Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2025-05-07 19:10:24
From: carsten
Description: FreeBSD/amd64 on System manufacturer System Product Name
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.2-RELEASE-p1 GENERIC amd64
FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67)
VT(vga): resolution 640x480
module_register: cannot register tmpfs from kernel; already loaded from tmpfs.ko
Module tmpfs failed to register: 17
CPU: Intel(R) Core(TM) i7 CPU       X 980  @ 3.33GHz (3341.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x206c2  Family=0x6  Model=0x2c  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x29ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AESNI>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 25769803776 (24576 MB)
avail memory = 24972161024 (23815 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <111610 APIC1807>
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
random: unblocking device.
ioapic1: MADT APIC ID 7 != hw id 8
ioapic0 <Version 2.0> irqs 0-23
ioapic1 <Version 2.0> irqs 24-47
Launching APs: 1 7 3 9 4 11 6 2 10 8 5
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xfc5e0-0xfc5fe
smbios0: Version: 2.5, BCD Revision: 2.5
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <111610 RSDT1807>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ahci0: <Marvell 88SE912x AHCI SATA controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem 0xfb7ff800-0xfb7fffff irq 28 at device 0.0 on pci1
ahci0: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported
ahci0: quirks=0x1000900<NOBSYRES,ALTSIG,IOMMU_BUSWIDE>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich6: <AHCI channel> at channel 6 on ahci0
ahcich7: <AHCI channel> at channel 7 on ahci0
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfb8fe000-0xfb8fffff irq 29 at device 0.0 on pci2
xhci0: 32 bytes context size, 32-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xfb9c0000-0xfb9dffff irq 24 at device 0.0 on pci3
vgapci0: Boot video device
hdac0: <ATI RV910 HDA Controller> mem 0xfb9fc000-0xfb9fffff irq 34 at device 0.1 on pci3
pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xd880-0xd89f mem 0xfbaa0000-0xfbabffff,0xfba80000-0xfba9ffff irq 30 at device 0.0 on pci4
em0: EEPROM V5.6-2
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xdc00-0xdc1f mem 0xfbae0000-0xfbafffff,0xfbac0000-0xfbadffff irq 37 at device 0.1 on pci4
em1: EEPROM V5.6-2
em1: Using 1024 TX descriptors and 1024 RX descriptors
em1: Using an MSI interrupt
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 1/1024, RX 1/1024
pcib5: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib5
igb0: <Intel(R) I340 82580 (Copper)> mem 0xfbb80000-0xfbbfffff,0xfbd70000-0xfbd73fff irq 32 at device 0.0 on pci5
igb0: EEPROM V3.19-0 eTrack 0x00013bdb
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 6 RX queues 6 TX queues
igb0: Using MSI-X interrupts with 7 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: netmap queues/slots: TX 6/1024, RX 6/1024
igb1: <Intel(R) I340 82580 (Copper)> mem 0xfbc00000-0xfbc7ffff,0xfbd74000-0xfbd77fff irq 42 at device 0.1 on pci5
igb1: EEPROM V3.19-0 eTrack 0x00013bdb
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 6 RX queues 6 TX queues
igb1: Using MSI-X interrupts with 7 vectors
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: netmap queues/slots: TX 6/1024, RX 6/1024
igb2: <Intel(R) I340 82580 (Copper)> mem 0xfbc80000-0xfbcfffff,0xfbd78000-0xfbd7bfff irq 47 at device 0.2 on pci5
igb2: EEPROM V3.19-0 eTrack 0x00013bdb
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 6 RX queues 6 TX queues
igb2: Using MSI-X interrupts with 7 vectors
igb2: Ethernet address: [_MAC_XXXXXXXXXX]
igb2: netmap queues/slots: TX 6/1024, RX 6/1024
igb3: <Intel(R) I340 82580 (Copper)> mem 0xfbd80000-0xfbdfffff,0xfbd7c000-0xfbd7ffff irq 41 at device 0.3 on pci5
igb3: EEPROM V3.19-0 eTrack 0x00013bdb
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 6 RX queues 6 TX queues
igb3: Using MSI-X interrupts with 7 vectors
igb3: Ethernet address: [_MAC_XXXXXXXXXX]
igb3: netmap queues/slots: TX 6/1024, RX 6/1024
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xa800-0xa81f irq 16 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus1 on uhci0
usbus1: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xa880-0xa89f irq 21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus2 on uhci1
usbus2: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xac00-0xac1f irq 19 at device 26.2 on pci0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
usbus3: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfb6ff000-0xfb6ff3ff irq 18 at device 26.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
usbus4: 480Mbps High Speed USB v2.0
hdac1: <Intel 82801JI HDA Controller> mem 0xfb6f8000-0xfb6fbfff irq 22 at device 27.0 on pci0
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xa080-0xa09f irq 23 at device 29.0 on pci0
uhci3: LegSup = 0x2f00
usbus5 on uhci3
usbus5: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xa400-0xa41f irq 19 at device 29.1 on pci0
uhci4: LegSup = 0x2f00
usbus6 on uhci4
usbus6: 12Mbps Full Speed USB v1.0
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xa480-0xa49f irq 18 at device 29.2 on pci0
uhci5: LegSup = 0x2f00
usbus7 on uhci5
usbus7: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfb6fe000-0xfb6fe3ff irq 23 at device 29.7 on pci0
usbus8: EHCI version 1.0
usbus8 on ehci1
usbus8: 480Mbps High Speed USB v2.0
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pci6: <serial bus, FireWire> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci1: <Intel ICH10 AHCI SATA controller> port 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x941f mem 0xfb6fc000-0xfb6fc7ff irq 20 at device 31.2 on pci0
ahci1: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich8: <AHCI channel> at channel 0 on ahci1
ahcich9: <AHCI channel> at channel 1 on ahci1
ahcich10: <AHCI channel> at channel 2 on ahci1
ahcich11: <AHCI channel> at channel 3 on ahci1
ahcich12: <AHCI channel> at channel 4 on ahci1
ahcich13: <AHCI channel> at channel 5 on ahci1
ahciem0: <AHCI enclosure management bridge> on ahci1
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd3fff pnpid ORM0000 on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
module_register_init: MOD_LOAD (tmpfs, 0xffffffff80c156d0, 0xffffffff824c5cb0) error 17
Timecounter "TSC-low" frequency 1670454269 Hz quality 1000
Timecounters tick every 1.000 msec
ugen6.1: <Intel UHCI root HUB> at usbus6
ugen8.1: <Intel EHCI root HUB> at usbus8
ugen4.1: <Intel EHCI root HUB> at usbus4
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen5.1: <Intel UHCI root HUB> at usbus5
ugen0.1: <(0x1033) XHCI root HUB> at usbus0
ugen3.1: <Intel UHCI root HUB> at usbus3
ugen7.1: <Intel UHCI root HUB> at usbus7
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub0 on usbus6
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub1 on usbus1
uhub2 on usbus4
uhub3 on usbus2
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub4 on usbus7
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
uhub5 on usbus3
uhub6 on usbus5
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub7 on usbus0
uhub7: <(0x1033) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub8 on usbus8
uhub8: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC889 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC889 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC889 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
pcm2: <Realtek ALC889 (Front Analog)> at nid 27 and 25 on hdaa1
pcm3: <Realtek ALC889 (Onboard Digital)> at nid 30 on hdaa1
pcm4: <Realtek ALC889 (Rear Digital)> at nid 17 on hdaa1
sysctl_unregister_oid: failed(22) to unregister sysctl(tmpfs)
Trying to mount root from zfs:zroot/ROOT/default []...
uhub6: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub7: 4 ports with 4 removable, self powered
Root mount waiting for: CAM usbus4 usbus8
Root mount waiting for: CAM usbus4 usbus8
uhub8: 6 ports with 6 removable, self powered
uhub2: 6 ports with 6 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ahcich7: Poll timeout on slot 2 port 0
ahcich7: is 00000000 cs 00000004 ss 00000000 rs 00000004 tfd 50 serr 00000000 cmd 10004016
(aprobe2:ahcich7:0:0:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe2:ahcich7:0:0:0): CAM status: Command timeout
(aprobe2:ahcich7:0:0:0): Error 5, Retries exhausted
Root mount waiting for: CAM
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST2000VN000-1H3164 SC42> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST2000VX003-1HH164 CV11> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors)
ada2 at ahcich8 bus 0 scbus8 target 0 lun 0
ada2: <TOSHIBA HDWD110 MS2OA8R0> ATA8-ACS SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXXX]
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 953869MB (1953525168 512 byte sectors)
ada3 at ahcich9 bus 0 scbus9 target 0 lun 0
ada3: <TOSHIBA HDWD110 MS2OA8R0> ATA8-ACS SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXXX]
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 953869MB (1953525168 512 byte sectors)
ada4 at ahcich10 bus 0 scbus10 target 0 lun 0
ada4: <ST4000VN006-3CW104 SC60> ACS-3 ATA SATA 3.x device
ada4: [_SERIAL_NUMBER_XXXXX]
ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 3815447MB (7814037168 512 byte sectors)
ada5 at ahcich11 bus 0 scbus11 target 0 lun 0
ada5: <WDC WD30EFRX-68EUZN0 82.00A82> ACS-2 ATA SATA 3.x device
ada5: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada5: Command Queueing enabled
ada5: 2861588MB (5860533168 512 byte sectors)
ada5: quirks=0x1<4K>
ada6 at ahcich12 bus 0 scbus12 target 0 lun 0
ada6: <WDC WD30EFRX-68EUZN0 82.00A82> ACS-2 ATA SATA 3.x device
ada6: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada6: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada6: Command Queueing enabled
ada6: 2861588MB (5860533168 512 byte sectors)
ada6: quirks=0x1<4K>
ada7 at ahcich13 bus 0 scbus13 target 0 lun 0
ada7: <WDC WD30EFRX-68EUZN0 82.00A82> ACS-2 ATA SATA 3.x device
ada7: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada7: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada7: Command Queueing enabled
ada7: 2861588MB (5860533168 512 byte sectors)
ada7: quirks=0x1<4K>
ses0 at ahciem0 bus 0 scbus14 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: ada2,pass2 in 'Slot 00', SATA Slot: scbus8 target 0
ses0: ada3,pass3 in 'Slot 01', SATA Slot: scbus9 target 0
ses0: ada4,pass4 in 'Slot 02', SATA Slot: scbus10 target 0
ses0: ada5,pass5 in 'Slot 03', SATA Slot: scbus11 target 0
ses0: ada6,pass6 in 'Slot 04', SATA Slot: scbus12 target 0
ses0: ada7,pass7 in 'Slot 05', SATA Slot: scbus13 target 0
GEOM: ada0: the primary GPT table is corrupt or invalid.
GEOM: ada0: using the secondary instead -- recovery strongly advised.
GEOM_MIRROR: Device mirror/swap launched (2/2).
ichsmb0: <Intel 82801JI (ICH10) SMBus controller> port 0x1000-0x101f mem 0xfb6fd000-0xfb6fd0ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device