Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-01-15 10:34:19
From: tsutsui
Description: NetBSD/i386 10.1 on QEMU (virtio-pci)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 1023 MB
avail memory = 981 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000F5290 000014 (v00 BOCHS )
ACPI: RSDT 0x000000003FFE22E6 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
ACPI: FACP 0x000000003FFE219A 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
ACPI: DSDT 0x000000003FFE0040 00215A (v01 BOCHS BXPC 00000001 BXPC 00000001)
ACPI: FACS 0x000000003FFE0000 000040
ACPI: APIC 0x000000003FFE220E 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001)
ACPI: HPET 0x000000003FFE2286 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
ACPI: WAET 0x000000003FFE22BE 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: QEMU Virtual CPU version 2.5+, id 0x663
cpu0: node 0, package 0, core 0, smt 0
acpi0 at mainbus0: Intel ACPICA 20221020
acpi0: X/RSDT: OemId <BOCHS ,BXPC ,00000001>, AslId <BXPC,00000001>
LNKS: ACPI: Found matching pin for 0.1.INTA at func 3: 9
LNKC: ACPI: Found matching pin for 0.3.INTA at func 0: 11
LNKD: ACPI: Found matching pin for 0.4.INTA at func 0: 11
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 100000000 Hz quality 2000
qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b
qemufwcfg0: <QEMU>
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12
FDC0 (PNP0700) at acpi0 not configured
LPT1 (PNP0400) at acpi0 not configured
COM1 (PNP0501) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 2 GPEs in block 00 to 0F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel 82441FX (PMC) PCI and Memory Controller (rev. 0x02)
pcib0 at pci0 dev 1 function 0: Intel 82371SB (PIIX3) PCI-ISA Bridge (rev. 0x00)
piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
piixpm0 at pci0 dev 1 function 3: Intel 82371AB (PIIX4) Power Management Controller (rev. 0x03)
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 1000
piixpm0: 24-bit timer
piixpm0: interrupting at ioapic0 pin 9
iic0 at piixpm0 port 0: I2C bus
vga0 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
drm at vga0 not configured
virtio0 at pci0 dev 3 function 0
virtio0: network device (id 1, rev. 0x00)
vioif0 at virtio0: features: 0x31870020<EVENT_IDX,INDIRECT_DESC,NOTIFY_ON_EMPTY,CTRL_MAC,CTRL_RX,CTRL_VQ,STATUS,MAC>
vioif0: Ethernet address [_MAC_XXXXXXXXXX]
virtio0: allocated 20480 byte for virtqueue 0 for rx0, size 256
virtio0: using 8192 byte (512 entries) indirect descriptors
virtio0: allocated 20480 byte for virtqueue 1 for tx0, size 256
virtio0: using 8192 byte (512 entries) indirect descriptors
virtio0: allocated 8192 byte for virtqueue 2 for control, size 64
virtio0: config interrupting at msix0 vec 0
virtio0: queues interrupting at msix0 vec 1
virtio1 at pci0 dev 4 function 0
virtio1: block device (id 2, rev. 0x00)
ld0 at virtio1: features: 0x10000a54<INDIRECT_DESC,CONFIG_WCE,FLUSH,BLK_SIZE,GEOMETRY,SEG_MAX>
ld0: Unknown SIZE_MAX, assuming 65536
ld0: max 254 segs of max 65536 bytes
virtio1: allocated 1060864 byte for virtqueue 0 for I/O request, size 256
virtio1: using 1048576 byte (65536 entries) indirect descriptors
virtio1: config interrupting at msix1 vec 0
virtio1: queues interrupting at msix1 vec 1
ld0: 5120 MB, 10402 cyl, 16 head, 63 sec, 512 bytes/sect x 10485760 sectors
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO
com0: console
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer0: attached to pcppi0
isapnp0: no ISA Plug 'n Play devices found
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
vmt0 at cpu0
vmt0: UUID: 00000000-0000-0000-0000-000000000000
vmware: open failed, eax=0xffffffff, ecx=0x1e, edx=0x5658
vmt0: autoconfiguration error: failed to open backdoor RPC channel (TCLO protocol)
WARNING: system needs entropy for security; see entropy(7)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
IPsec: Initialized Security Association Processing.
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <QEMU DVD-ROM, QM00003, 2.5+> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA)
swwdog0: software watchdog initialized
WARNING: 1 error while detecting hardware; check system log.
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
kern.module.path=/stand/i386/10.1/modules
entropy: best effort