Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-12-05 13:13:13
From: dch
Description: Oracle Cloud 14.2-RELEASE arm64 VM.Standard.A1.Flex
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.2-RELEASE releng/14.2-n269506-c8918d6c7412 GENERIC arm64
FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67)
VT: init without driver.
module scmi already present!
module_register: cannot register tmpfs from kernel; already loaded from tmpfs.ko
Module tmpfs failed to register: 17
real memory = 25769803776 (24576 MB)
avail memory = 25092550656 (23930 MB)
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
kbd0 at kbdmux0
acpi0: <BOCHS BXPCFACP>
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi0: Could not update all GPEs: AE_NOT_CONFIGURED
psci0: <ARM Power State Co-ordination Interface Driver> on acpi0
gic0: <ARM Generic Interrupt Controller v3.0> iomem 0x8000000-0x800ffff,0x80a0000-0x8ffffff on acpi0
its0: <ARM GIC Interrupt Translation Service> mem 0x8080000-0x809ffff on gic0
generic_timer0: <ARM Generic Timer> irq 34,35,36,37 on acpi0
Timecounter "ARM MPCore Timecounter" frequency 25000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 25000000 Hz quality 1000
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
pmu0: <Performance Monitoring Unit> on acpi0
cpu0: <ACPI CPU> on acpi0
uart0: <PrimeCell UART (PL011)> iomem 0x9000000-0x9000fff irq 0 on acpi0
uart0: console (9600,n,8,1)
pcib0: <Generic PCI host controller> on acpi0
pci0: <PCI bus> on pcib0
virtio_pci0: <VirtIO PCI (modern) GPU adapter> mem 0x13019000-0x13019fff,0x8030000000-0x8030003fff at device 1.0 on pci0
vtgpu0: <VirtIO GPU> on virtio_pci0
VT: initialize with new VT driver "virtio_gpu".
xhci0: <XHCI (generic) USB 3.0 controller> mem 0x8030008000-0x803000bfff at device 2.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
pcib1: <PCI-PCI bridge> mem 0x13018000-0x13018fff at device 3.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> mem 0x13017000-0x13017fff at device 3.1 on pci0
pci2: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> mem 0x13016000-0x13016fff at device 3.2 on pci0
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> mem 0x13015000-0x13015fff at device 3.3 on pci0
pci4: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> mem 0x13014000-0x13014fff at device 3.4 on pci0
pci5: <PCI bus> on pcib5
pcib6: <PCI-PCI bridge> mem 0x13013000-0x13013fff at device 3.5 on pci0
pci6: <PCI bus> on pcib6
pcib7: <PCI-PCI bridge> mem 0x13012000-0x13012fff at device 3.6 on pci0
pci7: <PCI bus> on pcib7
pcib8: <PCI-PCI bridge> mem 0x13011000-0x13011fff at device 3.7 on pci0
pci8: <PCI bus> on pcib8
pcib9: <PCI-PCI bridge> mem 0x13010000-0x13010fff at device 4.0 on pci0
pci9: <PCI bus> on pcib9
pcib10: <PCI-PCI bridge> mem 0x1300f000-0x1300ffff at device 4.1 on pci0
pci10: <PCI bus> on pcib10
pcib11: <PCI-PCI bridge> mem 0x1300e000-0x1300efff at device 4.2 on pci0
pci11: <PCI bus> on pcib11
pcib12: <PCI-PCI bridge> mem 0x1300d000-0x1300dfff at device 4.3 on pci0
pci12: <PCI bus> on pcib12
pcib13: <PCI-PCI bridge> mem 0x1300c000-0x1300cfff at device 4.4 on pci0
pci13: <PCI bus> on pcib13
pcib14: <PCI-PCI bridge> mem 0x1300b000-0x1300bfff at device 4.5 on pci0
pci14: <PCI bus> on pcib14
pcib15: <PCI-PCI bridge> mem 0x1300a000-0x1300afff at device 4.6 on pci0
pci15: <PCI bus> on pcib15
pcib16: <PCI-PCI bridge> mem 0x13009000-0x13009fff at device 4.7 on pci0
pci16: <PCI bus> on pcib16
pcib17: <PCI-PCI bridge> mem 0x13008000-0x13008fff at device 5.0 on pci0
pci17: <PCI bus> on pcib17
pcib18: <PCI-PCI bridge> mem 0x13007000-0x13007fff at device 5.1 on pci0
pci18: <PCI bus> on pcib18
pcib19: <PCI-PCI bridge> mem 0x13006000-0x13006fff at device 5.2 on pci0
pci19: <PCI bus> on pcib19
pcib20: <PCI-PCI bridge> mem 0x13005000-0x13005fff at device 5.3 on pci0
pci20: <PCI bus> on pcib20
pcib21: <PCI-PCI bridge> mem 0x13004000-0x13004fff at device 5.4 on pci0
pci21: <PCI bus> on pcib21
pcib22: <PCI-PCI bridge> mem 0x13003000-0x13003fff at device 5.5 on pci0
pci22: <PCI bus> on pcib22
pcib23: <PCI-PCI bridge> mem 0x13002000-0x13002fff at device 5.6 on pci0
pci23: <PCI bus> on pcib23
pcib24: <PCI-PCI bridge> mem 0x13001000-0x13001fff at device 5.7 on pci0
pci24: <PCI bus> on pcib24
virtio_pci1: <VirtIO PCI (modern) SCSI adapter> mem 0x10000000-0x10000fff,0x802e000000-0x802e003fff at device 0.0 on pci24
vtscsi0: <VirtIO SCSI Adapter> on virtio_pci1
virtio_pci2: <VirtIO PCI (modern) Network adapter> mem 0x13000000-0x13000fff,0x8030004000-0x8030007fff at device 6.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci2
vtnet0: Ethernet address: [_MAC_XXXXXXXXXX]
vtnet0: netmap queues/slots: TX 2/256, RX 2/128
000.000077 [ 452] vtnet_netmap_attach vtnet attached txq=2, txd=256 rxq=2, rxd=128
acpi_ged0: <Generic Event Device> irq 33 on acpi0
acpi_ged0: Raw IRQ 41
acpi_button0: <Power Button> on acpi0
armv8crypto0: <AES-CBC,AES-XTS,AES-GCM>
module_register_init: MOD_LOAD (tmpfs, 0xffff0000005d12e4, 0xffff0000013a3570) error 17
Timecounters tick every 1.000 msec
usbus0: 5.0Gbps Super Speed USB v3.0
ugen0.1: <(0x1b36) XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <(0x1b36) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
sysctl_unregister_oid: failed(22) to unregister sysctl(tmpfs)
CPU 0: ARM Neoverse-N1 r3p1 affinity: 0
Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG,IDC>
Instruction Set Attributes 0 = <DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL>
Instruction Set Attributes 1 = <RCPC-8.3,DCPoP>
Instruction Set Attributes 2 = <>
Processor Features 0 = <CSV3,CSV2,RAS,GIC,AdvSIMD+HP,FP+HP,EL3,EL2,EL1,EL0 32>
Processor Features 1 = <PSTATE.SSBS MSR>
Processor Features 2 = <>
Memory Model Features 0 = <TGran4,TGran64,TGran16,SNSMem,BigEnd,16bit ASID,256TB PA>
Memory Model Features 1 = <PAN+ATS1E1,LO,HPD+TTPBHA,VH,16bit VMID,HAF+DS>
Memory Model Features 2 = <32bit CCIDX,48bit VA,UAO,CnP>
Memory Model Features 3 = <>
Memory Model Features 4 = <>
Debug Features 0 = <DoubleLock,SPE,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3p1,Debugv8p2>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
AArch32 Instruction Set Attributes 5 = <RDM,CRC32,SHA2,SHA1,AES+VMULL,SEVL>
AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD>
AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP Arith,SIMDHP Arith,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ>
CPU 1: ARM Neoverse-N1 r3p1 affinity: 1
CPU 2: ARM Neoverse-N1 r3p1 affinity: 2
CPU 3: ARM Neoverse-N1 r3p1 affinity: 3
gic0: using for IPIs
Release APs...Trying to mount root from zfs:zroot/ROOT/default []...
done
TCP_ratelimit: Is now initialized
pass0 at vtscsi0 bus 0 scbus0 target 0 lun 0
pass0: <QEMU QEMU TARGET 2.5> Fixed Uninstalled SPC-3 SCSI device (offline)
pass0:da0 at vtscsi0 bus 0 scbus0 target 0 lun 1
da0: <ORACLE BlockVolume 1.0> Fixed Direct Access SPC-5 SCSI device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 51200MB (104857600 512 byte sectors)
300.000MB/s transfers
pass0: Command Queueing enabled
(da0:vtscsi0:0:0:1): READ(6)/WRITE(6) not supported, increasing minimum_cmd_size to 10.
uhub0: 8 ports with 8 removable, self powered
ugen0.2: <QEMU QEMU USB Tablet> at usbus0
Root mount waiting for: usbus0
ugen0.3: <QEMU QEMU USB Keyboard> at usbus0
ukbd0 on uhub0
ukbd0: <QEMU QEMU USB Keyboard, class 0/0, rev 2.00/0.00, addr 2> on usbus0
kbd1 at ukbd0
ugen0.4: <QEMU QEMU USB Mouse> at usbus0
(da0:vtscsi0:0:0:1): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00
(da0:vtscsi0:0:0:1): CAM status: SCSI Status Error
(da0:vtscsi0:0:0:1): SCSI status: Check Condition
(da0:vtscsi0:0:0:1): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(da0:vtscsi0:0:0:1): Error 22, Unretryable error
Dual Console: Serial Primary, Video Secondary
lo0: link state changed to UP
vtnet0: link state changed to UP
lo1: link state changed to UP
uhid0 on uhub0
uhid0: <QEMU QEMU USB Tablet, class 0/0, rev 2.00/0.00, addr 1> on usbus0
ums0 on uhub0
ums0: <QEMU QEMU USB Mouse, class 0/0, rev 2.00/0.00, addr 3> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0