Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-04-25 11:45:57
From: Pawel Chwalowski
Description: NetBSD/amd64 10.1 on Oracle Cloud VM.Standard.E2.1.Micro (2.0 GHz AMD EPYC™ 7551 (Naples))
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 1018 MB
avail memory = 958 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa 3f9ed018
mainbus0 (root)
ACPI: RSDP 0x000000003FB7D014 000024 (v02 BOCHS )
ACPI: XSDT 0x000000003FB7C0E8 00004C (v01 BOCHS BXPC 00000001 01000013)
ACPI: FACP 0x000000003FB79000 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
ACPI: DSDT 0x000000003FB7A000 00198B (v01 BOCHS BXPC 00000001 BXPC 00000001)
ACPI: FACS 0x000000003FBDC000 000040
ACPI: APIC 0x000000003FB78000 000080 (v01 BOCHS BXPC 00000001 BXPC 00000001)
ACPI: HPET 0x000000003FB77000 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
ACPI: WAET 0x000000003FB76000 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
ACPI: BGRT 0x000000003FB75000 000038 (v01 INTEL EDK2 00000002 01000013)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x11, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use mfence to serialize rdtsc
cpu0: AMD EPYC 7551 32-Core Processor , id 0x800f12
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: AMD EPYC 7551 32-Core Processor , id 0x800f12
cpu1: node 0, package 0, core 0, smt 1
acpi0 at mainbus0: Intel ACPICA 20221020
acpi0: X/RSDT: OemId <BOCHS ,BXPC ,00000001>, AslId < ,01000013>
LNKS: ACPI: Found matching pin for 0.1.INTA at func 3: 10
LNKS: BIOS IRQ 10 for 0.1.INTA is invalid
LNKD: ACPI: Found matching pin for 0.1.INTD at func 2: 11
LNKC: ACPI: Found matching pin for 0.3.INTA at func 0: 11
LNKD: ACPI: Found matching pin for 0.4.INTA at func 0: 11
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
acpi0: fixed sleep button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 100000000 Hz quality 2000
qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b
qemufwcfg0: <QEMU>
PEVT (QEMU0001) at acpi0 not configured
com0 at acpi0 (COM1, PNP0501-1): io 0x3f8-0x3ff irq 4
com0: ns16550a, 16-byte FIFO
com0: console
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12
fdc0 at acpi0 (FDC0, PNP0700): io 0x3f2-0x3f5,0x3f7 irq 6 drq 2
ACPI: Enabled 2 GPEs in block 00 to 0F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel 82441FX (PMC) PCI and Memory Controller (rev. 0x02)
pcib0 at pci0 dev 1 function 0: Intel 82371SB (PIIX3) PCI-ISA Bridge (rev. 0x00)
piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel ignored (disabled)
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 1 function 2: Intel 82371SB (PIIX3) USB Host Controller (rev. 0x01)
uhci0: interrupting at ioapic0 pin 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 1 function 3: Intel 82371AB (PIIX4) Power Management Controller (rev. 0x03)
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 1000
piixpm0: 24-bit timer
piixpm0: interrupting at ioapic0 pin 9
iic0 at piixpm0 port 0: I2C bus
genfb0 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02)
genfb0: framebuffer at 0x80000000, size 1024x768, depth 32, stride 4096
wsdisplay0 at genfb0 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
drm at genfb0 not configured
virtio0 at pci0 dev 3 function 0
virtio0: network device (id 1, rev. 0x00)
vioif0 at virtio0: features: 0x31870020<EVENT_IDX,INDIRECT_DESC,NOTIFY_ON_EMPTY,CTRL_MAC,CTRL_RX,CTRL_VQ,STATUS,MAC>
vioif0: Ethernet address [_MAC_XXXXXXXXXX]
virtio0: allocated 20480 byte for virtqueue 0 for rx0, size 256
virtio0: using 8192 byte (512 entries) indirect descriptors
virtio0: allocated 20480 byte for virtqueue 1 for tx0, size 256
virtio0: using 8192 byte (512 entries) indirect descriptors
virtio0: allocated 8192 byte for virtqueue 2 for control, size 64
virtio0: config interrupting at msix0 vec 0
virtio0: queues interrupting at msix0 vec 1
virtio1 at pci0 dev 4 function 0
virtio1: SCSI device (id 8, rev. 0x00)
vioscsi0 at virtio1: features: 0x10000000<INDIRECT_DESC>
virtio1: allocated 86016 byte for virtqueue 0 for control, size 256
virtio1: using 73728 byte (4608 entries) indirect descriptors
virtio1: allocated 86016 byte for virtqueue 1 for event, size 256
virtio1: using 73728 byte (4608 entries) indirect descriptors
virtio1: allocated 86016 byte for virtqueue 2 for request, size 256
virtio1: using 73728 byte (4608 entries) indirect descriptors
vioscsi0: cmd_per_lun 128 qsize 256 seg_max 254 max_target 255 max_lun 16383
virtio1: config interrupting at msix1 vec 0
virtio1: queues interrupting at msix1 vec 1
scsibus0 at vioscsi0: 256 targets, 16384 luns per target
isa0 at pcib0
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
spkr0 at pcppi0: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer0: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
vmt0 at cpu0
vmt0: UUID: f9de3efb-716f-4c85-bd65-9b25b9a6ead9
vmware: open failed, eax=0xffffffff, ecx=0x1e, edx=0x5658
vmt0: autoconfiguration error: failed to open backdoor RPC channel (TCLO protocol)
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
IPsec: Initialized Security Association Processing.
sd0 at scsibus0 target 0 lun 1: <ORACLE, BlockVolume, 1.0> disk fixed
uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
sd0: fabricating a geometry
sd0: 47694 MB, 47694 cyl, 64 head, 32 sec, 512 bytes/sect x 97677312 sectors
sd0: fabricating a geometry
sd0: GPT GUID: aad26f69-f5f5-4bda-a084-043f147b4fdb
dk0 at sd0: "d085f97c-b761-4815-b8ed-d3d186738eb4", 262144 blocks at 64, type: msdos
dk1 at sd0: "eda9276e-ec31-41c6-b069-2179964f4ca4", 93218816 blocks at 262208, type: ffs
dk2 at sd0: "beef74e0-4080-4499-a2a3-473e330b15f5", 4194304 blocks at 93481024, type: swap
sd0: async, 8-bit transfers, tagged queueing
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: QEMU (0x0627) QEMU USB Tablet (0x0001), rev 2.00/0.00, addr 2, iclass 3/0
ums0 at uhidev0: 3 buttons and Z dir
wsmouse1 at ums0 mux 0
swwdog0: software watchdog initialized
WARNING: 1 error while detecting hardware; check system log.
boot device: sd0
root on dk1 dumps on dk2
root file system type: ffs
kern.module.path=/stand/amd64/10.1/modules
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)