Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-12-18 15:56:53
From: tsutsui
Description: NetBSD/i386 10.1 on ASRock M3A UCC
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 3583 MB
avail memory = 3494 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000FBD70 000014 (v00 ACPIAM)
ACPI: RSDT 0x00000000DFFA0000 000044 (v01 082611 RSDT1651 20110826 MSFT 00000097)
ACPI: FACP 0x00000000DFFA0200 000084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097)
ACPI: DSDT 0x00000000DFFA0450 004764 (v01 AS379 AS379133 00000133 INTL 20051117)
ACPI: FACS 0x00000000DFFB0000 000040
ACPI: APIC 0x00000000DFFA0390 00007C (v01 082611 APIC1651 20110826 MSFT 00000097)
ACPI: MCFG 0x00000000DFFA0410 00003C (v01 082611 OEMMCFG 20110826 MSFT 00000097)
ACPI: OEMB 0x00000000DFFB0040 000072 (v01 082611 OEMB1651 20110826 MSFT 00000097)
ACPI: SRAT 0x00000000DFFAA450 0000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: AAFT 0x00000000DFFAA540 000027 (v01 082611 OEMAAFT 20110826 MSFT 00000097)
ACPI: HPET 0x00000000DFFAA570 000038 (v01 082611 OEMHPET 20110826 MSFT 00000097)
ACPI: SSDT 0x00000000DFFAA5B0 00088C (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x21, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use mfence to serialize rdtsc
cpu0: AMD Phenom(tm) II X4 955 Processor, id 0x100f43
cpu0: node 0, package 0, core 0, smt 0
cpu0: searching errata for cpu revision 0x00100f43
cpu1 at mainbus0 apid 1
cpu1: AMD Phenom(tm) II X4 955 Processor, id 0x100f43
cpu1: node 0, package 0, core 1, smt 0
cpu2 at mainbus0 apid 2
cpu2: AMD Phenom(tm) II X4 955 Processor, id 0x100f43
cpu2: node 0, package 0, core 2, smt 0
cpu3 at mainbus0 apid 3
cpu3: AMD Phenom(tm) II X4 955 Processor, id 0x100f43
cpu3: node 0, package 0, core 3, smt 0
acpi0 at mainbus0: Intel ACPICA 20221020
acpi0: X/RSDT: OemId <082611,RSDT1651,20110826>, AslId <MSFT,00000097>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
COPR (PNP0C04) at acpi0 not configured
FDC (PNP0700) at acpi0 not configured
LPTE (PNP0400) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
UAR1 (PNP0501) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 4 GPEs in block 00 to 1F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: ATI Technologies product 5951 (rev. 0x01)
ppb0 at pci0 dev 2 function 0: ATI Technologies RS480 PCI Express Root Port (rev. 0x00)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
nouveau0 at pci1 dev 0 function 0: NVIDIA GeForce GT 710 (rev. 0xa1)
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 19
hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 4, 64-bit
hdafg0 at hdaudio0: NVIDIA product 0051
hdafg0: DP00 8ch: Digital Out [Jack]
hdafg0: DP01 8ch: Digital Out [Jack]
hdafg0: 8ch/0ch 48000Hz PCM16*
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
ppb1 at pci0 dev 4 function 0: ATI Technologies RS480 PCI Express Bridge (rev. 0x00)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x2 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
xhci0 at pci2 dev 0 function 0: Renesas Technologies uPD720201 USB 3.0 Host Controller (rev. 0x03)
xhci0: 64-bit DMA - limited
xhci0: interrupting at ioapic0 pin 16
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
ppb2 at pci0 dev 5 function 0: ATI Technologies RS480 PCI Express Bridge (rev. 0x00)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x2 @ 2.5GT/s
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06)
re0: interrupting at ioapic0 pin 17
re0: RTL8168E/8111E (0x2c00)
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8211D 1000BASE-T media interface
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ahcisata0 at pci0 dev 18 function 0: ATI Technologies SB600 SATA Controller (rev. 0x00)
ahcisata0: ignoring broken port multiplier support
ahcisata0: ignoring broken NCQ support
ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP 0xb3209f83<CCCS,PMD,ISS=0x2=Gen2,SCLO,SAL,SMPS,SSNTF,S64A>
ahcisata0: interrupting at ioapic0 pin 22
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
ohci0 at pci0 dev 19 function 0: ATI Technologies SB600 USB OHCI0 Controller (rev. 0x00)
ohci0: interrupting at ioapic0 pin 16
ohci0: OHCI version 1.0, legacy support
usb2 at ohci0: USB revision 1.0
ohci1 at pci0 dev 19 function 1: ATI Technologies SB600 USB OHCI1 Controller (rev. 0x00)
ohci1: interrupting at ioapic0 pin 17
ohci1: OHCI version 1.0, legacy support
usb3 at ohci1: USB revision 1.0
ohci2 at pci0 dev 19 function 2: ATI Technologies SB600 USB OHCI2 Controller (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb4 at ohci2: USB revision 1.0
ohci3 at pci0 dev 19 function 3: ATI Technologies SB600 USB OHCI3 Controller (rev. 0x00)
ohci3: interrupting at ioapic0 pin 17
ohci3: OHCI version 1.0, legacy support
usb5 at ohci3: USB revision 1.0
ohci4 at pci0 dev 19 function 4: ATI Technologies SB600 USB OHCI4 Controller (rev. 0x00)
ohci4: interrupting at ioapic0 pin 18
ohci4: OHCI version 1.0, legacy support
usb6 at ohci4: USB revision 1.0
ehci0 at pci0 dev 19 function 5: ATI Technologies SB600 USB EHCI Controller (rev. 0x00)
ehci0: 32-bit DMA
ehci0: applying AMD SB600/SB700 USB freeze workaround
ehci0: interrupting at ioapic0 pin 19
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: 5 companion controllers, 2 ports each: ohci0 ohci1 ohci2 ohci3 ohci4
ehci0: Using DMA subregion for control data structures
usb7 at ehci0: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: ATI Technologies SBx00 SMBus Controller (rev. 0x13)
piixpm0: interrupting at SMI,
iic0 at piixpm0 port 0: I2C bus
ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 0x00)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to compatibility mode
ixpide0: primary channel interrupting at ioapic0 pin 14
atabus4 at ixpide0 channel 0
ixpide0: secondary channel configured to compatibility mode
ixpide0: secondary channel interrupting at ioapic0 pin 15
atabus5 at ixpide0 channel 1
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg1 at hdaudio1: VIA VT1708S
hdafg1: DAC00 2ch: Speaker [Jack]
hdafg1: ADC01 2ch: CD [Built-In], Line In [Jack], Mic In [Jack]
hdafg1: 2ch/2ch 48000Hz PCM16*
audio1 at hdafg1: playback, capture, full duplex, independent
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
pcib0 at pci0 dev 20 function 3: ATI Technologies SB600 PCI to LPC Bridge (rev. 0x00)
ppb3 at pci0 dev 20 function 4: ATI Technologies SBx00 PCI to PCI Bridge (rev. 0x00)
pci4 at ppb3 bus 3
pci4: i/o space, memory space enabled
ohci5 at pci4 dev 5 function 0: NEC USB Host Controller (rev. 0x43)
ohci5: interrupting at ioapic0 pin 20
ohci5: OHCI version 1.0
usb8 at ohci5: USB revision 1.0
ohci6 at pci4 dev 5 function 1: NEC USB Host Controller (rev. 0x43)
ohci6: interrupting at ioapic0 pin 21
ohci6: OHCI version 1.0
usb9 at ohci6: USB revision 1.0
ehci1 at pci4 dev 5 function 2: NEC USB2 Host Controller (rev. 0x04)
ehci1: 32-bit DMA
ehci1: interrupting at ioapic0 pin 22
ehci1: EHCI version 1.0
ehci1: 2 companion controllers, 2 ports each: ohci5 ohci6
ehci1: Using DMA subregion for control data structures
usb10 at ehci1: USB revision 2.0
re1 at pci4 dev 5 function 3: RealTek 8169/8110 Gigabit Ethernet (rev. 0x10)
re1: interrupting at ioapic0 pin 20
re1: RTL8169S (0x0400)
re1: Ethernet address [_MAC_XXXXXXXXXX]
re1: using 256 tx descriptors
rgephy1 at re1 phy 7: RTL8211 1000BASE-T media interface
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
puc0 at pci4 dev 6 function 0: Avlab Low Profile PCI 4 Serial (com, com, com, com)
com3 at puc0 port 0 (16550-compatible): ioaddr 0xd400, interrupting at ioapic0 pin 21
com3: ns16550a, 16-byte FIFO
com4 at puc0 port 1 (16550-compatible): ioaddr 0xd000, interrupting at ioapic0 pin 21
com4: ns16550a, 16-byte FIFO
com5 at puc0 port 2 (16550-compatible): ioaddr 0xc800, interrupting at ioapic0 pin 21
com5: ns16550a, 16-byte FIFO
com6 at puc0 port 3 (16550-compatible): ioaddr 0xc400, interrupting at ioapic0 pin 21
com6: ns16550a, 16-byte FIFO
puc1 at pci4 dev 7 function 0: Avlab Low Profile PCI 4 Serial (com, com, com, com)
com7 at puc1 port 0 (16550-compatible): ioaddr 0xc000, interrupting at ioapic0 pin 22
com7: ns16550a, 16-byte FIFO
com8 at puc1 port 1 (16550-compatible): ioaddr 0xb800, interrupting at ioapic0 pin 22
com8: ns16550a, 16-byte FIFO
com9 at puc1 port 2 (16550-compatible): ioaddr 0xb400, interrupting at ioapic0 pin 22
com9: ns16550a, 16-byte FIFO
com10 at puc1 port 3 (16550-compatible): ioaddr 0xb000, interrupting at ioapic0 pin 22
com10: ns16550a, 16-byte FIFO
pchb1 at pci0 dev 24 function 0: AMD AMD64 Family10h HyperTransport Configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 1: AMD AMD64 Family10h Address Map Configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 2: AMD AMD64 Family10h DRAM Configuration (rev. 0x00)
amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family10h)
pchb4 at pci0 dev 24 function 4: AMD AMD64 Family10h Link Configuration (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: P0: FFH, lat 4 us, pow 26040 mW, 3200 MHz
acpicpu0: P1: FFH, lat 4 us, pow 19240 mW, 2500 MHz
acpicpu0: P2: FFH, lat 4 us, pow 15960 mW, 2000 MHz
acpicpu0: P3: FFH, lat 4 us, pow 7935 mW, 800 MHz
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
ohci4: 1 scheduling overruns
WARNING: system needs entropy for security; see entropy(7)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3200890000 Hz quality 3000
uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 4 ports with 4 removable, self powered
uhub2 at usb2: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb4: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub4 at usb3: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb8: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb5: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub7: 2 ports with 2 removable, self powered
uhub8 at usb9: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub8: 2 ports with 2 removable, self powered
uhub9 at usb7: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub9: 10 ports with 10 removable, self powered
IPsec: Initialized Security Association Processing.
uhub10 at usb10: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub10: 4 ports with 4 removable, self powered
ahcisata0 port 2: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 3: device present, speed: 3.0Gb/s
uhub11 at uhub1 port 3: vendor 05e3 (0x05e3) USB2.0 Hub (0x0606), class 9/0, rev 2.00/7.02, addr 1
uhub11: single transaction translator
uhub11: 4 ports with 4 removable, self powered
wd0 at atabus0 drive 0
wd0: <WDC WDS200T1R0A-68A4W0>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0
wd1: <WDC WDS200T1R0A-68A4W0>
wd1: drive supports 1-sector PIO transfers, LBA48 addressing
wd1: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd1: drive supports PIO mode 4uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech (0x046d) USB Laser Mouse (0xc061), rev 2.00/56.00, addr 2, iclass 3/1
, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus2 drive 0
wd2: <Samsung SSD 870 QVO 2TB>
wd2: drive supports 1-sector PIO transfers, LBA48 addressing
wd2: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd2(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), WRITE DMA FUA EXT
wd3 at atabus3 drive 0
wd3: <Samsung SSD 860 EVO 500GB>
wd3: drive supports 1-sector PIO transfers, LBA48 addressing
wd3: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
ums0 at uhidev0: 8 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd3(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), WRITE DMA FUA EXT
uhidev1 at uhub2 port 2 configuration 1 interface 0
uhidev1: Logitech (0x046d) USB Receiver (0xc534), rev 2.00/29.01, addr 3, iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
uhidev2 at uhub2 port 2 configuration 1 interface 1
uhidev2: Logitech (0x046d) USB Receiver (0xc534), rev 2.00/29.01, addr 3, iclass 3/1
uhidev2: 17 report ids
ums1 at uhidev2 reportid 2: 16 buttons, W and Z dirs
wsmouse1 at ums1 mux 0
uhid0 at uhidev2 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev2 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid3 at uhidev2 reportid 17: input=19, output=19, feature=0
atapibus0 at atabus4: 2 targets
cd0 at atapibus0 drive 0: <SONY CD-RW CRX160E, , 1.0g> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
swwdog0: software watchdog initialized
entropy: best effort
raid0: RAID Level 1
raid0: Components: /dev/wd0a /dev/wd1a
raid0: Total Sectors: 3907028992 (1907729 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
kern.module.path=/stand/i386/10.1/modules
nouveau0: NVIDIA GK208B (b060b0b1)
nouveau0: bios: version 80.28.a6.00.5f
nouveau0: interrupting at ioapic0 pin 18 (nouveau0)
nouveau0: fb: 2048 MiB DDR3
Zone kernel: Available graphics memory: 1533080 KiB
nouveau0: DRM: VRAM: 2048 MiB
nouveau0: DRM: GART: 1048576 MiB
nouveau0: DRM: TMDS table version 2.0
nouveau0: DRM: DCB version 4.0
nouveau0: DRM: DCB outp 00: 01000f02 00020030
nouveau0: DRM: DCB outp 01: 02011f62 00020010
nouveau0: DRM: DCB outp 02: 02022f10 00000000
nouveau0: DRM: DCB conn 00: 00001031
nouveau0: DRM: DCB conn 01: 00002161
nouveau0: DRM: DCB conn 02: 00000200
nouveau0: DRM: MM: using COPY for buffer copies
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveaufb0 at nouveau0
[drm] Initialized nouveau 1.3.1 20120801 for nouveau0 on minor 0
nouveaufb0: framebuffer at 0xf00c0000, size 1920x1200, depth 32, stride 7680
wsdisplay0 at nouveaufb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wskbd1: connecting to wsdisplay0
lm0 at isa0 port 0x290-0x297
lm0: Using default temp sensors
lm0: Winbond unknown-model Hardware monitor
entropy: ready
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)