NYC*BUG dmesgd

Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

---

Date: 2024-12-10 15:08:15
From: janjoris
Description: FreeBSD/arm64 on

OpenBSD 7.6 (GENERIC.MP) #0: Wed Oct 30 02:24:03 MDT 2024
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem  = 4124938240 (3933MB)
avail mem = 3956858880 (3773MB)
random: good seed from bootblocks
mainbus0 at root: Raspberry Pi 4 Model B Rev 1.5
efi0 at mainbus0: UEFI 2.8
efi0: Das U-Boot rev 0x20211000
smbios0 at efi0: SMBIOS 3.0
smbios0: vendor U-Boot version "2021.10" date 10/01/2021
smbios0: Unknown Unknown Product
cpu0 at mainbus0 mpidr 0: ARM Cortex-A72 r0p3
cpu0: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu0: 1024KB 64b/line 16-way L2 cache
cpu0: CRC32,ASID16
cpu1 at mainbus0 mpidr 1: ARM Cortex-A72 r0p3
cpu1: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu1: 1024KB 64b/line 16-way L2 cache
cpu2 at mainbus0 mpidr 2: ARM Cortex-A72 r0p3
cpu2: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu2: 1024KB 64b/line 16-way L2 cache
cpu3 at mainbus0 mpidr 3: ARM Cortex-A72 r0p3
cpu3: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu3: 1024KB 64b/line 16-way L2 cache
"linux,cma" at mainbus0 not configured
"nvram" at mainbus0 not configured
apm0 at mainbus0
simplefb0 at mainbus0: 1920x1200, 32bpp
wsdisplay0 at simplefb0 mux 1
wsdisplay0: screen 0-5 added (std, vt100 emulation)
"system" at mainbus0 not configured
"axi" at mainbus0 not configured
simplebus0 at mainbus0: "soc"
bcmclock0 at simplebus0
bcmmbox0 at simplebus0
bcmgpio0 at simplebus0
bcmaux0 at simplebus0
ampintc0 at simplebus0 nirq 256, ncpu 4 ipi: 0, 1, 2: "interrupt-controller"
bcmtmon0 at simplebus0
bcmdmac0 at simplebus0: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA9 DMA10
"timer" at simplebus0 not configured
pluart0 at simplebus0: rev 2, 16 byte fifo
pluart0: console
"local_intc" at simplebus0 not configured
bcmdog0 at simplebus0
bcmirng0 at simplebus0
"firmware" at simplebus0 not configured
"power" at simplebus0 not configured
"mailbox" at simplebus0 not configured
sdhc0 at simplebus0
sdhc0: SDHC 3.00, 250 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed
"gpiomem" at simplebus0 not configured
"fb" at simplebus0 not configured
"vcsm" at simplebus0 not configured
"clocks" at mainbus0 not configured
"phy" at mainbus0 not configured
"clk-27M" at mainbus0 not configured
"clk-108M" at mainbus0 not configured
simplebus1 at mainbus0: "emmc2bus"
sdhc1 at simplebus1
sdhc1: SDHC 3.00, 100 MHz base clock
sdmmc1 at sdhc1: 8-bit, sd high-speed, mmc high-speed, ddr52, dma
"arm-pmu" at mainbus0 not configured
agtimer0 at mainbus0: 54000 kHz
simplebus2 at mainbus0: "scb"
bcmpcie0 at simplebus2: "pcie"
pci0 at bcmpcie0
ppb0 at pci0 dev 0 function 0 "Broadcom BCM2711" rev 0x20
pci1 at ppb0 bus 1
xhci0 at pci1 dev 0 function 0 "VIA VL805 xHCI" rev 0x01: intx, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "VIA xHCI root hub" rev 3.00/1.00 addr 1
bse0 at simplebus2: address [_MAC_XXXXXXXXXX]
brgphy0 at bse0 phy 1: BCM54210E, rev. 2
"dma" at simplebus2 not configured
"hevc-decoder" at simplebus2 not configured
"rpivid-local-intc" at simplebus2 not configured
"h264-decoder" at simplebus2 not configured
"vp9-decoder" at simplebus2 not configured
gpioleds0 at mainbus0: "led0", "led1"
"sd_io_1v8_reg" at mainbus0 not configured
"sd_vcc_reg" at mainbus0 not configured
"fixedregulator_3v3" at mainbus0 not configured
"fixedregulator_5v0" at mainbus0 not configured
simplebus3 at mainbus0: "v3dbus"
scsibus0 at sdmmc1: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, USDU1, 0020> removable
sd0: 30560MB, 512 bytes/sector, 62586880 sectors
uhub1 at uhub0 port 1 configuration 1 interface 0 "VIA Labs USB2.0 Hub" rev 2.10/4.21 addr 2
bwfm0 at sdmmc0 function 1
manufacturer 0x02d0, product 0xa9a6 at sdmmc0 function 2 not configured
manufacturer 0x02d0, product 0xa9a6 at sdmmc0 function 3 not configured
uhub2 at uhub1 port 1 configuration 1 interface 0 "GenesysLogic USB2.1 Hub" rev 2.10/6.63 addr 3
uhub3 at uhub2 port 1 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/2.00 addr 4
ure0 at uhub3 port 1 configuration 1 interface 0 "Realtek USB 10/100/1000 LAN" rev 2.10/32.01 addr 5
ure0: , unknown ver 6400, address [_MAC_XXXXXXXXXX]
rgephy0 at ure0 phy 0: RTL8251, rev. 0
uaudio0 at uhub3 port 3 configuration 1 interface 1 "Logitech HD Webcam C615" rev 2.00/0.11 addr 6
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio0 at uaudio0
uvideo0 at uhub3 port 3 configuration 1 interface 2 "Logitech HD Webcam C615" rev 2.00/0.11 addr 6
video0 at uvideo0
uhub4 at uhub3 port 4 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/2.00 addr 7
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/5.03 addr 8
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/5.03 addr 8
uhidev1: iclass 3/1, 11 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
ucc0 at uhidev1 reportid 3: 767 usages, 20 keys, array
wskbd1 at ucc0 mux 1
wskbd1: connecting to wsdisplay0
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 11: input=2, output=0, feature=0
uhidev2 at uhub4 port 1 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/5.03 addr 8
uhidev2: iclass 3/0, 17 report ids
uhidpp0 at uhidev2 device 1 mouse "MX Anywhere 38", device 2 mouse "MX Anywhere 38", device 3 mouse "MX Anywhere 38", device 4 keyboard "MX KEYS S"
uhidev3 at uhub4 port 1 configuration 1 interface 3 "Logitech USB Receiver" rev 2.00/5.03 addr 8
uhidev3: iclass 3/0, 42 report ids
uhid2 at uhidev3 reportid 40: input=28, output=0, feature=0
uhid3 at uhidev3 reportid 41: input=0, output=0, feature=1
uhid4 at uhidev3 reportid 42: input=0, output=0, feature=255
uhidev4 at uhub4 port 2 configuration 1 interface 0 "Yubico YubiKey OTP+FIDO+CCID" rev 2.00/5.43 addr 9
uhidev4: iclass 3/1
ukbd1 at uhidev4: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev5 at uhub4 port 2 configuration 1 interface 1 "Yubico YubiKey OTP+FIDO+CCID" rev 2.00/5.43 addr 9
uhidev5: iclass 3/0
fido0 at uhidev5: input=64, output=64, feature=0
ugen0 at uhub4 port 2 configuration 1 "Yubico YubiKey OTP+FIDO+CCID" rev 2.00/5.43 addr 9
uhidev6 at uhub4 port 3 configuration 1 interface 0 "Realtek HID Device" rev 2.01/1.01 addr 10
uhidev6: iclass 3/0
uhid5 at uhidev6: input=192, output=192, feature=0
ugen1 at uhub3 port 5 "Realtek BillBoard Device" rev 2.01/1.01 addr 11
uhidev7 at uhub3 port 6 configuration 1 interface 0 "Realtek HID Device" rev 2.01/1.01 addr 12
uhidev7: iclass 3/0
uhid6 at uhidev7: input=192, output=192, feature=0
uftdi0 at uhub1 port 4 configuration 1 interface 0 "FTDI FT232R USB UART" rev 2.00/6.00 addr 13
ucom0 at uftdi0 portno 1: usb0.1.00004.0
uhub5 at uhub0 port 2 configuration 1 interface 0 "GenesysLogic USB3.1 Hub" rev 3.20/6.63 addr 14
umass0 at uhub0 port 3 configuration 1 interface 0 "Gen2 10GBbps AS2360" rev 3.20/1.00 addr 15
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Argon, Forty, 0> serial.174c2362000000000F03
sd1: 953869MB, 512 bytes/sector, 1953525168 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (f186be1780060196.a) swap on sd0b dump on sd0b
WARNING: CHECK AND RESET THE DATE!
gpio0 at bcmgpio0: 58 pins
"bootloader" at mainbus0 not configured
bwfm0: address [_MAC_XXXXXXXXXX]
uaudio1 at uhub3 port 2 configuration 1 interface 1 "Jieli Technology UACDemoV1.0" rev 1.10/1.00 addr 16
uaudio1: class v1, full-speed, sync, channels: 2 play, 0 rec, 3 ctls
audio1 at uaudio1
uhidev8 at uhub3 port 2 configuration 1 interface 2 "Jieli Technology UACDemoV1.0" rev 1.10/1.00 addr 16
uhidev8: iclass 3/0
ucc1 at uhidev8: hid error 1

All comments/news/posts are the property of their individual owner and is presented without warranty of suitability, and solely as an informational resource.
This site Copyright © 2004-2024 NYC*BUG.