Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-01-18 01:46:44
From: ltning
Description: Dual Pentium Pro with PII Overdrive
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.0_STABLE (PPRO) #0: Fri Nov 29 22:29:37 CET 2024 [ 1.000000] ltning@motherfucker:/usr/home/ltning/github/NetBSD/obj/sys/arch/i386/compile/PPRO [ 1.000000] total memory = 511 MB [ 1.000000] avail memory = 486 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.000004] mainbus0 (root) [ 1.000004] mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000) [ 1.000004] cpu0 at mainbus0 apid 1 [ 1.000004] ACPI Error: AE_BAD_PARAMETER, Thread 3236564992 could not acquire Mutex [ACPI_MTX_Tables] (0x2) (20221020/utmutex-326) [ 1.000004] cpu0: Use cpuid to serialize rdtsc [ 1.000004] cpu0: Intel 686-class, 328MHz, id 0x1632 [ 1.000004] cpu0: node 0, package 0, core 0, smt 0 [ 1.000004] cpu1 at mainbus0 apid 0 [ 1.000004] cpu1: Intel 686-class, id 0x1632 [ 1.000004] cpu1: node 0, package 0, core 0, smt 0 [ 1.000004] mpbios: bus 0 is type PCI [ 1.000004] mpbios: bus 1 is type ISA [ 1.000004] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x11, 24 pins [ 1.000004] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.000004] pci0: This pci host supports neither MSI nor MSI-X. [ 1.000004] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.000004] pchb0 at pci0 dev 0 function 0: Intel 82441FX (PMC) PCI and Memory Controller (rev. 0x02) [ 1.000004] pcib0 at pci0 dev 1 function 0: Intel 82371SB (PIIX3) PCI-ISA Bridge (rev. 0x01) [ 1.000004] piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) [ 1.000004] piixide0: bus-master DMA support present [ 1.000004] piixide0: primary channel wired to compatibility mode [ 1.000004] piixide0: primary channel interrupting at ioapic0 pin 14 [ 1.000004] atabus0 at piixide0 channel 0 [ 1.000004] piixide0: secondary channel wired to compatibility mode [ 1.000004] piixide0: secondary channel interrupting at ioapic0 pin 15 [ 1.000004] atabus1 at piixide0 channel 1 [ 1.000004] satalink0 at pci0 dev 9 function 0: Silicon Image SATALink 3112 (rev. 0x02) [ 1.000004] satalink0: SATALink BA5 register space disabled [ 1.000004] satalink0: bus-master DMA support present [ 1.000004] satalink0: primary channel wired to native-PCI mode [ 1.000004] satalink0: using ioapic0 pin 19 for native-PCI interrupt [ 1.000004] atabus2 at satalink0 channel 0 [ 1.000004] satalink0: secondary channel wired to native-PCI mode [ 1.000004] atabus3 at satalink0 channel 1 [ 1.000004] ex0 at pci0 dev 10 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x74) [ 1.000004] ex0: interrupting at ioapic0 pin 18 [ 1.000004] ex0: MAC address [_MAC_XXXXXXXXXX] [ 1.000004] bmtphy0 at ex0 phy 24: Broadcom 3c905C internal PHY, rev. 6 [ 1.000004] bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000004] ohci0 at pci0 dev 11 function 0: Opti 82C861 (rev. 0x10) [ 1.000004] ohci0: interrupting at ioapic0 pin 17 [ 1.000004] ohci0: OHCI version 1.0, legacy support [ 1.000004] usb0 at ohci0: USB revision 1.0 [ 1.000004] ahc1 at pci0 dev 12 function 0: Adaptec 2940 Ultra SCSI adapter [ 1.000004] ahc1: interrupting at ioapic0 pin 16 [ 1.000004] ahc1: aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs [ 1.000004] scsibus0 at ahc1: 8 targets, 8 luns per target [ 1.000004] radeon0 at pci0 dev 13 function 0: ATI Technologies Radeon 9200SE 5964 (rev. 0x01) [ 1.000004] radeon0: autoconfiguration error: unable to reserve VGA registers for i386 radeondrmkms hack [ 1.000004] isa0 at pcib0 [ 1.000004] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO [ 1.000004] pckbc0 at isa0 port 0x60-0x64 [ 1.000004] pckbd0 at pckbc0 (kbd slot) [ 1.000004] pckbc0: using irq 1 for kbd slot [ 1.000004] wskbd0 at pckbd0: console keyboard [ 1.000004] pms0 at pckbc0 (aux slot) [ 1.000004] pckbc0: using irq 12 for aux slot [ 1.000004] wsmouse0 at pms0 mux 0 [ 1.000004] attimer0 at isa0 port 0x40-0x43 [ 1.000004] gus0 at isa0 port 0x240-0x24f irq 5 drq 5: CS4231A [ 1.000004] gus0: Gravis UltraSound MAX, 1024KB memory [ 1.000004] audio0 at gus0: playback, capture, half duplex [ 1.000004] audio0: slinear_le:16 2ch 44100Hz, blk 2048 bytes (11.6ms) for playback [ 1.000004] audio0: slinear_le:16 2ch 44100Hz, blk 2048 bytes (11.6ms) for recording [ 1.000004] pcppi0 at isa0 port 0x61 [ 1.000004] midi0 at pcppi0: PC speaker [ 1.000004] sysbeep0 at pcppi0 [ 1.000004] isapnp0 at isa0 port 0x279 [ 1.000004] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.000004] attimer0: attached to pcppi0 [ 1.000004] isapnp0: read port 0x203 [ 1.000004] isapnp0: <Creative SB AWE64 Gold, CTL0044, , Audio> port 0x220/16,0x300/2,0x388/4 irq 7 drq 0,6 not configured [ 1.000004] joy0 at isapnp0 port 0x200/8 [ 1.000004] joy0: Creative SB AWE64 Gold Game [ 1.000004] joy0: joystick not connected [ 1.000004] isapnp0: <Creative SB AWE64 Gold, CTL0023, , WaveTable> port 0x620/4 not configured [ 1.000004] WARNING: system needs entropy for security; see entropy(7) [ 1.000004] cpu_topology_init: info bogus, faking it [ 1.000004] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.225941] satalink0: port 0: device present, speed: 1.5Gb/s [ 1.326132] satalink0: autoconfiguration error: port 1: device connected, but communication not established [ 1.326132] scsibus0: waiting 2 seconds for devices to settle... [ 1.326132] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.326132] uhub0: 2 ports with 2 removable, self powered [ 4.321832] wd0 at atabus0 drive 0 [ 4.321832] wd0: <iCF 1SE3> [ 4.321832] wd0: drive supports 1-sector PIO transfers, LBA48 addressing [ 4.321832] wd0: 7641 MB, 15525 cyl, 16 head, 63 sec, 512 bytes/sect x 15649200 sectors [ 4.331858] wd0: 32-bit data port [ 4.331858] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100), WRITE DMA FUA [ 4.331858] wd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA), WRITE DMA FUA EXT [ 4.331858] wd1 at atabus2 drive 0 [ 4.341874] wd1: <NT-256 2242> [ 4.341874] wd1: drive supports 1-sector PIO transfers, LBA48 addressing [ 4.341874] wd1: 238 GB, 496149 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 sectors [ 4.361910] wd1: 32-bit data port [ 4.361910] wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) [ 4.361910] wd1(satalink0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA), WRITE DMA FUA EXT [ 7.006938] swwdog0: software watchdog initialized [ 7.016957] WARNING: 2 errors while detecting hardware; check system log. [ 7.016957] boot device: wd0 [ 7.016957] root on wd0a dumps on wd0b [ 7.016957] root file system type: ffs [ 7.026977] kern.module.path=/stand/i386/10.0/modules [ 7.026977] [drm] initializing kernel modesetting (RV280 0x1002:0x5964 0x148C:0x2074 0x01). [ 7.026977] [drm] register mmio base: 0xcd000000 [ 7.026977] [drm] register mmio size: 65536 [ 7.026977] ACPI Error: AE_BAD_PARAMETER, Thread 3251599936 could not acquire Mutex [ACPI_MTX_Tables] (0x2) (20221020/utmutex-326) [ 7.026977] ACPI Error: Mutex [ACPI_MTX_Tables] (0x2) is not acquired, cannot release (20221020/utmutex-367) [ 7.057034] [drm] Generation 2 PCI interface, using max accessible memory [ 7.057034] radeon0: VRAM: 256M 0x00000000D0000000 - 0x00000000DFFFFFFF (128M used) [ 7.057034] radeon0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF [ 7.097113] [drm] Detected VRAM RAM=100M, BAR=256M [ 7.097113] [drm] RAM width 64bits DDR [ 7.097113] Zone kernel: Available graphics memory: 44392 KiB [ 7.097113] [drm] radeon: 128M of VRAM memory ready [ 7.097113] [drm] radeon: 512M of GTT memory ready. [ 7.097113] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 7.157229] [drm] PCI GART of 512M enabled (table at 0x0000000001B52000). [ 7.157229] radeon0: WB disabled [ 7.157229] radeon0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0x0xd9058000 [ 7.157229] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.157229] [drm] Driver supports precise vblank timestamp query. [ 7.157229] radeon0: interrupting at ioapic0 pin 19 (radeon0) [ 7.157229] [drm] radeon: irq initialized. [ 7.157229] [drm] Loading R200 Microcode [ 7.157229] entropy: best effort [ 7.177333] [drm] radeon: ring at 0x00000000B0001000 [ 7.177333] [drm] ring test succeeded in 0 usecs [ 7.197339] [drm] ib test succeeded in 0 usecs [ 7.197339] [drm] Radeon Display Connectors [ 7.197339] [drm] Connector 0: [ 7.197339] [drm] VGA-1 [ 7.197339] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 7.197339] [drm] Encoders: [ 7.197339] [drm] CRT1: INTERNAL_DAC1 [ 7.197339] [drm] Connector 1: [ 7.197339] [drm] DVI-I-1 [ 7.197339] [drm] HPD1 [ 7.197339] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 7.197339] [drm] Encoders: [ 7.197339] [drm] CRT2: INTERNAL_DAC2 [ 7.197339] [drm] DFP1: INTERNAL_TMDS1 [ 7.197339] [drm] Connector 2: [ 7.197339] [drm] SVIDEO-1 [ 7.197339] [drm] Encoders: [ 7.197339] [drm] TV1: INTERNAL_DAC2 [ 7.327549] radeondrmkmsfb0 at radeon0 [ 7.327549] [drm] Initialized radeon 2.50.0 20080528 for radeon0 on minor 0 [ 7.327549] radeondrmkmsfb0: framebuffer at 0xd0040000, size 1600x1200, depth 32, stride 6400 [ 7.939079] wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 [ 7.985999] wsmux1: connecting to wsdisplay0 [ 12.738206] [+] The CPU is not affected by TAA [ 12.738206] audio0: slinear_le:16 2ch 44100Hz, blk 20480 bytes (116ms) for playback [ 12.738206] audio0: slinear_le:16 2ch 44100Hz, blk 20480 bytes (116ms) for recording [ 55.559660] wsdisplay0: screen 1 added (default, vt100 emulation) [ 55.579698] wsdisplay0: screen 2 added (default, vt100 emulation) [ 55.599739] wsdisplay0: screen 3 added (default, vt100 emulation) [ 55.609758] wsdisplay0: screen 4 added (default, vt100 emulation) [ 152.885320] ex0: autoconfiguration error: transmit underrun (9000)autoconfiguration error: @20autoconfiguration error: , new threshold is 40autoconfiguration error: [ 152.885320] ex0: autoconfiguration error: transmit underrun (9000)autoconfiguration error: @40autoconfiguration error: , new threshold is 60autoconfiguration error: [ 175.278245] umass0 at uhub0 port 1 configuration 1 interface 0 [ 175.278245] umass0: Generic (0x058f) Flash Card Reader/Writer (0x6362), rev 2.00/1.00, addr 2 [ 175.278245] umass0: using SCSI over Bulk-Only [ 175.278245] scsibus1 at umass0: 2 targets, 4 luns per target [ 175.308301] sd0 at scsibus1 target 0 lun 0: <Generic-, Compact Flash, 1.01> disk removable [ 175.328339] sd0: drive offline [ 175.338361] sd1 at scsibus1 target 0 lun 1: <Generic-, SD/MMC, 1.00> disk removable [ 175.829300] sd1: fabricating a geometry [ 175.829300] sd1: 15193 MB, 15193 cyl, 64 head, 32 sec, 512 bytes/sect x 31116288 sectors [ 175.879397] sd1: fabricating a geometry [ 175.949529] sd1(umass0:0:0:1): Check Condition on CDB: 0x28 00 00 00 00 00 00 00 20 00 [ 175.949529] SENSE KEY: Not Ready [ 175.949529] COMMAND INFO: 11162880 (0xaa5500) [ 175.949529] ASC/ASCQ: ASC 0xff ASCQ 0xff [ 175.949529] FRU CODE: 0x1 [ 175.949529] sd1d: error reading fsbn 0 of 0-31 (sd1 bn 0; cn 0 tn 0 sn 0) [ 175.969569] sd2 at scsibus1 target 0 lun 2: <Generic-, MS/MS-PRO, 1.03> disk removable [ 175.979591] sd2: drive offline [ 175.989611] sd3 at scsibus1 target 0 lun 3: <Generic-, xD-Picture, 1.02> disk removable [ 175.999628] sd3: drive offline [ 196.999895] sd1: fabricating a geometry [ 197.060011] sd1(umass0:0:0:1): Check Condition on CDB: 0x28 00 00 00 00 00 00 00 03 00 [ 197.060011] SENSE KEY: Not Ready [ 197.060011] COMMAND INFO: 11162880 (0xaa5500) [ 197.060011] ASC/ASCQ: ASC 0xff ASCQ 0xff [ 197.060011] FRU CODE: 0x1 [ 197.070054] sd1d: error reading fsbn 0 of 0-2 (sd1 bn 0; cn 0 tn 0 sn 0) [ 200.336291] sd1: fabricating a geometry [ 290.719603] sd0: detached [ 290.729632] sd1: detached [ 290.739672] sd2: detached [ 290.749680] sd3: detached [ 290.749680] scsibus1: detached [ 290.789735] umass0: detached [ 290.789735] umass0: at uhub0 port 1 (addr 2) disconnected [ 674.637072] ex0: autoconfiguration error: transmit underrun (9000)autoconfiguration error: @60autoconfiguration error: [ 938.813628] umass0 at uhub0 port 1 configuration 1 interface 0 [ 938.813628] umass0: Generic (0x058f) Flash Card Reader/Writer (0x6362), rev 2.00/1.00, addr 2 [ 938.813628] umass0: using SCSI over Bulk-Only [ 938.813628] scsibus1 at umass0: 2 targets, 4 luns per target [ 938.843685] sd0 at scsibus1 target 0 lun 0: <Generic-, Compact Flash, 1.01> disk removable [ 938.863723] sd0: drive offline [ 938.873745] sd1 at scsibus1 target 0 lun 1: <Generic-, SD/MMC, 1.00> disk removable [ 939.945799] sd1: fabricating a geometry [ 939.945799] sd1: 60906 MB, 60906 cyl, 64 head, 32 sec, 512 bytes/sect x 124735488 sectors [ 939.985877] sd1: fabricating a geometry [ 940.076048] sd2 at scsibus1 target 0 lun 2: <Generic-, MS/MS-PRO, 1.03> disk removable [ 940.086075] sd2: drive offline [ 940.096092] sd3 at scsibus1 target 0 lun 3: <Generic-, xD-Picture, 1.02> disk removable [ 940.106108] sd3: drive offline [ 1386.802559] sd0: detached [ 1386.802559] sd1: detached [ 1386.802559] sd2: detached [ 1386.802559] sd3: detached [ 1386.802559] scsibus1: detached [ 1386.842635] umass0: detached [ 1386.842635] umass0: at uhub0 port 1 (addr 2) disconnected [ 2324.099754] ex0: autoconfiguration error: transmit underrun (9000)autoconfiguration error: @60autoconfiguration error: