Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2025-03-12 23:53:52
From: yamori813
Description: TCC8930
[   1.0000000] uboot arg = 0, 0xfaa, 0x80000100, 0x2

[   1.0000000] NetBSD/evbarm (tcc893x) booting ...
[   1.0000000] initarm: Configuring system, CLIDR=1110000003 CTR=0x83338003 PMUSERSR=0
[   1.0000000] [ Kernel symbol table missing! ]
[   1.0000000] Loaded initial symtab at 0x803b8674, strtab at 0x803ec1c4, # entries 13218
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[   1.0000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[   1.0000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[   1.0000000]     2024, 2025
[   1.0000000]     The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 10.1_STABLE (TCC893X) #238: Thu Mar 13 08:52:52 JST 2025
[   1.0000000]  hiroki@netbsd2:/usr/home/hiroki/netbsd-src/sys/arch/evbarm/compile/obj/TCC893X
[   1.0000000] total memory = 1024 MB
[   1.0000000] avail memory = 995 MB
[   1.0000000] mainbus0 (root)
[   1.0000000] cpu0 at mainbus0 core 0: 850 MHz Cortex-A9 r2p12 (Cortex V7A core)
[   1.0000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
[   1.0000000] cpu0: L1 32KB/32B 4-way (256 set) VIPT Instruction cache
[   1.0000000] cpu0: L1 32KB/32B 4-way (256 set) write-back-locking-C PIPT Data cache
[   1.0000000] vfp0 at cpu0: VFP 4.0+, rounding, NaN propagation, denormals
[   1.0000000] armperiph0 at mainbus0
[   1.0000000] armgic0 at armperiph0: Generic Interrupt Controller, 160 sources (149 valid)
[   1.0000000] armgic0: 32 Priorities, 128 SPIs, 5 PPIs, 16 SGIs
[   1.0000000] arma9tmr0 at armperiph0: A9 Global 64-bit Timer (1 MHz)
[   1.0000000] arma9tmr0: interrupting on irq 27
[   1.0000000] axi0 at mainbus0: Advanced eXtensible Interface
[   1.0000000] ckc0 at axi0 addr 0x74000000
[   1.0000000] PLL 1 6000000
[   1.0000000] PLL 2 10000000
[   1.0000000] PLL 3 7680000
[   1.0000000] PLL 4 5940000
[   1.0000000] PLL 5 7200000
[   1.0000000] XXX 16 1 19 14
[   1.0000000] 16 480000
[   1.0000000] XXX 12 1 2 7
[   1.0000000] 12 1250000
[   1.0000000] 7 250000000
[   1.0000000] 0 850000000
[   1.0000000] tcc893x_gpio0 at axi0 addr 0x74200000
[   1.0000000] awge0 at axi0 addr 0x71700000 intr 83: GMAC
[   1.0000000] awge0: interrupting on 83
[   1.0000000] awge0: Core version: 00001037
[   1.0000000] awge0: reset timed out
[   1.0000000] awge0: Ethernet address [_MAC_XXXXXXXXXX]
[   1.0000000] awge0: HW feature mask: fa5efff
[   1.0000000] awge0: Using enhanced descriptor format
[   1.0000000] rgephy0 at awge0 phy 0: RTL8211E 1000BASE-T media interface
[   1.0000000] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[   1.0000000] rgephy1 at awge0 phy 1: RTL8211E 1000BASE-T media interface
[   1.0000000] rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[   1.0000000] com0 at axi0 addr 0x76370000-0x7637ffff intr 98: ns16650, no ERS, 16-byte FIFO
[   1.0000000] com0: console
[   1.0000000] ehci0 at axi0 addr 0x71200000-0x71200107 intr 81: USB2.0 Interface
ehci0: ohci or uhci probably not configured
[   1.0000000] ehci0: Using DMA subregion for control data structures
[   1.0000000] usb0 at ehci0: USB revision 2.0
[   1.0000000] WARNING: system needs entropy for security; see entropy(7)
[   1.7315280] gpio0 at tcc893x_gpio0: 64 pins
[   3.5113150] uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[  10.3114540] ehci0: port reset timeout
[  12.0106750] uhub0: port 1 reset failed
[  12.1806070] WARNING: 3 errors while detecting hardware; check system log.
[  13.0617600] boot device: <unknown>
[  14.0204200] root device: