Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-12-02 16:19:14
From: Chicho
Description: FreeBSD 14.2-RELEASE on a Compulab fitlet2
---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.2-RELEASE releng/14.2-n269506-c8918d6c7412 GENERIC amd64 FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) VT(vga): resolution 640x480 CPU microcode: updated from 0x40 to 0x48 CPU: Intel(R) Atom(TM) Processor E3950 @ 1.60GHz (1593.60-MHz K8-class CPU) Origin="GenuineIntel" Id=0x506c9 Family=0x6 Model=0x5c Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> Structured Extended Features3=0x2c000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> IA32_ARCH_CAPS=0xc79<RDCL_NO,SKIP_L1DFL_VME,SSB_NO,MDS_NO> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 3870380032 (3691 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: < > WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 Launching APs: 2 3 1 random: entropy device external interface kbd0 at kbdmux0 smbios0: <System Management BIOS> at iomem 0x7a02b000-0x7a02b01e smbios0: Version: 3.0, BCD Revision: 3.0 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> ossl0: <OpenSSL crypto> acpi0: <ALASKA A M I > unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 19200000 Hz quality 950 Event timer "HPET" frequency 19200000 Hz quality 550 Event timer "HPET1" frequency 19200000 Hz quality 440 Event timer "HPET2" frequency 19200000 Hz quality 440 Event timer "HPET3" frequency 19200000 Hz quality 440 Event timer "HPET4" frequency 19200000 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xc0000000-0xc0ffffff,0xb0000000-0xbfffffff at device 2.0 on pci0 vgapci0: Boot video device hdac0: <Intel Broxton-P HDA Controller> mem 0x7ffff00000-0x7ffff03fff,0x7fffe00000-0x7fffefffff irq 25 at device 14.0 on pci0 pci0: <simple comms> at device 15.0 (no driver attached) ahci0: <Intel Apollo Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xc1210000-0xc1211fff,0xc1213000-0xc12130ff,0xc1212000-0xc12127ff at device 18.0 on pci0 ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 pci1: <ACPI PCI bus> on pcib1 igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xc1100000-0xc111ffff,0xc1120000-0xc1123fff at device 0.0 on pci1 igb0: NVM V0.4 imgtype1 igb0: Using 1024 TX descriptors and 1024 RX descriptors igb0: Using 2 RX queues 2 TX queues igb0: Using MSI-X interrupts with 3 vectors igb0: Ethernet address: xx:xx:xx:xx:xx:xx igb0: netmap queues/slots: TX 2/1024, RX 2/1024 pcib2: <ACPI PCI-PCI bridge> at device 19.2 on pci0 pci2: <ACPI PCI bus> on pcib2 igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xc1000000-0xc101ffff,0xc1020000-0xc1023fff at device 0.0 on pci2 igb1: NVM V0.4 imgtype1 igb1: Using 1024 TX descriptors and 1024 RX descriptors igb1: Using 2 RX queues 2 TX queues igb1: Using MSI-X interrupts with 3 vectors igb1: Ethernet address: xx:xx:xx:xx:xx:xx igb1: netmap queues/slots: TX 2/1024, RX 2/1024 xhci0: <Intel Apollo Lake USB 3.0 controller> mem 0xc1200000-0xc120ffff irq 17 at device 21.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 uart0: <Intel Apollo Lake SIO/LPSS UART 0> mem 0x7ffff0a000-0x7ffff0afff,0x7ffff09000-0x7ffff09fff irq 4 at device 24.0 on pci0 uart1: <Intel Apollo Lake SIO/LPSS UART 1> mem 0x7ffff08000-0x7ffff08fff,0x7ffff07000-0x7ffff07fff irq 5 at device 24.1 on pci0 uart2: <Intel Apollo Lake SIO/LPSS UART 2> mem 0xfea10000-0xfea10fff irq 6 at device 24.2 on pci0 ns8250: UART FCR is broken uart2: console (115200,n,8,1) uart3: <Intel Apollo Lake SIO/LPSS UART 3> mem 0x7ffff06000-0x7ffff06fff,0x7ffff05000-0x7ffff05fff irq 7 at device 24.3 on pci0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC" frequency 1593599523 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC1150 (Rear Analog)> at nid 26 and 24 on hdaa0 pcm1: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa0 hdacc1: <Intel Broxton HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Broxton Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Broxton (HDMI/DP 8ch)> at nid 3 on hdaa1 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <M2SCF-6M 32GB Q0707A> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 30208MB (61865984 512 byte sectors) Trying to mount root from zfs:zroot/ROOT/default []... ugen0.1: <Intel XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub0: 15 ports with 15 removable, self powered Setting hostuuid: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx. Setting hostid: xxxxxxxxxx. no pools available to import GEOM_ELI: Device gpt/swap0.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: accelerated software Starting file system checks: /dev/gpt/efiboot0: FILESYSTEM CLEAN; SKIPPING CHECKS Mounting local filesystems:. Setting hostname: xxxx. Additional TCP/IP options: TCP keepalive=NO drop SYN+FIN packets=YES IPv6 Privacy Addresses. Setting up harvesting: PURE_RDRAND,[CALLOUT],[UMA],[FS_ATIME],SWI,[INTERRUPT],NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy: . ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.36/mach/CORE 32-bit compatibility ldconfig path: /usr/lib32 Loading kernel modules: coretemp0: <CPU On-Die Thermal Sensors> on cpu0 Autoloading module: ichsmb Autoloading module: ig4 ig4iic0: <Intel Apollo Lake I2C Controller-0> mem 0x7ffff1a000-0x7ffff1afff,0x7ffff19000-0x7ffff19fff irq 27 at device 22.0 on pci0 ig4iic0: Using MSI iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 ig4iic1: <Intel Apollo Lake I2C Controller-1> mem 0x7ffff18000-0x7ffff18fff,0x7ffff17000-0x7ffff17fff irq 28 at device 22.1 on pci0 ig4iic1: Using MSI iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 ig4iic2: <Intel Apollo Lake I2C Controller-2> mem 0x7ffff16000-0x7ffff16fff,0x7ffff15000-0x7ffff15fff irq 29 at device 22.2 on pci0 ig4iic2: Using MSI iicbus2: <Philips I2C bus (ACPI-hinted)> on ig4iic2 ig4iic3: <Intel Apollo Lake I2C Controller-3> mem 0x7ffff14000-0x7ffff14fff,0x7ffff13000-0x7ffff13fff irq 30 at device 22.3 on pci0 ig4iic3: Using MSI iicbus3: <Philips I2C bus (ACPI-hinted)> on ig4iic3 ig4iic4: <Intel Apollo Lake I2C Controller-4> mem 0x7ffff12000-0x7ffff12fff,0x7ffff11000-0x7ffff11fff irq 31 at device 23.0 on pci0 ig4iic4: Using MSI iicbus4: <Philips I2C bus (ACPI-hinted)> on ig4iic4 ig4iic5: <Intel Apollo Lake I2C Controller-5> mem 0x7ffff10000-0x7ffff10fff,0x7ffff0f000-0x7ffff0ffff irq 32 at device 23.1 on pci0 ig4iic5: Using MSI iicbus5: <Philips I2C bus (ACPI-hinted)> on ig4iic5 ig4iic6: <Intel Apollo Lake I2C Controller-6> mem 0x7ffff0e000-0x7ffff0efff,0x7ffff0d000-0x7ffff0dfff irq 33 at device 23.2 on pci0 ig4iic6: Using MSI iicbus6: <Philips I2C bus (ACPI-hinted)> on ig4iic6 ig4iic7: <Intel Apollo Lake I2C Controller-7> mem 0x7ffff0c000-0x7ffff0cfff,0x7ffff0b000-0x7ffff0bfff irq 34 at device 23.3 on pci0 ig4iic7: Using MSI iicbus7: <Philips I2C bus (ACPI-hinted)> on ig4iic7 ichsmb0: <Intel Broxton SMBus controller> port 0xf040-0xf05f mem 0x7ffff04000-0x7ffff040ff at device 31.1 on pci0 smbus0: <System Management Bus> on ichsmb0 igb0: changing name to 'wan0' wan0 igb1: changing name to 'lan0' lan0 lo0: link state changed to UP vlan0: changing name to 'data' data vlan1: changing name to 'voice' voice vlan2: changing name to 'guest' guest Starting Network: lo0 wan0 lan0 enc0. wan0: link state changed to UP lan0: link state changed to UP guest: link state changed to UP data: link state changed to UP voice: link state changed to UP Starting pflog. pflog0: promiscuous mode enabled Security policy loaded: MAC/ntpd (mac_ntpd)