapci0: Boot video device hdac0: <NVIDIA (0x0e1b) HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci1 vgapci1: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7900000-0xf790ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7917000-0xf79173ff irq 16 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 hdac1: <Intel Panther Point HDA Controller> mem 0xf7910000-0xf7913fff irq 22 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7804000-0xf7804fff,0xf7800000-0xf7803fff irq 17 at device 0.0 on pci3 re0: Using 1 MSI-X message re0: Chip rev. 0x2c800000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci4 pci5: <ACPI PCI bus> on pcib5 ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7916000-0xf79163ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7915000-0xf79157ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich1: <AHCI channel> at channel 1 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ppc1: <Parallel port> port 0x378-0x37f irq 5 drq 3 on acpi0 ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc1 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] est0: <Enhanced SpeedStep Frequency Control> on cpu0 sysctl_warn_reuse: can't re-use a leaf (hw.acpi.cpu.cppc_notify)! Timecounter "TSC-low" frequency 1696150006 Hz quality 1000 Timecounters tick every 1.000 msec hdacc0: <NVIDIA (0x0042) HDA CODEC> at cad 0 on hdac0 hdaa0: <NVIDIA (0x0042) Audio Function Group> at nid 1 on hdacc0 pcm0: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 4 on hdaa0 pcm1: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 5 on hdaa0 pcm2: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 7 on hdaa0 hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 pcm3: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 pcm4: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 hdacc2: <Intel Panther Point HDA CODEC> at cad 3 on hdac1 hdaa2: <Intel Panther Point Audio Function Group> at nid 1 on hdacc2 pcm5: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa2 ugen2.1: <Intel EHCI root HUB> at usbus2 ugen1.1: <Intel EHCI root HUB> at usbus1 Trying to mount root from ufs:/dev/label/nomadroot [rw,noatime]... uhub0 on usbus2 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 sysctl_warn_reuse: can't re-use a leaf (dev.uhub.%parent)! uhub1 on usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen0.1: <Intel XHCI root HUB> at usbus0 uhub2 on usbus0 uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 ada0: <ST31000525SV CV12> ATA8-ACS SATA 2.x device ada0: [_SERIAL_NUMBER_XXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: ada0,pass0 in 'Slot 01', SATA Slot: scbus0 target 0 uhub2: 8 ports with 8 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered Root mount waiting for: usbus1 usbus2 ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 uhub3 on uhub1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 uhub4 on uhub0 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 uhub3: 6 ports with 6 removable, self powered Root mount waiting for: usbus1 usbus2 uhub4: 8 ports with 8 removable, self powered ugen1.3: <Kingston DataTraveler SE9> at usbus1 umass0 on uhub3 umass0: <Kingston DataTraveler SE9, class 0/0, rev 2.00/1.00, addr 3> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0xc000 umass0:2:0: Attached to scbus2 da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 da0: <Kingston DataTraveler SE9 PMAP> Removable Direct Access SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX] da0: 40.000MB/s transfers da0: 14883MB (30481152 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> ugen2.3: <802.11n USB WLAN> at usbus2 ugen1.4: <vendor 0x0000 USB OPTICAL MOUSE> at usbus1 ums0 on uhub3 ums0: <vendor 0x0000 USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 4> on usbus1 ums0: 3 buttons and [XYZ] coordinates ID=1 ugen1.5: <NOVATEK USB Keyboard> at usbus1 ukbd0 on uhub3 ukbd0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.04, addr 5> on usbus1 kbd2 at ukbd0 WARNING: /: TRIM flag on fs but disk does not support TRIM WARNING: /data: TRIM flag on fs but disk does not support TRIM Cuse v0.1.37 @ /dev/cuse ichsmb0: <Intel Panther Point SMBus controller> port 0xf040-0xf05f mem 0xf7914000-0xf79140ff irq 18 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device re0: link state changed to DOWN lo0: link state changed to UP rtwn0 on uhub4 rtwn0: <802.11n USB WLAN, class 0/0, rev 2.00/2.00, addr 3> on usbus2 rtwn0: MAC/BB RTL8192CU, RF 6052 2T2R uhid0 on uhub3 uhid0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.04, addr 5> on usbus1