Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2025-01-15 11:17:53
From: tsutsui
Description: NetBSD/alpha 10.1 on QEMU (21264A)
[ Kernel symbol table missing! ]
consinit: not using prom console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
    2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
    2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
    2024
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024
	[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/alpha/compile/GENERIC
6600 family, unknown model variation 0x1400, 250MHz, s/n QEMU
8192 byte page size, 1 processor.
total memory = 128 MB
(120 KB reserved for PROM, 127 MB used by NetBSD)
avail memory = 112 MB
timecounter: Timecounters tick every 0.976 msec
Kernelized RAIDframe activated
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21264A-0 (EV67)
cpu0: Architecture extensions: 0x1307<PMI,PAT,MVI,CIX,FIX,BWX>
qemu0 at mainbus0: Qemu virtual machine services
timecounter: Timecounter "Qemu" frequency 1000000000 Hz quality 3000
tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0
tsc0: 2 Dchips, 1 memory bus of 16 bytes
tsc0: arrays present: 0MB, 0MB, 0MB, 0MB, Dchip 0 rev 0
tsp0 at tsc0
pci0 at tsp0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vga0 at pci0 dev 1 function 0: Cirrus Logic CL-GD5446 (rev. 0x00)
wsdisplay1 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay1
drm at vga0 not configured
wm0 at pci0 dev 2 function 0, 64-bit DMA: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03)
wm0: interrupting at dec 6600 irq 12
wm0: 32-bit 33MHz PCI bus
wm0: 64 words (6 address bits) MicroWire EEPROM
wm0: RX packet buffer size: 48KB
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: 0x200002<LOCK_EECD,WOL>
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0
makphy0: Failed to access EADR. Are you an emulator?
makphy0: Failed to read EXTSR. Are you an emulator?. Regard as 1000BASE-T.
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
cmdide0 at pci0 dev 3 function 0: CMD Technology PCI0646 (rev. 0x07)
cmdide0: bus-master DMA support present
cmdide0: primary channel configured to native-PCI mode, channel non-independent
cmdide0: using dec 6600 irq 16 for native-PCI interrupt
atabus0 at cmdide0 channel 0
cmdide0: secondary channel configured to native-PCI mode, channel non-independent
cmdide0: secondary channel ignored (disabled)
sio0 at pci0 dev 7 function 0: Intel 82378ZB System I/O (rev. 0x03)
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay1
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
spkr0 at pcppi0: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi0: PC speaker
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
attimer0: attached to pcppi0
tsciic0 at tsc0
iic0 at tsciic0: I2C bus
WARNING: system needs entropy for security; see entropy(7)
Using the Qemu CPU alarm for 50 Hz hardclock.
timecounter: Timecounter "clockinterrupt" frequency 50 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: 1.44MB, 80 cyl, 2 head, 18 sec
wd0 at atabus0 drive 0
wd0: <QEMU HARDDISK>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 1280 MB, 2600 cyl, 16 head, 63 sec, 512 bytes/sect x 2621440 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(cmdide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
swwdog0: software watchdog initialized
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/alpha/10.1/modules
entropy: best effort