Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-06-04 02:49:50
From: yamori813
Description: M83XXX with sata
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024, 2025 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.1_STABLE (M83XXX) #5: Wed Jun 4 11:46:36 JST 2025 [ 1.000000] hiroki@netbsd:/usr/home/hiroki/obj/sys/arch/evbarm/compile/M83XXX [ 1.000000] total memory = 128 MB [ 1.000000] avail memory = 120 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] mainbus0 (root) [ 1.000000] cpu0 at mainbus0 core 0: ARM1136J-S r1p5 (ARM11J V6J core) [ 1.000000] cpu0: DC enabled IC enabled WB enabled LABT [ 1.000000] cpu0: L1 64KB/32B 4-way (512 set) VIPT Instruction cache [ 1.000000] cpu0: L1 64KB/32B 4-way (512 set) write-back-locking-C VIPT Data cache [ 1.000000] cfi0 at mainbus0 [ 1.000000] cfi0: CFI NOR flash 32 MB x8/x16 [ 1.000000] nor0 at cfi0 [ 1.000000] nor0: page size: 64, spare size: 0, block size: 128 KB [ 1.000000] nor0: LUN size: 256 blocks, LUNs: 1, total storage size: 32 MB [ 1.000000] flash0 at nor0, size 256 KB, offset 0, read only [ 1.000000] flash0: erase size 128 KB bytes, write size 64 bytes [ 1.000000] flash1 at nor0, size 128 KB, offset 0x40000, read only [ 1.000000] flash1: erase size 128 KB bytes, write size 64 bytes [ 1.000000] ahb0 at mainbus0: AMBA Advanced High Performance Bus [ 1.000000] apb0 at ahb0 addr 0x10000000: AHB to APB Bus Bridge [ 1.000000] intc0 at apb0 addr 0x100a0000: interrupts 0..63 [ 1.000000] m83pmc0 at apb0 addr 0x100b0000: PMC [ 1.000000] m83gpio0 at apb0 addr 0x10070000 intr 33 [ 1.000000] com0 at apb0 addr 0x10090000-0x10093fff intr 41: ns16650, no ERS, 16-byte FIFO [ 1.000000] com0: console [ 1.000000] timer0 at apb0 addr 0x10050000 intr 31: sys clock [ 1.000000] timer1 at apb0 addr 0x10050000 intr 30: stat clock [ 1.000000] cge0 at apb0 addr 0x100d0000 intr 6: GEMAC Interface [ 1.000000] cge0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] athsw0 at cge0 phy 0 [ 1.000000] athsw0: AR8316 Ethernet Switch (ver 16 rev 1) [ 1.000000] athsw0: MAC port == RGMII, port 4 = switch port [ 1.000000] cge1 at apb0 addr 0x10190000 intr 7: GEMAC Interface [ 1.000000] cge1: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] ehci0 at ahb0 addr 0xf000000-0xf7fffff intr 5: USB Interface [ 1.000000] ehci0: EHCI version 1.0 [ 1.000000] usb0 at ehci0: USB revision 2.0 [ 1.000000] m83pcie0 at ahb0 addr 0x10010000-0x1001ffff intr 14: PCIe Interface [ 1.000000] pci0 at m83pcie0 bus 0 [ 1.000000] pci0: memory space enabled [ 1.000000] ahcisata0 at pci0 dev 0 function 0: vendor 1b21 product 0612 (rev. 0x02) [ 1.000000] ahcisata0: AHCI revision 1.20, 2 ports, 32 slots, CAP 0xeb32ffa1<SXS,CCCS,PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SSS,SSNTF,SNCQ,S64A> [ 1.000000] ahcisata0: interrupting at pci [ 1.000000] atabus0 at ahcisata0 channel 0 [ 1.000000] atabus1 at ahcisata0 channel 1 [ 1.000000] WARNING: system needs entropy for security; see entropy(7) [ 1.000003] timecounter: Timecounter "m83tmr" frequency 165000000 Hz quality 100 [ 1.000004] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.000004] gpio0 at m83gpio0: 32 pins [ 1.030003] uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.030003] uhub0: 1 port with 1 removable, self powered [ 1.141694] ahcisata0 port 1: device present, speed: 3.0Gb/s [ 3.040747] wd0 at atabus1 drive 0 [ 3.040747] wd0: <WDC WD3200BEVT-22A23T0> [ 3.040747] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 3.040747] wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors [ 3.040747] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO [ 3.040747] wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO [ 3.040747] boot device: <unknown> [ 3.040747] root on wd0a dumps on wd0b [ 4.344029] kern.module.path=/stand/evbarm/10.1/modules [ 4.344029] WARNING: no TOD clock present [ 4.344029] WARNING: using filesystem time [ 4.363348] WARNING: CHECK AND RESET THE DATE! [ 5.485954] entropy: best effort [ 7.211225] entropy: ready