Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-02-02 10:40:15
From: superbofh
Description: NetBSD Wyse Z Class
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.1 (GENERIC) #0: Fri Dec 20 08:13:37 WET 2024 [ 1.000000] sysop@sparrow:/usr/obj/sys/arch/amd64/compile/GENERIC [ 1.000000] total memory = 1636 MB [ 1.000000] avail memory = 1552 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] RTC BIOS diagnostic error 0x80<clock_battery> [ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.000004] efi: systbl at pa 672e0f18 [ 1.000004] mainbus0 (root) [ 1.000004] ACPI: RSDP 0x00000000673D0014 000024 (v02 3.0G ) [ 1.000004] ACPI: XSDT 0x00000000673D0120 000074 (v01 3.0G WYSEACPI 00000003 PTEC 00000002) [ 1.000004] ACPI: FACP 0x00000000673C4000 0000F4 (v04 WYSE WYSEACPI 00000002 PTL 00000002) [ 1.000004] ACPI: DSDT 0x00000000673C6000 00970D (v01 WYSE WYSEACPI 00001000 PTEC 00000002) [ 1.000004] ACPI: FACS 0x000000006735E000 000040 [ 1.000004] ACPI: HPET 0x00000000673C3000 000038 (v01 WYSE WYSEACPI 00000002 PTL 00000002) [ 1.000004] ACPI: APIC 0x00000000673C2000 00005E (v02 WYSE WYSEACPI 00000002 PTL 00000002) [ 1.000004] ACPI: MCFG 0x00000000673C1000 00003C (v01 WYSE WYSEACPI 00000002 PTL 00000002) [ 1.000004] ACPI: SBST 0x00000000673C0000 000030 (v01 WYSE WYSEACPI 00000002 PTL 00000002) [ 1.000004] ACPI: UEFI 0x00000000673BF000 00003E (v01 WYSE WYSEACPI 00000002 PTL 00000002) [ 1.000004] ACPI: UEFI 0x00000000673BE000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 1.000004] ACPI: SSDT 0x00000000673BC000 00168E (v02 AMD ALIB 00000001 MSFT 04000000) [ 1.000004] ACPI: SSDT 0x00000000673BB000 000F15 (v01 AMD SB800 00000001 INTL 20061109) [ 1.000004] ACPI: UEFI 0x00000000673BA000 000102 (v01 WYSE WYSEACPI 00000002 PTL 00000002) [ 1.000004] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 1.000004] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x21, 24 pins [ 1.000004] cpu0 at mainbus0 apid 0 [ 1.000004] cpu0: Use mfence to serialize rdtsc [ 1.000004] cpu0: AMD G-T56N Processor, id 0x500f20 [ 1.000004] cpu0: node 0, package 0, core 0, smt 0 [ 1.000004] cpu0: searching errata for cpu revision 0x00500f20 [ 1.000004] cpu1 at mainbus0 apid 1 [ 1.000004] cpu1: AMD G-T56N Processor, id 0x500f20 [ 1.000004] cpu1: node 0, package 0, core 1, smt 0 [ 1.000004] acpi0 at mainbus0: Intel ACPICA 20221020 [ 1.000004] acpi0: X/RSDT: OemId <3.0G ,WYSEACPI,00000003>, AslId <PTEC,00000002> [ 1.000004] acpi0: MCFG: segment 0, bus 0-31, address 0x00000000f8000000 [ 1.000004] acpi0: SCI interrupting at int 9 [ 1.000004] acpi0: fixed power button present [ 1.000004] timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 [ 1.004108] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [ 1.004108] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 [ 1.004611] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button [ 1.004611] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 [ 1.004611] spkr0 at pcppi1: PC Speaker [ 1.004611] wsbell at spkr0 not configured [ 1.004611] midi0 at pcppi1: PC speaker [ 1.004611] sysbeep0 at pcppi1 [ 1.004611] attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0 [ 1.004611] pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1 [ 1.004611] pckbc2 at acpi0 (MSE0, PNP0F13) (aux port): irq 12 [ 1.004611] MEM (PNP0C01) at acpi0 not configured [ 1.004611] acpivga0 at acpi0 (VGA): ACPI Display Adapter [ 1.004611] acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device [ 1.004611] acpiout0: autoconfiguration error: failed to test _BQC quirk [ 1.004611] acpiout0: brightness levels: [0,2,4,6,8,10,12,14,16,18,20,22,24,26,28,30,32,34,36,38,40,42,44,46,48,50,52,54,56,58,60,62,64,66,68,70,72,74,76,78,80,82,84,86,88,90,92,94,96,98,100] [ 1.004611] acpivga0: connected output devices: [ 1.004611] acpivga0: 0x0100: Ext. Monitor, head 0, bios detect [ 1.004611] acpivga0: 0x0110 (acpiout0): LCD Panel, head 0, bios detect [ 1.004611] acpivga0: 0x0200: TV, head 0 [ 1.004611] acpivga0: 0x0210: Unknown Output Device, head 0, bios detect [ 1.004611] acpivga0: 0x0220: Unknown Output Device, head 0, bios detect [ 1.004611] acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter [ 1.004611] acpifan0 at acpi0 (Z0F0, PNP0C0B-0): ACPI Fan [ 1.004611] acpifan1 at acpi0 (Z0F1, PNP0C0B-1): ACPI Fan [ 1.004611] acpifan2 at acpi0 (Z0F2, PNP0C0B-2): ACPI Fan [ 1.004611] acpifan3 at acpi0 (Z0F3, PNP0C0B-3): ACPI Fan [ 1.004611] acpitz0 at acpi0 (THZ0): cpu0 [ 1.004611] acpitz0: active cooling level 0: 80.0C [ 1.004611] acpitz0: active cooling level 1: 50.0C [ 1.004611] acpitz0: active cooling level 2: 0.0C [ 1.004611] acpitz0: active cooling level 3: 0.0C [ 1.004611] acpitz0: levels: critical 115.0 C, passive 98.0 C [ 1.004611] ACPI: Enabled 5 GPEs in block 00 to 1F [ 1.004611] attimer1: attached to pcppi1 [ 1.004611] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.004611] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.004611] pchb0 at pci0 dev 0 function 0: AMD Family14h Root Complex (rev. 0x00) [ 1.004611] radeon0 at pci0 dev 1 function 0: ATI Technologies Radeon HD 6320 (rev. 0x00) [ 1.004611] hdaudio0 at pci0 dev 1 function 1: HD Audio Controller [ 1.004611] hdaudio0: interrupting at msi0 vec 0 [ 1.004611] hdaudio0: HDA ver. 1.0, OSS 1, ISS 0, BSS 0, SDO 1, 64-bit [ 1.004611] hdafg0 at hdaudio0: ATI R6xx HDMI [ 1.004611] hdafg0: HDMI00 2ch: Digital Out [Jack] [ 1.004611] hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3 [ 1.004611] audio0 at hdafg0: playback [ 1.004611] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback [ 1.004611] spkr1 at audio0: PC Speaker (synthesized) [ 1.004611] wsbell at spkr1 not configured [ 1.004611] ppb0 at pci0 dev 4 function 0: AMD Family14h PCIe (rev. 0x00) [ 1.004611] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s [ 1.004611] pci1 at ppb0 bus 1 [ 1.004611] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.004611] wm0 at pci1 dev 0 function 0, 64-bit DMA: Intel PRO/1000 PT (82571EB) (rev. 0x06) [ 1.004611] wm0: interrupting at ioapic0 pin 16 [ 1.004611] wm0: PCI-Express bus [ 1.004611] wm0: 2048 words (16 address bits) SPI EEPROM, version 5.11.2, Image Unique ID ffffffff [ 1.004611] wm0: ASPM L1 is disabled to workaround the errata. [ 1.004611] wm0: RX packet buffer size: 32KB [ 1.004611] wm0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.004611] wm0: 0x24040<SPI,PCIE,ASF_FIRM> [ 1.004611] igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 [ 1.004611] igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.004611] wm1 at pci1 dev 0 function 1, 64-bit DMA: Intel PRO/1000 PT (82571EB) (rev. 0x06) [ 1.004611] wm1: interrupting at ioapic0 pin 17 [ 1.004611] wm1: PCI-Express bus [ 1.004611] wm1: 2048 words (16 address bits) SPI EEPROM, version 5.11.2, Image Unique ID ffffffff [ 1.004611] wm1: ASPM L1 is disabled to workaround the errata. [ 1.004611] wm1: RX packet buffer size: 32KB [ 1.004611] wm1: Ethernet address [_MAC_XXXXXXXXXX] [ 1.004611] wm1: 0x24040<SPI,PCIE,ASF_FIRM> [ 1.004611] igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 [ 1.004611] igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.004611] ixpide0 at pci0 dev 17 function 0: ATI Technologies IXP IDE Controller (rev. 0x40) [ 1.004611] ixpide0: bus-master DMA support present [ 1.004611] ixpide0: primary channel configured to compatibility mode [ 1.004611] ixpide0: primary channel interrupting at ioapic0 pin 14 [ 1.004611] atabus0 at ixpide0 channel 0 [ 1.004611] ixpide0: secondary channel configured to compatibility mode [ 1.004611] ixpide0: secondary channel interrupting at ioapic0 pin 15 [ 1.004611] atabus1 at ixpide0 channel 1 [ 1.004611] ohci0 at pci0 dev 18 function 0: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00) [ 1.004611] ohci0: interrupting at ioapic0 pin 18 [ 1.004611] ohci0: OHCI version 1.0, legacy support [ 1.004611] usb0 at ohci0: USB revision 1.0 [ 1.004611] ehci0 at pci0 dev 18 function 2: ATI Technologies SB700-SB900 USB EHCI Controller (rev. 0x00) [ 1.004611] ehci0: 32-bit DMA [ 1.004611] ehci0: interrupting at ioapic0 pin 17 [ 1.004611] ehci0: dropped intr workaround enabled [ 1.004611] ehci0: EHCI version 1.0 [ 1.004611] ehci0: 1 companion controller, 5 ports: ohci0 [ 1.004611] ehci0: Using DMA subregion for control data structures [ 1.004611] usb1 at ehci0: USB revision 2.0 [ 1.004611] ohci1 at pci0 dev 19 function 0: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00) [ 1.004611] ohci1: interrupting at ioapic0 pin 18 [ 1.004611] ohci1: OHCI version 1.0, legacy support [ 1.004611] usb2 at ohci1: USB revision 1.0 [ 1.004611] ehci1 at pci0 dev 19 function 2: ATI Technologies SB700-SB900 USB EHCI Controller (rev. 0x00) [ 1.004611] ehci1: 32-bit DMA [ 1.004611] ehci1: interrupting at ioapic0 pin 17 [ 1.004611] ehci1: dropped intr workaround enabled [ 1.004611] ehci1: EHCI version 1.0 [ 1.004611] ehci1: 1 companion controller, 5 ports: ohci1 [ 1.004611] ehci1: Using DMA subregion for control data structures [ 1.004611] usb3 at ehci1: USB revision 2.0 [ 1.004611] piixpm0 at pci0 dev 20 function 0: ATI Technologies SBx00 SMBus Controller (rev. 0x42) [ 1.004611] piixpm0: interrupting at SMI, [ 1.004611] iic0 at piixpm0 port 0: I2C bus [ 1.004611] iic1 at piixpm0 port 1: I2C bus [ 1.004611] iic2 at piixpm0 port 2: I2C bus [ 1.004611] iic3 at piixpm0 port 3: I2C bus [ 1.004611] hdaudio1 at pci0 dev 20 function 2: HD Audio Controller [ 1.004611] hdaudio1: interrupting at ioapic0 pin 16 [ 1.004611] hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit [ 1.004611] hdafg1 at hdaudio1: Realtek ALC269 [ 1.004611] hdafg1: DAC00 2ch: Speaker [Built-In], HP Out [Jack] [ 1.004611] hdafg1: ADC01 2ch: Mic In [Jack] [ 1.004611] hdafg1: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3 [ 1.004611] audio1 at hdafg1: playback, capture, full duplex, independent [ 1.004611] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback [ 1.004611] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording [ 1.004611] spkr2 at audio1: PC Speaker (synthesized) [ 1.004611] wsbell at spkr2 not configured [ 1.004611] pcib0 at pci0 dev 20 function 3: ATI Technologies SB700-SB900 LPC Host Controller (rev. 0x40) [ 1.004611] ppb1 at pci0 dev 20 function 4: ATI Technologies SBx00 PCI to PCI Bridge (rev. 0x40) [ 1.004611] pci2 at ppb1 bus 2 [ 1.004611] pci2: i/o space, memory space enabled [ 1.004611] ohci2 at pci0 dev 20 function 5: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00) [ 1.004611] ohci2: interrupting at ioapic0 pin 18 [ 1.004611] ohci2: OHCI version 1.0, legacy support [ 1.004611] usb4 at ohci2: USB revision 1.0 [ 1.004611] ppb2 at pci0 dev 21 function 0: ATI Technologies SB700-SB900 PCI to PCI bridge (PCIe 0) (rev. 0x00) [ 1.004611] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s [ 1.004611] pci3 at ppb2 bus 3 [ 1.004611] pci3: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.004611] ppb3 at pci0 dev 21 function 1: ATI Technologies SB700-SB900 PCI to PCI bridge (PCIe 1) (rev. 0x00) [ 1.004611] ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s [ 1.004611] pci4 at ppb3 bus 5 [ 1.004611] pci4: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.004611] re0 at pci4 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06) [ 1.004611] re0: interrupting at msix1 vec 0 [ 1.004611] re0: RTL8168E/8111E-VL (0x2c80) [ 1.004611] re0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.004611] re0: using 256 tx descriptors [ 1.004611] rgephy0 at re0 phy 7: RTL8211E 1000BASE-T media interface [ 1.004611] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.004611] ppb4 at pci0 dev 21 function 2: ATI Technologies SB900 PCI to PCI bridge (PCIe 2) (rev. 0x00) [ 1.004611] ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s [ 1.004611] pci5 at ppb4 bus 6 [ 1.004611] pci5: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.004611] xhci0 at pci5 dev 0 function 0: NEC Renesas Electronics USB 3.0 Host Controller (rev. 0x04) [ 1.004611] xhci0: 64-bit DMA [ 1.004611] xhci0: interrupting at msix2 vec 0 [ 1.004611] xhci0: xHCI version 0.96 [ 1.004611] usb5 at xhci0: USB revision 3.0 [ 1.004611] usb6 at xhci0: USB revision 2.0 [ 1.004611] ohci3 at pci0 dev 22 function 0: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00) [ 1.004611] ohci3: interrupting at ioapic0 pin 18 [ 1.004611] ohci3: OHCI version 1.0, legacy support [ 1.004611] usb7 at ohci3: USB revision 1.0 [ 1.004611] ehci2 at pci0 dev 22 function 2: ATI Technologies SB700-SB900 USB EHCI Controller (rev. 0x00) [ 1.004611] ehci2: 32-bit DMA [ 1.004611] ehci2: interrupting at ioapic0 pin 17 [ 1.004611] ehci2: dropped intr workaround enabled [ 1.004611] ehci2: EHCI version 1.0 [ 1.004611] ehci2: 1 companion controller, 4 ports: ohci3 [ 1.004611] ehci2: Using DMA subregion for control data structures [ 1.004611] usb8 at ehci2: USB revision 2.0 [ 1.004611] pchb1 at pci0 dev 24 function 0: AMD Family12h/14h HyperTransport Configuration (rev. 0x43) [ 1.004611] pchb2 at pci0 dev 24 function 1: AMD Family12h/14h Address Map Configuration (rev. 0x00) [ 1.004611] pchb3 at pci0 dev 24 function 2: AMD Family12h/14h DRAM Configuration (rev. 0x00) [ 1.004611] amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration [ 1.004611] amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family14h) [ 1.004611] pchb4 at pci0 dev 24 function 4: AMD Family12h/14h CPU C-state Configuration (rev. 0x00) [ 1.004611] pchb5 at pci0 dev 24 function 5: AMD Family12h/14h Host Bridge (rev. 0x00) [ 1.004611] pchb6 at pci0 dev 24 function 6: AMD Family12h/14h Misc. Configuration (rev. 0x00) [ 1.004611] pchb7 at pci0 dev 24 function 7: AMD Family12h/14h Host Bridge (rev. 0x00) [ 1.004611] isa0 at pcib0 [ 1.004611] acpicpu0 at cpu0: ACPI CPU [ 1.004611] acpicpu0: C1: HLT, lat 0 us, pow 0 mW [ 1.004611] acpicpu1 at cpu1: ACPI CPU [ 1.004611] ohci3: 1 scheduling overruns [ 1.004611] ohci1: 1 scheduling overruns [ 1.004611] ohci0: 1 scheduling overruns [ 1.004611] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.004611] timecounter: Timecounter "TSC" frequency 1646484000 Hz quality 3000 [ 1.492473] uhub0 at usb5acpiacad0: AC adapter online. [ 1.492473] : NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [ 1.521472] uhub0: 2 ports with 2 removable, self powered [ 1.521472] uhub1 at usb6: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [ 1.561472] uhub1: 2 ports with 2 removable, self powered [ 1.561472] uhub2 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.591472] uhub2: 5 ports with 5 removable, self powered [ 1.591472] uhub3 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.631472] uhub3: 5 ports with 5 removable, self powered [ 1.631472] uhub4 at usb2: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.661472] uhub4: 5 ports with 5 removable, self powered [ 1.661472] uhub5 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.691472] uhub5: 5 ports with 5 removable, self powered [ 1.691472] uhub6 at usb4: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.721472] uhub6: 2 ports with 2 removable, self powered [ 1.721472] uhub7 at usb7: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.761472] uhub7: 4 ports with 4 removable, self powered [ 1.761472] uhub8 at usb8: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.791472] uhub8: 4 ports with 4 removable, self powered [ 1.791472] IPsec: Initialized Security Association Processing. [ 2.791476] urtwn0 at uhub5 port 1 [ 2.791476] urtwn0: Realtek (0x2357) 802.11n NIC (0x010c), rev 2.00/0.00, addr 2 [ 2.911475] urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address [_MAC_XXXXXXXXXX] [ 2.911475] urtwn0: 1 rx pipe, 2 tx pipes [ 4.721477] wd0 at atabus0 drive 0 [ 4.751476] wd0: <16GB SATA Flash Drive> [ 4.791475] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 4.791475] wd0: 15272 MB, 31029 cyl, 16 head, 63 sec, 512 bytes/sect x 31277232 sectors [ 4.831476] wd0: GPT GUID: 7980d0ab-49b7-4d47-8cbd-1e8c7004919b [ 4.841477] dk0 at wd0: "a5ba60dc-4970-4eb9-b8f8-b7fcacb5085e", 262144 blocks at 64, type: msdos [ 4.841477] dk1 at wd0: "68f6f89c-3da8-42e5-87f9-abc30899ea86", 27662400 blocks at 262208, type: ffs [ 4.841477] dk2 at wd0: "e5ceedf7-0c27-4f4b-bf70-363cf74b9e7f", 3352576 blocks at 27924608, type: swap [ 4.854466] wd0: 32-bit data port [ 4.854466] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) [ 4.854466] wd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA), WRITE DMA FUA EXT [ 4.854466] swwdog0: software watchdog initialized [ 4.891477] WARNING: 1 error while detecting hardware; check system log. [ 4.921477] boot device: wd0 [ 4.951477] root on dk1 dumps on dk2 [ 4.991477] root file system type: ffs [ 5.021477] kern.module.path=/stand/amd64/10.1/modules [ 5.051476] [drm] initializing kernel modesetting (PALM 0x1002:0x9806 0x1002:0x9806 0x00). [ 5.051476] [drm] register mmio base: 0x91300000 [ 5.051476] [drm] register mmio size: 262144 [ 5.061483] ATOM BIOS: AMD [ 5.061483] radeon0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) [ 5.061483] radeon0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF [ 5.061483] [drm] Detected VRAM RAM=180M, BAR=256M [ 5.061483] [drm] RAM width 32bits DDR [ 5.061483] Zone kernel: Available graphics memory: 9007199254183798 KiB [ 5.061483] [drm] radeon: 384M of VRAM memory ready [ 5.061483] [drm] radeon: 1024M of GTT memory ready. [ 5.061483] [drm] Loading PALM Microcode [ 5.061483] WARNING: NVRAM century is 33 but RTC year is 2025 [ 5.067678] [drm] Internal thermal controller without fan control [ 5.067678] [drm] Found smc ucode version: 0x00010601 [ 5.067678] [drm] radeon: dpm initialized [ 5.071481] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 5.091480] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [ 5.091480] radeon0: WB enabled [ 5.091480] radeon0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0x0xffffa30d85f06c00 [ 5.091480] radeon0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0x0xffffa30d85f06c0c [ 5.091480] radeon0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0xffffb080a58d2118 [ 5.091480] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.091480] [drm] Driver supports precise vblank timestamp query. [ 5.091480] radeon0: radeon: MSI limited to 32-bit [ 5.091480] radeon0: radeon: using MSI. [ 5.091480] radeon0: interrupting at msi3 vec 0 (radeon0) [ 5.091480] [drm] radeon: irq initialized. [ 5.111476] [drm] ring test on 0 succeeded in 1 usecs [ 5.111476] [drm] ring test on 3 succeeded in 3 usecs [ 5.151475] [drm] ring test on 5 succeeded in 1 usecs [ 5.171476] [drm] UVD initialized successfully. [ 5.171476] [drm] ib test on ring 0 succeeded in 0 usecs [ 5.171476] [drm] ib test on ring 3 succeeded in 0 usecs [ 5.691479] [drm] ib test on ring 5 succeeded [ 5.711477] [drm] Radeon Display Connectors [ 5.711477] [drm] Connector 0: [ 5.711477] [drm] DP-1 [ 5.711477] [drm] HPD2 [ 5.711477] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 5.711477] [drm] Encoders: [ 5.711477] [drm] DFP1: INTERNAL_UNIPHY [ 5.711477] [drm] Connector 1: [ 5.711477] [drm] DVI-D-1 [ 5.711477] [drm] HPD1 [ 5.711477] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 5.711477] [drm] Encoders: [ 5.711477] [drm] DFP2: INTERNAL_UNIPHY [ 5.711477] [drm] Connector 2: [ 5.711477] [drm] VGA-1 [ 5.711477] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [ 5.711477] [drm] Encoders: [ 5.711477] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 5.751477] radeondrmkmsfb0 at radeon0 [ 5.751477] [drm] Initialized radeon 2.50.0 20080528 for radeon0 on minor 0 [ 5.751477] radeondrmkmsfb0: framebuffer at 0x80366000, size 1600x1200, depth 32, stride 6400 [ 5.811477] wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation) [ 5.811477] wsmux1: connecting to wsdisplay0 [ 37.811505] wsdisplay0: screen 1 added (default, vt100 emulation) [ 37.811505] wsdisplay0: screen 2 added (default, vt100 emulation) [ 37.821508] wsdisplay0: screen 3 added (default, vt100 emulation) [ 37.821508] wsdisplay0: screen 4 added (default, vt100 emulation)