Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-02-02 11:33:07
From: ccs
Description: Lenovo M73 Tiny NomadBSD
---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.1-RELEASE-p2 NOMADBSD amd64 FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) VT(efifb): resolution 1600x900 module_register: cannot register pci/re from kernel; already loaded from if_re.ko Module pci/re failed to register: 17 module_register: cannot register re/miibus from kernel; already loaded from if_re.ko Module re/miibus failed to register: 17 CPU: Intel(R) Core(TM) i3-4130T CPU @ 2.90GHz (2893.36-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0x1<XSAVEOPT> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8190922752 (7811 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <LENOVO TC-FH > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 Launching APs: 1 random: entropy device external interface kbd1 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0xf0480-0xf049e smbios0: Version: 2.8, BCD Revision: 2.7 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <LENOVO TC-FH> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 Event timer "HPET5" frequency 14318180 Hz quality 440 Event timer "HPET6" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device hdac0: <Intel Haswell HDA Controller> mem 0xf7d34000-0xf7d37fff irq 16 at device 3.0 on pci0 xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7d20000-0xf7d2ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) em0: <Intel(R) I217-V LPT> port 0xf080-0xf09f mem 0xf7d00000-0xf7d1ffff,0xf7d3d000-0xf7d3dfff irq 20 at device 25.0 on pci0 em0: EEPROM V0.12-4 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7d3c000-0xf7d3c3ff irq 16 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 hdac1: <Intel Lynx Point HDA Controller> mem 0xf7d30000-0xf7d33fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci1: <ACPI PCI bus> on pcib2 iwn0: <Intel Centrino Wireless-N 105> mem 0xf7c00000-0xf7c01fff irq 19 at device 0.0 on pci1 ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7d3b000-0xf7d3b3ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7d3a000-0xf7d3a7ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] est0: <Enhanced SpeedStep Frequency Control> on cpu0 sysctl_warn_reuse: can't re-use a leaf (hw.acpi.cpu.cppc_notify)! Timecounter "TSC-low" frequency 1446649979 Hz quality 1000 Timecounters tick every 1.000 msec hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 hdacc1: <Realtek ALC283 HDA CODEC> at cad 2 on hdac1 hdaa1: <Realtek ALC283 Audio Function Group> at nid 1 on hdacc1 pcm1: <Realtek ALC283 (Front Analog)> at nid 33 and 25 on hdaa1 pcm2: <Realtek ALC283 (Rear Analog Mic)> at nid 26 on hdaa1 ugen0.1: <Intel XHCI root HUB> at usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 uhub0 on usbus0 uhub1 on usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen2.1: <Intel EHCI root HUB> at usbus2 uhub2 on usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 Trying to mount root from ufs:/dev/label/nomadroot [rw,noatime]... ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <PNY CS900 240GB SSD CS900J13> ACS-4 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 228936MB (468862128 512 byte sectors) ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 uhub0: 17 ports with 17 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus0 usbus1 usbus2 uhub2: 2 ports with 2 removable, self powered ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 uhub3 on uhub1 uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 uhub4 on uhub2 uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 ugen0.2: <vendor 0x0c45 USB Wired Keyboard> at usbus0 ukbd0 on uhub0 ukbd0: <vendor 0x0c45 USB Wired Keyboard, class 0/0, rev 2.00/1.30, addr 1> on usbus0 kbd2 at ukbd0 uhub3: 4 ports with 4 removable, self powered uhub4: 6 ports with 6 removable, self powered ugen0.3: <PixArt HP USB Optical Mouse> at usbus0 ums0 on uhub0 ums0: <PixArt HP USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 2> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 ugen0.4: <SanDisk Ultra> at usbus0 umass0 on uhub0 umass0: <SanDisk Ultra, class 0/0, rev 3.00/1.00, addr 3> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x4001 umass0:2:0: Attached to scbus2 Root mount waiting for: CAM Mounting from ufs:/dev/label/nomadroot failed with error 2; retrying for 300 more seconds da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 da0: <SanDisk Ultra 1.00> Removable Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX] da0: 400.000MB/s transfers da0: 29328MB (60063744 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> WARNING: /: TRIM flag on fs but disk does not support TRIM WARNING: /data: TRIM flag on fs but disk does not support TRIM Cuse v0.1.37 @ /dev/cuse ichsmb0: <Intel Lynx Point SMBus controller> port 0x580-0x59f mem 0xf7d39000-0xf7d390ff irq 18 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found ACPI: \134WMI1.WQCA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) wlan0: Ethernet address: [_MAC_XXXXXXXXXX] lo0: link state changed to UP iwn0: iwn_read_firmware: ucode rev=0x12a80601 iwn0: iwn_read_firmware: ucode rev=0x12a80601 iwn0: iwn_send_rxon: is_scanning set, before RXON wlan0: link state changed to UP uhid0 on uhub0 uhid0: <vendor 0x0c45 USB Wired Keyboard, class 0/0, rev 2.00/1.30, addr 1> on usbus0 Security policy loaded: MAC/ntpd (mac_ntpd) [drm] Got Intel graphics stolen memory base 0xdd200000, size 0x2000000 drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io drmn0: [drm] PipeC fused off lkpi_iic0: <LinuxKPI I2C> on drmn0 iicbus0: <Philips I2C bus> on lkpi_iic0 iic0: <I2C generic I/O> on iicbus0 lkpi_iic1: <LinuxKPI I2C> on drmn0 iicbus1: <Philips I2C bus> on lkpi_iic1 iic1: <I2C generic I/O> on iicbus1 lkpi_iic2: <LinuxKPI I2C> on drmn0 iicbus2: <Philips I2C bus> on lkpi_iic2 iic2: <I2C generic I/O> on iicbus2 lkpi_iic3: <LinuxKPI I2C> on drmn0 iicbus3: <Philips I2C bus> on lkpi_iic3 iic3: <I2C generic I/O> on iicbus3 lkpi_iic4: <LinuxKPI I2C> on drmn0 iicbus4: <Philips I2C bus> on lkpi_iic4 iic4: <I2C generic I/O> on iicbus4 lkpi_iic5: <LinuxKPI I2C> on drmn0 iicbus5: <Philips I2C bus> on lkpi_iic5 iic5: <I2C generic I/O> on iicbus5 sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! lkpi_iic6: <LinuxKPI I2C> on drm2 iicbus6: <Philips I2C bus> on lkpi_iic6 iic6: <I2C generic I/O> on iicbus6 [drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0 VT: Replacing driver "efifb" with new "drmfb". start FB_INFO: height=900 width=1600 depth=32 pbase=0xe0000000 vbase=0xfffff800e0000000 name=drmn0 id=i915drmfb flags=0x0 stride=6400 end FB_INFO acpi_video0: <ACPI video extension> on vgapci0 pid 4997 (python3.11), jid 0, uid 0: exited on signal 6 (no core dump - bad address) wlan0: link state changed to DOWN wlan0: link state changed to UP Limiting closed port RST response from 331 to 192 packets/sec WARNING: FUSE protocol violation for server mounted at /usr/local: cache incoherent! To prevent data corruption, disable the data cache by mounting with -o direct_io, or as directed otherwise by your FUSE server's documentation. This warning will not be repeated. pid 88993 (octopkg), jid 0, uid 1001: exited on signal 6 (no core dump - bad address) usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device SanDisk Cruzer Glide (0x0781:0x5575) usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device SanDisk Cruzer Glide (0x0781:0x5575) usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device SanDisk Cruzer Glide (0x0781:0x5575) ugen0.5: <SanDisk Cruzer Glide> at usbus0 umass1 on uhub0 umass1: <SanDisk Cruzer Glide, class 0/0, rev 2.00/1.00, addr 4> on usbus0 umass1: SCSI over Bulk-Only; quirks = 0xc100 umass1:3:1: Attached to scbus3 da1 at umass-sim1 bus 1 scbus3 target 0 lun 0 da1: <SanDisk Cruzer Glide 1.00> Removable Direct Access SPC-4 SCSI device da1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] da1: 40.000MB/s transfers da1: 14955MB (30629376 512 byte sectors) da1: quirks=0x2<NO_6_BYTE> vm_fault: pager read error, pid 52569 (dbus-daemon) ugen0.5: <SanDisk Cruzer Glide> at usbus0 (disconnected) umass1: at uhub0, port 9, addr 4 (disconnected) da1 at umass-sim1 bus 1 scbus3 target 0 lun 0 da1: <SanDisk Cruzer Glide 1.00> s/n 4C530000370408100333 detached (da1:umass-sim1:1:0:0): Periph destroyed umass1: detached drmn0: [drm] *ERROR* Atomic update failure on pipe A (start=15159577 end=15159578) time 0 us, min 894, max 899, scanline start 872, end 901