Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-03-08 15:28:40
From: Alexander Schreiber
Description: NetBSD 10.1 on Sun V100
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.1 (SUN_V100) #0: Sun Dec 22 16:34:27 CET 2024 [ 1.000000] [_EMAIL_XXXXXXXXX]:/usr/obj/sys/arch/sparc64/compile/SUN_V100 [ 1.000000] total memory = 2048 MB [ 1.000000] avail memory = 1993 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] mainbus0 (root): SUNW,UltraAX-i2 (Sun Fire V100): [_HOSTID_XXXXX] [ 1.000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 548 MHz, CPU id 0 [ 1.000000] cpu0: manuf 17, impl 13, mask 33 [ 1.000000] cpu0: system tick frequency 5.555 MHz [ 1.000000] cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 512K external (64 b/l) [ 1.000000] psycho0 at mainbus0 [ 1.000000] psycho0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 0; PCI bus 0 [ 1.000000] pci0 at psycho0 [ 1.000000] pci0: i/o space, memory space enabled [ 1.000000] ebus0 at pci0 dev 7 function 0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00 [ 1.000000] dma at ebus0 addr 0-ffff ipl 2a not configured [ 1.000000] rtc0 at ebus0 addr 70-71: mc146818 compatible time-of-day clock: m5819 [ 1.000000] power at ebus0 addr 2000-2007 ipl 23 not configured [ 1.000000] lom0 at ebus0 addr 8010-8011 ipl 2a: SUNW,lomh: LOMlite2 rev 3.12 [ 1.000000] lom0: 1 fan(s), 1 PSU(s), 1 temp sensor(s) [ 1.000000] lom0: Watchdog timer configured. [ 1.000000] com0 at ebus0 addr 3f8-3ff ipl 2b: ns16550a, 16-byte FIFO [ 1.000000] com0: console [ 1.000000] com1 at ebus0 addr 2e8-2ef ipl 2b: ns16550a, 16-byte FIFO [ 1.000000] flashprom at ebus0 addr 0-7ffff not configured [ 1.000000] alipm0 at pci0 dev 3 function 0: 74KHz clock [ 1.000000] iic0 at alipm0: I2C bus [ 1.000000] admtemp0 at iic0 addr 0x18: MAX1617A temperature sensor: id. 0x41, rev. 0x34 [ 1.000000] spdmem0 at iic0 addr 0x54 [ 1.000000] spdmem0: SDRAM (registered), data ECC, 512MB, 133MHz (PC-133) [ 1.000000] spdmem0: 13 rows, 11 cols, 1 banks, 4 banks/chip, 7.5ns cycle time [ 1.000000] spdmem0: tAA-tRCD-tRP-tRAS: 3-20-20-44 [ 1.000000] spdmem0: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing) [ 1.000000] spdmem1 at iic0 addr 0x55 [ 1.000000] spdmem1: SDRAM (registered), data ECC, 512MB, 133MHz (PC-133) [ 1.000000] spdmem1: 13 rows, 11 cols, 1 banks, 4 banks/chip, 7.5ns cycle time [ 1.000000] spdmem1: tAA-tRCD-tRP-tRAS: 3-20-20-44 [ 1.000000] spdmem1: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing) [ 1.000000] spdmem2 at iic0 addr 0x56 [ 1.000000] spdmem2: SDRAM (registered), data ECC, 512MB, 133MHz (PC-133) [ 1.000000] spdmem2: 13 rows, 11 cols, 1 banks, 4 banks/chip, 7.5ns cycle time [ 1.000000] spdmem2: tAA-tRCD-tRP-tRAS: 3-20-20-44 [ 1.000000] spdmem2: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing) [ 1.000000] spdmem3 at iic0 addr 0x57 [ 1.000000] spdmem3: SDRAM (registered), data ECC, 512MB, 133MHz (PC-133) [ 1.000000] spdmem3: 13 rows, 11 cols, 1 banks, 4 banks/chip, 7.5ns cycle time [ 1.000000] spdmem3: tAA-tRCD-tRP-tRAS: 3-20-20-44 [ 1.000000] spdmem3: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing) [ 1.000000] seeprom0 at iic0 addr 0x50: i2c-nvram: size 8192 [ 1.000000] seeprom1 at iic0 addr 0x51: motherboard-fru: size 8192 [ 1.000000] tlp0 at pci0 dev 12 function 0: Davicom DM9102A Ethernet, pass 3.1 [ 1.000000] tlp0: interrupting at ivec 3006 [ 1.000000] tlp0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] dmphy0 at tlp0 phy 1: DM9102 10/100 media interface, rev. 0 [ 1.000000] dmphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000000] tlp1 at pci0 dev 5 function 0: Davicom DM9102A Ethernet, pass 3.1 [ 1.000000] tlp1: interrupting at ivec 301c [ 1.000000] tlp1: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] dmphy1 at tlp1 phy 1: DM9102 10/100 media interface, rev. 0 [ 1.000000] dmphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000000] ohci0 at pci0 dev 10 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) [ 1.000000] ohci0: interrupting at ivec 24 [ 1.000000] ohci0: OHCI version 1.0, legacy support [ 1.000000] usb0 at ohci0: USB revision 1.0 [ 1.000000] aceride0 at pci0 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3) [ 1.000000] aceride0: bus-master DMA support present [ 1.000000] aceride0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance [ 1.000000] aceride0: primary channel configured to native-PCI mode [ 1.000000] aceride0: using ivec 280c for native-PCI interrupt [ 1.000000] atabus0 at aceride0 channel 0 [ 1.000000] aceride0: secondary channel configured to native-PCI mode [ 1.000000] atabus1 at aceride0 channel 1 [ 1.000000] pcons at mainbus0 not configured [ 1.000000] WARNING: system needs entropy for security; see entropy(7) [ 1.000000] timecounter: Timecounter "tick-counter" frequency 548000000 Hz quality 100 [ 1.000003] timecounter: Timecounter "stick-counter" frequency 5555555 Hz quality 200 [ 1.000039] No counter-timer -- using STICK at 5.555MHz as system clock. [ 1.000039] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.110035] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.220397] uhub0: 2 ports with 2 removable, self powered [ 4.199988] wd0 at atabus0 drive 0 [ 4.242618] wd0: <PA25-64> [ 4.276910] wd0: drive supports 1-sector PIO transfers, LBA48 addressing [ 4.276910] wd0: 61057 MB, 132322 cyl, 15 head, 63 sec, 512 bytes/sect x 125044736 sectors [ 4.373541] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) [ 4.373541] wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA) [ 4.379995] swwdog0: software watchdog initialized [ 4.435995] root on tlp0 [ 4.466127] nfs_boot: trying DHCP/BOOTP [ 7.539952] nfs_boot: DHCP next-server: X.X.X.X [ 7.600978] nfs_boot: my_name=foo.bar.none [ 7.670595] nfs_boot: my_domain=bar.none [ 7.732939] nfs_boot: my_addr=X.X.X.X [ 7.783855] nfs_boot: my_mask=X.X.X.X [ 7.833728] nfs_boot: gateway=X.X.X.X [ 22.879802] root on quux:/nfsroots/foo [ 22.934250] root file system type: nfs [ 22.978929] kern.module.path=/stand/sparc64/10.1/modules [ 23.459823] entropy: best effort [ 25.129802] ZFS filesystem version: 5