Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-02-06 08:44:50
From: yamori813
Description: IOData_WN-PL1167EX02 SMP CPU started!
Starting kernel ...
FDT DTB at: 0x802f8920
CPU clock: 880MHz
Timer clock: 440MHz
UART clock: 50MHz
U-Boot args (from 3 args):
argv[1] = console=ttyS1,57600n8
argv[2] = BootImage=1
argv[3] = root=/dev/mtdblock5
Environment:
memsize=128
initrd_start=0x00000000
initrd_size=0x0
flash_start=0x00000000
flash_size=0x0
entry: mips_init()
RAM size: 128MB (from FDT)
Cache info:
picache_stride = 4096
picache_loopcount = 8
pdcache_stride = 4096
pdcache_loopcount = 8
max line size = 32
Physical memory chunk(s):
0x3be000 - 0x7ffffff, 130293760 bytes (31810 pages)
Maxmem is 0x8000000
---<<BOOT>>---
pcpu is available at virtual address 0xc0000000.
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.4-STABLE #14 zrouter_yamori813-n234915-582805a1bd7c-dirty: Thu Feb 6 17:42:18 JST 2025
hiroki@zrouter:/usr/home/hiroki/obj/usr/home/hiroki/ZRouter/tmp/usr/home/hiroki/freebsd-src/mips.mipsel/sys/IOData_WN-PL1167EX02 mips
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "kernel" at 0x803a6df0.
CPU: MIPS Technologies (MT7621 ) processor v47.153
MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes)
L1 i-cache: 4 ways of 256 sets, 32 bytes per line
L1 d-cache: 4 ways of 256 sets, 32 bytes per line
L2 cache: 8 ways of 1024 sets, 32 bytes per line, 256 KiB total size
Config1=0xbea3519e<PerfCount,WatchRegs,MIPS16,EJTAG>
Config2=0x80000447
Config3=0x2000242c<ULRI,DSPP,VInt>
Config7=0x80090500<WII,AR>
real memory = 134217728 (131072K bytes)
Physical memory chunk(s):
0x0044b000 - 0x07dd7fff, 127455232 bytes (31117 pages)
avail memory = 126365696 (120MB)
AP #1 started!
AP #2 started!
AP #3 started!
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: no preloaded entropy cache
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
hostuuid: using 00000000-0000-0000-0000-000000000000
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0.
mem: <memory>
nexus0: <MIPS32 root nexus>
ofwbus0: <Open Firmware Device Tree> on nexus0
clk_fixed0: <Fixed clock> on ofwbus0
clk_fixed1: <Fixed clock> on ofwbus0
palmbus0: <MTK Palmbus> mem 0x1e000000-0x1e0fffff on ofwbus0
simplebus0: <Flattened device tree simple bus> mem 0x600-0x6ff on palmbus0
cpupic0: <MIPS32 Interrupt Controller> on ofwbus0
sysc0: <MTK System Controller> mem 0-0xff on palmbus0
pinctrl0: <MTK Pin Controller> on ofwbus0
pinctrl0: GPIO mode start: 0x000a0528
Processing 1 pin-config node(s) in pinctrl-0 for spi@b00
Processing 1 pin-config node(s) in pinctrl-0 for i2c@900
Processing 1 pin-config node(s) in pinctrl-0 for pinctrl
Processing 1 pin-config node(s) in pinctrl-0 for pcie@1e140000
pinctrl0: GPIO mode end : 0x000891a8
rstctrl0: <MTK Reset Controller> on ofwbus0
clkctrl0: <MTK Clock Controller> on ofwbus0
intc0: <MTK Interrupt Controller (GIC)> mem 0x1fbc0000-0x1fbc1fff on ofwbus0
gpio0: <MTK GPIO Controller (v2)> mem 0-0xff irq 8 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <MTK GPIO Controller (v2)> mem 0-0xff irq 9 on simplebus0
gpiobus1: <OFW GPIO bus> on gpio1
gpio2: <MTK GPIO Controller (v2)> mem 0-0xff irq 10 on simplebus0
gpiobus2: <OFW GPIO bus> on gpio2
cpulist0: <Open Firmware CPU Group> on ofwbus0
palmbus0: <wdt@100> mem 0x100-0x1ff compat mtk,mt7621-wdt (no driver attached)
gpioc0: <GPIO controller> on gpio0
gpioc1: <GPIO controller> on gpio1
gpioc2: <GPIO controller> on gpio2
palmbus0: <memc@5000> mem 0x300-0x3ff compat mtk,mt7621-memc (no driver attached)
palmbus0: <cpc@1fbf0000> mem 0x1fbf0000-0x1fbf7fff compat mtk,mt7621-cpc (no driver attached)
palmbus0: <mc@1fbf8000> mem 0x1fbf8000-0x1fbfffff compat mtk,mt7621-mc (no driver attached)
uart0: <Non-standard ns8250 class UART with FIFOs> mem 0xc00-0xcff irq 7 on palmbus0
uart0: console (57870,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
spi0: <MTK SPI Controller (v2)> mem 0xb00-0xbff on palmbus0
spibus0: <OFW SPI bus> on spi0
mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
mx25l0: Unknown SPI flash device. Vendor: ff, device id: ffff
device_attach: mx25l0 attach returned 6
palmbus0: <i2c@900> mem 0x900-0x9ff compat ralink,i2c-mt7621 (no driver attached)
ofwbus0: <sdhci@1E130000> mem 0x1e130000-0x1e133fff irq 0 compat ralink,mt7620-sdhci (no driver attached)
ofwbus0: <xhci@1E1C0000> mem 0x1e1c0000-0x1e1dffff irq 1 compat mediatek,mt8173-xhci (no driver attached)
ofwbus0: <nand@1e003000> mem 0x1e003000-0x1e0037ff,0x1e003800-0x1e003fff disabled compat mtk,mt7621-nand (no driver attached)
rt0: <Ralink MT7621 onChip Ethernet driver> mem 0x1e100000-0x1e10ffff irq 2 on ofwbus0
rt0: MT7621 Ethernet MAC (rev 0x00000000)
rt0: use hardcoded [_MAC_XXXXXXXXXX] macaddr
rt0: bpf attached
rt0: Ethernet address: [_MAC_XXXXXXXXXX]
mtkswitch0: <MTK Switch Driver> mem 0x1e110000-0x1e117fff irq 3 on ofwbus0
mtkswitch0: attaching PHY 0 failed
mtkswitch0: attaching PHY 1 failed
mtkswitch0: attaching PHY 2 failed
mtkswitch0: attaching PHY 3 failed
mtkswitch0: attaching PHY 4 failed
device_attach: mtkswitch0 attach returned 6
ofwbus0: <pcie@1e140000> mem 0x1e140000-0x1e14ffff irq 4,5,6 type pci compat mediatek,mt7621-pci (no driver attached)
ofwbus0: <gpio-keys-polled> compat gpio-keys-polled (no driver attached)
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 440000000 Hz quality 800
Event timer "MIPS32" frequency 440000000 Hz quality 800
Device configuration finished.
Timecounters tick every 10.000 msec
lo0: bpf attached
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 2048
SMP: AP CPU #1 launched.
SMP: AP CPU #2 launched.
SMTPr:y iAnPg CtPoU m#o3u nlta urnocohte df.r
om cd9660:/dev/flash/spi0s.rootfs.uzip []...
mountroot: waiting for device /dev/flash/spi0s.rootfs.uzip...