Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-11-26 06:45:44
From: kb
Description: FreeBSD/amd64 on System manufacturer P5Q
---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.1-RELEASE-p5 GENERIC amd64 FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz (2666.45-MHz K8-class CPU) Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xc08e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,OSXSAVE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> VT-x: HLT,PAUSE TSC: P-state invariant, performance statistics real memory = 15032385536 (14336 MB) avail memory = 14543241216 (13869 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <A_M_I_ OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 Launching APs: 3 2 1 Cuse v0.1.37 @ /dev/cuse random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xfbc40-0xfbc5e smbios0: Version: 2.5 aesni0: No AES or SHA support. acpi0: <A_M_I_ OEMRSDT> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xcc00-0xcc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1 vgapci0: Boot video device uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xb800-0xb81f irq 16 at device 26.0 on pci0 uhci0: LegSup = 0x2f00 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xb880-0xb89f irq 21 at device 26.1 on pci0 uhci1: LegSup = 0x2f00 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xbc00-0xbc1f irq 18 at device 26.2 on pci0 uhci2: LegSup = 0x2f00 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xf9fffc00-0xf9ffffff irq 18 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: 480Mbps High Speed USB v2.0 hdac0: <Intel 82801JI HDA Controller> mem 0xf9ff8000-0xf9ffbfff irq 22 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pci2: <ACPI PCI bus> on pcib3 atapci0: <Marvell 88SE6121 UDMA133 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f mem 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2 ahci0: <Marvell 88SE6121 AHCI SATA controller> at channel -1 on atapci0 ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier not supported ahci0: quirks=0x457<NOFORCE,NOPMP,NONCQ,2CH,EDGEIS,NOCOUNT> ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ata2: <ATA channel> at channel 0 on atapci0 pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pci3: <ACPI PCI bus> on pcib4 ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0xdc00-0xdc7f mem 0xfe9c0000-0xfe9fffff irq 17 at device 0.0 on pci3 ale0: 960 Tx FIFO, 1024 Rx FIFO ale0: Using 1 MSI messages. miibus0: <MII bus> on ale0 atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0 atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow ale0: Using defaults for TSO: 65518/35/2048 ale0: Ethernet address: [_MAC_XXXXXXXXXX] uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xb080-0xb09f irq 23 at device 29.0 on pci0 uhci3: LegSup = 0x2f00 usbus4 on uhci3 usbus4: 12Mbps Full Speed USB v1.0 uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xb400-0xb41f irq 19 at device 29.1 on pci0 uhci4: LegSup = 0x2f00 usbus5 on uhci4 usbus5: 12Mbps Full Speed USB v1.0 uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xb480-0xb49f irq 18 at device 29.2 on pci0 uhci5: LegSup = 0x2f00 usbus6 on uhci5 usbus6: 12Mbps Full Speed USB v1.0 ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xf9fff800-0xf9fffbff irq 23 at device 29.7 on pci0 usbus7: EHCI version 1.0 usbus7 on ehci1 usbus7: 480Mbps High Speed USB v2.0 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib5 pci4: <serial bus, FireWire> at device 3.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH10 SATA300 controller> port 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 19 at device 31.2 on pci0 ata3: <ATA channel> at channel 0 on atapci1 ata4: <ATA channel> at channel 1 on atapci1 atapci2: <Intel ICH10 SATA300 controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f irq 19 at device 31.5 on pci0 ata5: <ATA channel> at channel 0 on atapci2 ata6: <ATA channel> at channel 1 on atapci2 acpi_button0: <Power Button> on acpi0 ns8250: UART FCR is broken ns8250: UART FCR is broken uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC-low" frequency 1333181357 Hz quality 1000 Timecounters tick every 1.000 msec hdacc0: <Realtek ALC1200 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC1200 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC1200 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0 pcm1: <Realtek ALC1200 (Front Analog)> at nid 27 and 25 on hdaa0 pcm2: <Realtek ALC1200 (Rear Digital)> at nid 30 on hdaa0 pcm3: <Realtek ALC1200 (Onboard Digital)> at nid 17 on hdaa0 ugen1.1: <Intel UHCI root HUB> at usbus1 ugen6.1: <Intel UHCI root HUB> at usbus6 ugen7.1: <Intel EHCI root HUB> at usbus7 ugen5.1: <Intel UHCI root HUB> at usbus5 uhub0 on usbus1 uhub1 on usbus7 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 uhub2 on usbus5 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen0.1: <Intel UHCI root HUB> at usbus0 uhub3 on usbus6 uhub4 on usbus0 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen4.1: <Intel UHCI root HUB> at usbus4 ugen2.1: <Intel UHCI root HUB> at usbus2 uhub5 on usbus4 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 uhub6 on usbus2 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel EHCI root HUB> at usbus3 uhub7 on usbus3 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 Trying to mount root from ufs:/dev/ada0p2 [rw]... uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered Root mount waiting for: usbus3 CAM usbus7 Root mount waiting for: usbus3 CAM usbus7 uhub7: 6 ports with 6 removable, self powered uhub1: 6 ports with 6 removable, self powered Root mount waiting for: CAM usbus7 ugen4.2: <Logitech USB Optical Mouse> at usbus4 ada0 at ata3 bus 0 scbus3 target 0 lun 0 ada0: <ST3500320AS SD15> ATA8-ACS SATA 1.x device ada0: [_SERIAL_NUMBER_XXXXX] ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: 476940MB (976773168 512 byte sectors) ugen7.2: <Trust Webcam Trust Webcam> at usbus7 ugen5.2: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard> at usbus5 ukbd0 on uhub2 ukbd0: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 2> on usbus5 kbd2 at ukbd0 ukbd1 on uhub2 ukbd1: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 2> on usbus5 kbd3 at ukbd1 ichsmb0: <Intel 82801JI (ICH10) SMBus controller> port 0x400-0x41f mem 0xf9fff400-0xf9fff4ff irq 18 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 lo0: link state changed to UP ale0: link state changed to DOWN ums0 on uhub5 ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 2> on usbus4 ums1 on uhub2 ums1: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 2> on usbus5 ums0: 3 buttons and [XYZ] coordinates ID=0 ale0: link state changed to UP ugen7.2: <Trust Webcam Trust Webcam> at usbus7 (disconnected) ugen7.2: <Trust Webcam Trust Webcam> at usbus7 ugen7.2: <Trust Webcam Trust Webcam> at usbus7 (disconnected) ugen7.2: <Trust Webcam Trust Webcam> at usbus7