Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-01-30 14:26:46
From: kagura1050
Description: NetBSD/i386 10.0 on FMV-BIBLO NCIII13
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.0 (GENERIC) #0: Thu Mar 28 08:33:33 UTC 2024 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC [ 1.000000] total memory = 97916 KB [ 1.000000] avail memory = 72448 KB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.000004] mainbus0 (root) [ 1.000004] Firmware Error (ACPI): A valid RSDP was not found (20221020/tbxfroot-275) [ 1.000004] autoconfiguration error: acpi_probe: failed to initialize tables [ 1.000004] ACPI Error: Could not remove SCI handler (20221020/evmisc-316) [ 1.000004] cpu0 at mainbus0 [ 1.000004] ACPI Error: AE_BAD_PARAMETER, Thread 3242924096 could not acquire Mutex [ACPI_MTX_Tables] (0x2) (20221020/utmutex-326) [ 1.000004] ACPI Error: Mutex [ACPI_MTX_Tables] (0x2) is not acquired, cannot release (20221020/utmutex-367) [ 1.000004] cpu0: Use cpuid to serialize rdtsc [ 1.000004] cpu0: Intel 586-class, 157MHz, id 0x544 [ 1.000004] cpu0: node 0, package 0, core 0, smt 0 [ 1.000004] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.000004] pci0: This pci host supports neither MSI nor MSI-X. [ 1.000004] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.000004] pchb0 at pci0 dev 0 function 0: Intel 82439TX (MTXC) System Controller (rev. 0x01) [ 1.000004] pcib0 at pci0 dev 1 function 0: Intel 82371AB (PIIX4) PCI-ISA Bridge (rev. 0x01) [ 1.000004] piixide0 at pci0 dev 1 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01) [ 1.000004] piixide0: bus-master DMA support present [ 1.000004] piixide0: primary channel wired to compatibility mode [ 1.000004] piixide0: primary channel interrupting at irq 14 [ 1.000004] atabus0 at piixide0 channel 0 [ 1.000004] piixide0: secondary channel wired to compatibility mode [ 1.000004] piixide0: secondary channel ignored (disabled) [ 1.000004] uhci0 at pci0 dev 1 function 2: Intel 82371AB (PIIX4) USB Host Controller (rev. 0x01) [ 1.000004] uhci0: interrupting at irq 9 [ 1.000004] usb0 at uhci0: USB revision 1.0 [ 1.000004] piixpm0 at pci0 dev 1 function 3: Intel 82371AB (PIIX4) Power Management Controller (rev. 0x01) [ 1.000004] timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 900 [ 1.009565] piixpm0: 24-bit timer [ 1.009565] piixpm0: interrupting at SMI, [ 1.009565] iic0 at piixpm0 port 0: I2C bus [ 1.009565] cbb0 at pci0 dev 19 function 0: Ricoh 5C465 PCI-CardBus Bridge (rev. 0x01) [ 1.009565] vga0 at pci0 dev 20 function 0: Neomagic product 0083 (rev. 0x01) [ 1.009565] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation) [ 1.009565] wsmux1: connecting to wsdisplay0 [ 1.009565] drm at vga0 not configured [ 1.009565] isa0 at pcib0 [ 1.009565] lpt0 at isa0 port 0x378-0x37b irq 7 [ 1.009565] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO [ 1.009565] com2 at isa0 port 0x3e8-0x3ef irq 5: ns16550a, 16-byte FIFO [ 1.009565] pckbc0 at isa0 port 0x60-0x64 [ 1.009565] pckbd0 at pckbc0 (kbd slot) [ 1.009565] pckbc0: using irq 1 for kbd slot [ 1.009565] wskbd0 at pckbd0: console keyboard, using wsdisplay0 [ 1.009565] pms0 at pckbc0 (aux slot) [ 1.009565] pckbc0: using irq 12 for aux slot [ 1.009565] wsmouse0 at pms0 mux 0 [ 1.009565] attimer0 at isa0 port 0x40-0x43 [ 1.009565] sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.01 [ 1.009565] audio0 at sb0: playback, capture, half duplex [ 1.009565] audio0: slinear_le:16 -> ulinear_le:8 2ch 20000Hz, blk 400 bytes (10ms) for playback [ 1.009565] audio0: slinear_le:16 <- ulinear_le:8 2ch 20000Hz, blk 400 bytes (10ms) for recording [ 1.009565] midi0 at sb0: SB MIDI UART [ 1.009565] opl0 at sb0: model OPL3 [ 1.009565] midi1 at opl0: SB Yamaha OPL3 [ 1.009565] pcppi0 at isa0 port 0x61 [ 1.009565] midi2 at pcppi0: PC speaker [ 1.009565] sysbeep0 at pcppi0 [ 1.009565] isapnp0 at isa0 port 0x279 [ 1.009565] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.009565] pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq [ 1.009565] pcic0: controller 0 (Intel 82365SL Revision 1) has socket A only [ 1.009565] pcmcia0 at pcic0 controller 0 socket 0 [ 1.009565] attimer0: attached to pcppi0 [ 1.009565] isapnp0: no ISA Plug 'n Play devices found [ 1.009565] cbb0: cacheline 0x0 lattimer 0x40 [ 1.009565] cbb0: bhlc 0x24000 [ 1.009565] cbb0: interrupting at irq 9 [ 1.009565] cardslot0 at cbb0 [ 1.009565] cardbus0 at cardslot0: bus 1 [ 1.009565] pcmcia1 at cardslot0 [ 1.009565] WARNING: system needs entropy for security; see entropy(7) [ 1.076123] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.076123] timecounter: Timecounter "TSC" frequency 134410590 Hz quality 3000 [ 1.078422] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec [ 1.078422] pcic0: controller 0 detecting irqs with mask 0xdeb8: none [ 1.098292] pcic0: autoconfiguration error: no available irq; polling for socket events [ 1.098292] autoconfiguration error: pcic0: WARNING: powerhook_establish is deprecated [ 1.098292] uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.108399] uhub0: 2 ports with 2 removable, self powered [ 1.118193] IPsec: Initialized Security Association Processing. [ 1.207662] wd0 at atabus0 drive 0 [ 1.207662] wd0: <HAGIWARA SYS-COM HFD10P-004GTI> [ 1.207662] wd0: drive supports 1-sector PIO transfers, LBA addressing [ 1.207662] wd0: 3679 MB, 7476 cyl, 16 head, 63 sec, 512 bytes/sect x 7535808 sectors [ 1.217607] wd0: 32-bit data port [ 1.217607] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) [ 1.217607] wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) [ 1.615291] swwdog0: software watchdog initialized [ 1.625259] WARNING: 3 errors while detecting hardware; check system log. [ 1.625259] boot device: wd0 [ 1.625259] root on wd0a dumps on wd0b [ 1.635293] root file system type: ffs [ 1.635293] kern.module.path=/stand/i386/10.0/modules [ 1.635293] WARNING: preposterous TOD clock time [ 1.635293] WARNING: using filesystem time [ 1.643604] WARNING: CHECK AND RESET THE DATE! [ 2.887970] entropy: best effort [ 3.792914] rtk0 at cardbus0 function 0: AboCom FE2000VX 10/100BaseTX [ 3.822538] rtk0: Ethernet address [_MAC_XXXXXXXXXX] [ 3.822538] rlphy0 at rtk0 phy 7: Realtek internal PHY [ 3.832507] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 19.223559] wsdisplay0: screen 1 added (80x25, vt100 emulation) [ 19.253386] wsdisplay0: screen 2 added (80x25, vt100 emulation) [ 19.273276] wsdisplay0: screen 3 added (80x25, vt100 emulation) [ 19.303098] wsdisplay0: screen 4 added (80x25, vt100 emulation)