Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-01-15 17:19:12
From: tsutsui
Description: NetBSD/macppc 10.1 on QEMU (mac99)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/macppc/compile/GENERIC
total memory = 256 MB
avail memory = 225 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
found heathrow PIC at 81080000
bootpath: /pci@80000000/mac-io@10/ata-3@20000/disk@0:/netbsd
mainbus0 (root)
cpu0 at mainbus0: 750 (Revision 3.1), ID 0 (primary)
cpu0: HID0 0x805000a4<EMCP,NAP,DPM,SGE,BTIC,BHT>, powersave: 1
cpu0: 0.00 MHz L2 cache present but not enabled
memory0 at mainbus0
grackle0 at mainbus0
pci0 at grackle0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Motorola MPC106 "Grackle" Host Bridge (rev. 0x00)
pchb0: L2 cache: 256K, uniprocessor/none mode
genfb0 at pci0 dev 1 function 0: vendor 1234 product 1111 (rev. 0x02)
wm0 at pci0 dev 2 function 0, 32-bit DMA: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03)
wm0: interrupting at irq 23
wm0: 32-bit 33MHz PCI bus
wm0: 64 words (6 address bits) MicroWire EEPROM
wm0: RX packet buffer size: 48KB
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: 0x200002<LOCK_EECD,WOL>
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0
makphy0: Failed to access EADR. Are you an emulator?
makphy0: Failed to read EXTSR. Are you an emulator?. Regard as 1000BASE-T.
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
obio0 at pci0 dev 16 function 0: addr 0x81080000
cuda0 at obio0 offset 0x16000 irq 18
nadb0 at cuda0: Apple Desktop Bus
iic0 at cuda0: I2C bus
nvram0 at obio0 offset 0x60000
zsc0 at obio0 irq 15,16
zstty0 at zsc0 channel 0 (console i/o)
zstty1 at zsc0 channel 1
wdc0 at obio0 offset 0x20000 irq 13, edge triggered: DMA transfer
atabus0 at wdc0 channel 0
wdc1 at obio0 offset 0x21000 irq 14, edge triggered: DMA transfer
atabus1 at wdc1 channel 0
vmmask 7e000000 schedmask 7e000000 highmask 7e000000
WARNING: system needs entropy for security; see entropy(7)
timecounter: Timecounter "mftb" frequency 16600000 Hz quality 100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
IPsec: Initialized Security Association Processing.
adbkbd0 at nadb0 addr 2: mapped device (0)
wd0 at atabus0 drive 0
wd0: <QEMU HARDDISK>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 5120 MB, 10402 cyl, 16 head, 63 sec, 512 bytes/sect x 10485760 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
wskbd0 at adbkbd0 mux 1
wsmouse0 at adbkbd0 mux 0
adbms0 at nadb0 addr 3: relative positioning device (mouse?) (0)
wsmouse1 at adbms0 mux 0
swwdog0: software watchdog initialized
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/macppc/10.1/modules
entropy: best effort