Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-04-05 21:55:56
From: vezhlys
Description: NetBSD on ECS VX900-I with RAID array
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024, 2025
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.99.12 (GENERIC) #279: Sat Apr 5 23:41:37 EEST 2025
andriusv@agraphic-pc:/home/andriusv/obj/sys/arch/amd64/compile/GENERIC
total memory = 3839 MB
avail memory = 3686 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000F9FC0 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000CFFB0100 000054 (v01 033012 XSDT1649 20120330 MSFT 00000097)
ACPI: FACP 0x00000000CFFB0290 0000F4 (v04 033012 FACP1649 20120330 MSFT 00000097)
ACPI: DSDT 0x00000000CFFB0450 004852 (v02 1AOOW 1AOOW015 00000015 INTL 20051117)
ACPI: FACS 0x00000000CFFBE000 000040
ACPI: APIC 0x00000000CFFB0390 000074 (v02 033012 APIC1649 20120330 MSFT 00000097)
ACPI: MCFG 0x00000000CFFB0410 00003C (v01 033012 OEMMCFG 20120330 MSFT 00000097)
ACPI: OEMB 0x00000000CFFBE040 000082 (v01 033012 OEMB1649 20120330 MSFT 00000097)
ACPI: HPET 0x00000000CFFBA450 000038 (v01 033012 VIA HPET 20120330 MSFT 00000097)
ACPI: SSDT 0x00000000CFFBE0D0 000974 (v01 AMI P001PM 00000001 INTL 20051117)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x3, 24 pins
ioapic1 at mainbus0 apid 2: pa 0xfecc0000, version 0x3, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use cpuid to serialize rdtsc
cpu0: VIA Nano L2007@1600MHz, id 0x6f3
cpu0: node 0, package 0, core 0, smt 0
acpi0 at mainbus0: Intel ACPICA 20241212
acpi0: X/RSDT: OemId <033012,XSDT1649,20120330>, AslId <MSFT,00000097>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
NBPE (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
com0 at acpi0 (UAR2, PNP0501-2): io 0x2f8-0x2ff irq 3
com0: ns16550a, 16-byte FIFO
com1 at acpi0 (UAR3, PNP0501-3): io 0x3e8-0x3ef irq 7
com1: ns16550a, 16-byte FIFO
lpt0 at acpi0 (LPTE, PNP0400): io 0x378-0x37f irq 7
com2 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
com2: ns16550a, 16-byte FIFO
acpivga0 at acpi0 (VUMA): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout1: autoconfiguration error: failed to test _BQC quirk
acpiout1: brightness levels: [20,30,40,50,60,80,90,100]
acpiout2 at acpivga0 (TV, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DVI, 0x0120): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0: 0x0110 (acpiout1): LCD Panel, head 0, bios detect
acpivga0: 0x0120 (acpiout3): Unknown Output Device, head 0, bios detect
acpivga0: 0x0200 (acpiout2): TV, head 0, bios detect
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
RMEM (PNP0C01) at acpi0 not configured
acpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpitz0 at acpi0 (THRM)
acpitz0: levels: critical 110.0 C, passive cooling
ACPI: Enabled 6 GPEs in block 00 to 0F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: VIA Technologies VX900 Host Bridge (rev. 0x80)
pchb1 at pci0 dev 0 function 1: VIA Technologies VX900 Error Reporting (rev. 0x00)
pchb2 at pci0 dev 0 function 2: VIA Technologies VX900 CPU Bus Controller (rev. 0x00)
pchb3 at pci0 dev 0 function 3: VIA Technologies VX900 DRAM Controller (rev. 0x00)
pchb4 at pci0 dev 0 function 4: VIA Technologies VX900 Power Management Controller (rev. 0x00)
pchb5 at pci0 dev 0 function 5: VIA Technologies VX900 APIC and Traffic Controller (rev. 0x00)
pchb6 at pci0 dev 0 function 6: VIA Technologies VX900 Scratch Registers (rev. 0x00)
pchb7 at pci0 dev 0 function 7: VIA Technologies VX900 North-South Module Interface Control (rev. 0x00)
vga0 at pci0 dev 1 function 0: VIA Technologies VX900 Graphics [Chrome9 HD] (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
hdaudio0 at pci0 dev 1 function 1: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdaudio0: HDA ver. 1.0, OSS 2, ISS 0, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: VIA VX900 HDMI/DP
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 PCM24 AC3
audio0 at hdafg0: playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
ppb0 at pci0 dev 3 function 0: VIA Technologies VX900 PCI Express Root Port 0 (rev. 0x00)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 3 function 1: VIA Technologies VX900 PCI Express Root Port 1 (rev. 0x00)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 3 function 2: VIA Technologies VX900 PCI Express Root Port 2 (rev. 0x00)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 3 function 3: VIA Technologies VX900 PCI Express Root Port 3 (rev. 0x00)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 5
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci4 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06)
re0: interrupting at msix1 vec 0
re0: RTL8168E/8111E-VL (0x2c80)
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8211E 1000BASE-T media interface
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
pchb8 at pci0 dev 3 function 4: VIA Technologies VX900 PCI Express Physical Layer Electrical Sub-block (rev. 0x00)
viaide0 at pci0 dev 15 function 0: VIA Technologies VX900/VX11 SATA controller (RAID mode) (rev. 0x00)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
viaide0: using ioapic0 pin 21 for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 0xa0)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 0xa0)
uhci1: interrupting at ioapic0 pin 22
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 0xa0)
uhci2: interrupting at ioapic0 pin 21
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 16 function 3: VIA Technologies VT83C572 USB Controller (rev. 0xa0)
uhci3: interrupting at ioapic0 pin 23
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 16 function 4: VIA Technologies VT8237 EHCI USB Controller (rev. 0x90)
ehci0: 32-bit DMA
ehci0: interrupting at ioapic0 pin 23
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: 4 companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
ehci0: Using DMA subregion for control data structures
usb4 at ehci0: USB revision 2.0
pcib0 at pci0 dev 17 function 0: VIA Technologies VX900 Bus Control and Power Management (rev. 0x00)
pchb9 at pci0 dev 17 function 7: VIA Technologies VX8xx/VX900 South-North Module Interface Control (rev. 0x00)
ppb4 at pci0 dev 19 function 0: VIA Technologies VX8xx/VX900 PCI to PCI Bridge (rev. 0x00)
pci5 at ppb4 bus 6
pci5: i/o space, memory space enabled
hdaudio1 at pci0 dev 20 function 0: HD Audio Controller
hdaudio1: interrupting at msi2 vec 0
hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg1 at hdaudio1: VIA VT1708S
hdafg1: DAC00 2ch: Speaker [Jack], HP Out [Jack]
hdafg1: ADC01 2ch: Line In [Jack], Mic In [Jack]
hdafg1: 2ch/2ch 48000Hz PCM16*
audio1 at hdafg1: playback, capture, full duplex, independent
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr2 at audio1: PC Speaker (synthesized)
wsbell at spkr2 not configured
isa0 at pcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: P0: FFH, lat 20 us, pow 0 mW, 1600 MHz
acpicpu0: P1: FFH, lat 20 us, pow 0 mW, 1400 MHz
acpicpu0: P2: FFH, lat 20 us, pow 0 mW, 1300 MHz
acpicpu0: P3: FFH, lat 20 us, pow 0 mW, 1200 MHz
acpicpu0: P4: FFH, lat 20 us, pow 0 mW, 1100 MHz
acpicpu0: P5: FFH, lat 20 us, pow 0 mW, 1000 MHz
acpicpu0: P6: FFH, lat 20 us, pow 0 mW, 900 MHz
acpicpu0: P7: FFH, lat 20 us, pow 0 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 94 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 82 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 70 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 58 %
acpicpu0: T8: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T9: I/O, lat 1 us, pow 0 mW, 46 %
acpicpu0: T10: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T11: I/O, lat 1 us, pow 0 mW, 34 %
acpicpu0: T12: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T13: I/O, lat 1 us, pow 0 mW, 22 %
acpicpu0: T14: I/O, lat 1 us, pow 0 mW, 16 %
acpicpu0: T15: I/O, lat 1 us, pow 0 mW, 10 %
viac7temp0 at cpu0: VIA C7/Nano temperature sensor
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
wd0 at atabus0 drive 0
wd0: <Patriot P220 128GB>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 119 GB, 248085 cyl, 16 head, 63 sec, 512 bytes/sect x 250069680 sectors
wd0: mbr partition exceeds disk size
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd1 at atabus0 drive 1
wd1: <SAMSUNG HD161HJ>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7, NCQ (32 tags)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA), WRITE DMA FUA EXT
wd1(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd0: mbr partition exceeds disk size
wd0: mbr partition exceeds disk size
wd0: mbr partition exceeds disk size
swwdog0: software watchdog initialized
wd0: mbr partition exceeds disk size
wd0: mbr partition exceeds disk size
wd0: mbr partition exceeds disk size
wd0: mbr partition exceeds disk size
wd0: mbr partition exceeds disk size
ataraid0: found 1 RAID volume
ld0 at ataraid0 vendtype 2 unit -2008953180: VIA V-RAID ATA RAID-0 array
wd0: mbr partition exceeds disk size
ld0: 238 GB, 31132 cyl, 255 head, 63 sec, 512 bytes/sect x 500139264 sectors (0 bytes/physsect)
WARNING: 1 error while detecting hardware; check system log.
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
kern.module.path=/stand/amd64/10.99.12/modules
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)